What is the fuel tank capacity of the 2020 Magotan?

1 Answers
VanJohn
07/29/25 11:20pm
The fuel tank capacity of the 2020 Magotan is 66 liters, which is the officially announced data. Owners who have purchased the 2020 Magotan can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the 2020 Magotan is 95 octane, with a fuel consumption of 7.2-9.1L per 100 kilometers. A full tank of fuel can cover a distance of 725-916 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. Generally, the fuel level is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is the volume from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity.
Was this review help?
16
2
Share
More Forum Discussions

How to set up the automatic downward tilt of the rearview mirror when reversing in the Tiguan L?

Tiguan L how to set up the automatic downward tilt of the rearview mirror when reversing, the steps are as follows: 1. First, start the engine, at this time you need to step on the brake pedal and shift into R gear; 2. Turn the rearview mirror angle adjustment knob to the R position; 3. After adjusting to the desired downward tilt angle, turn off the engine. The next time you shift into R gear, the rearview mirror will automatically tilt downward. Below is the relevant introduction of the rearview mirror downward tilt function: The rearview mirror downward tilt is a very useful function. When reversing or parking by the roadside, the downward-tilted rearview mirror allows the driver to see the wheel rim and tire, which can avoid the wheel rim from scraping against the curb. If the car does not have the rearview mirror downward tilt function, you can manually adjust the rearview mirror to tilt downward when reversing or parking by the roadside. Most vehicles are equipped with electric adjustment rearview mirrors, making it equally convenient to adjust.
9
4
Share

What Are the Causes of Car Body Shaking?

Here are the causes of car body shaking and their solutions: 1. Unstable oil pressure: Abnormal fuel pump supply pressure or incorrect readings and poor performance of the intake pressure sensor can cause car body shaking. Solution: Check the oil pressure and replace components if necessary. 2. Aging engine components: Car shaking can also be related to worn engine mounts. Engine mounts act as the shock absorption system for the engine, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can transfer to the steering wheel and the cabin, causing shaking at idle. Solution: Replace the components. 3. Severe engine carbon buildup: Dirty throttle body or excessive carbon deposits in the fuel injectors. When there is too much carbon buildup inside the engine, the fuel sprayed by the cold-start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start the engine. Solution: Clean the fuel system and check if the idle control valve has carbon buildup that needs cleaning.
19
1
Share

Where is the USB port of the Mercedes-Benz GLC260?

The Mercedes-Benz GLC260 has a total of three USB ports, with two located inside the center armrest and one near the rear air conditioning vents. Below is some relevant information about the USB ports: 1. The USB ports can be used to charge electronic devices or connect devices to play music, greatly enhancing the convenience of the driving experience. 2. As of November 2019, most cars on the market are equipped with USB ports. The location of the USB ports may vary depending on the vehicle model. Typically, USB ports are found on the central panel, inside the center armrest, or near the rear air vents. To locate the USB ports, it is advisable to refer to the vehicle's user manual beforehand. 3. USB ports offer multiple functions. For instance, you can connect a USB flash drive to the car via the USB port, allowing the car's multimedia entertainment system to play songs stored on the flash drive.
19
5
Share

What is the function of anti-skid control?

Anti-skid control system, represented by a car icon with two inverted wavy lines (similar to a reversed letter S) on the vehicle, has different proprietary names across manufacturers. For instance, Volkswagen calls it ESP, Toyota uses VSC, and Honda refers to it as VSA. The function of anti-skid control: When the vehicle becomes extremely unstable (such as during sharp turns or lane changes), it compensates for vehicle stability by applying wheel brakes or controlling engine torque, correcting the instability of the car body to help prevent accidents. The simplest example: When braking hard on icy roads, the vehicle is very prone to skidding, and the anti-skid control system can solve this problem.
16
3
Share

Will there be penalties for not registering a motorcycle's color change?

If a motorcycle's color change is not registered and is discovered, a fine of 200 yuan will be imposed without any deduction of points. According to Article 56 of the "Regulations on the Registration of Motor Vehicles," if the body color is changed without going through the required registration procedures, the traffic management department of the public security organ will issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color. To apply for a change in the body color of a motor vehicle, the following documents must be submitted in accordance with the "Road Traffic Safety Law": "Application Form for Modification of Motor Vehicle Registration." Identity proofs of the motor vehicle owner and the agent. The motor vehicle registration certificate. The motor vehicle license. According to Article 6, Chapter 2 of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, no modification registration is required. Conversely, if it exceeds 30%, it must be registered and filed within 10 days after the color change. Precautions for vehicle color change: Before changing the color of a motor vehicle, it is necessary to consult the vehicle management office where the vehicle is registered to determine whether the local area permits the use of film to change the vehicle color. If the region does not support this method, the modification cannot be registered, and the film must be completely removed to restore the vehicle's original color. Additionally, according to the "Regulations on the Registration of Motor Vehicles," owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply to the vehicle management office for modification registration. According to Article 10, registered motor vehicles must apply for modification registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Whole vehicle replacement due to quality issues. Change of use nature, such as converting a commercial vehicle to a non-commercial vehicle or vice versa. The motor vehicle owner's residence moves out of or into the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with emblem patterns and equipped with alarms and signal lights as required. Other motor vehicles are not allowed to paint, install, or use emblem patterns, alarms, or signal lights that are exclusive to or similar to those of the aforementioned vehicles.
12
4
Share

What color is the X-Trail brake light wire?

X-Trail brake light wire is red. The X-Trail brake light model is T20. Brake lights are generally installed at the rear of the vehicle, with the main body color being red, to enhance the penetration of the light source. This ensures that vehicles behind can easily detect when the vehicle in front is braking, even in low visibility conditions, thereby helping to prevent rear-end collisions. The method for removing and replacing the brake light is as follows: 1. Use a cross-head screwdriver or socket to remove the bolts; 2. Pull the lamp assembly out from the rear pillar; 3. Turn the socket counterclockwise and remove it; 4. Remove the old bulb and insert the new one.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.