What is the fuel tank capacity of the 2020 Geely Emgrand automatic transmission?

1 Answers
DiAlina
07/30/25 8:13am
Geely Emgrand 2020 offers a total of 10 models, all with a fuel tank capacity of 50 liters. The vehicle is equipped with a 1.5L naturally aspirated engine, paired with either a 5-speed manual transmission or a CVT continuously variable transmission. During actual refueling, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling volume may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while nearing F means the tank is nearly full.
Was this review help?
14
0
Share
More Forum Discussions

Is occupying an EV charging spot with a gasoline vehicle considered illegal parking?

Specific policies vary by city, but an increasing number of cities now classify this behavior as illegal parking. Taking Beijing as an example, occupying an EV charging spot with a gasoline vehicle constitutes illegal parking. According to the "Beijing Motor Vehicle Parking Regulations," it is explicitly stated: Non-electric vehicles are prohibited from occupying parking spaces designated exclusively for electric vehicles. Violators will be ordered to rectify the situation by the traffic management department of the public security authority and will be penalized according to the law. The Beijing Municipal Commission of Urban Management and the Municipal Commission of Transport jointly issued the "Implementation Opinions on Strengthening the Construction and Management of Charging Facilities in Parking Lots," requiring existing parking lots to install charging piles for no less than 10% of the parking spaces and to designate at least one parking space exclusively for electric vehicles. It also explicitly states that gasoline vehicles are prohibited from occupying spaces designated for electric vehicles, and traffic police can enforce penalties for such violations. Occupying a new energy vehicle parking spot with a gasoline vehicle is the same as illegal parking—both involve parking in an inappropriate location. Therefore, penalizing gasoline vehicles for occupying new energy parking spaces is a measure to protect the rights and interests of new energy vehicle drivers.
16
1
Share

Is there any damage if driving a distance with a flat tire?

Whether there is damage after driving a distance with a flat tire depends on whether the tire is a run-flat tire. If it is not a run-flat tire, you must not continue driving, otherwise the sidewall of the rim will cause indentations on the tire sidewall, making the tire unusable. When the tire is flat, you should immediately replace it with the spare tire and take the flat tire to a tire shop for repair so it can be used again. If the tire is a run-flat tire, you can still drive a short distance, but the speed should not exceed 50 km/h. The inner sidewall of a run-flat tire is reinforced, allowing it to support the tire for a short distance even when flat. However, to minimize damage to the tire, it is still recommended to repair the tire as soon as possible; otherwise, it may cause further damage. For large vehicles such as trucks and buses, driving with a flat tire is not allowed. Due to the heavier weight of these vehicles compared to cars, continuing to drive with a flat tire is even more dangerous. Not only will it further damage the tire, but it may also cause other tires to exceed their load capacity, leading to traffic accidents. Immediate replacement is necessary.
15
3
Share

Which manufacturers are Mercedes-Benz joint ventures?

Mercedes-Benz has two joint venture manufacturers in China, located in Beijing and Fujian respectively. The Beijing plant produces passenger vehicles, while Fujian Mercedes-Benz produces commercial vehicles. Beijing Benz Automotive Co., Ltd.: Beijing Benz Automotive Co., Ltd. is a joint venture established by Beijing Automotive Group Co., Ltd., Daimler AG, and Daimler Greater China Ltd. It was officially founded on August 8, 2005. The Beijing Benz factory is located in the Beijing Economic-Technological Development Area and has an annual production capacity of 100,000 vehicles. Fujian Benz Automotive Co., Ltd.: Fujian Benz Automotive Co., Ltd. was established in June 2007 and is located in the Qingkou Investment Zone, Minhou County, Fuzhou City, Fujian Province. Fujian Mercedes-Benz: Fujian Mercedes-Benz is Daimler's southern project in China and serves as an important production base for Daimler's global strategy. The models produced include the V-Class, Vito, and Sprinter. Modified Mercedes-Benz vehicles include the Vito ambulance, Vito police vehicle, Vito business travel vehicle, Sprinter ambulance, Sprinter emergency communication command vehicle, and Sprinter police vehicle, among others.
11
0
Share

Is the Accelerator Pedal Not Used in Subject Two?

Subject Two examination does not require the use of the accelerator pedal. Subject Two is a closed-course driving test where the entire test can be completed in first gear without needing to press the accelerator. During the Subject Two test, examinees have limited driving skills and lack adaptability in operating within the restricted course. Excessive speed can easily lead to crossing lines or even collisions. To facilitate novice drivers in controlling the vehicle speed, the test vehicle's idle speed is set relatively higher. Engaging first gear or reverse gear without applying throttle is sufficient to complete all test items. In many places, to prevent examinees from mistakenly pressing the accelerator, the accelerator pedal is temporarily sealed or even removed. Additional Information: The principle of "Steady, Accurate, and Firm" in clutch control: Firm: When depressing the clutch pedal, press it firmly all the way down to engage the gear. Accurate: Learn to accurately find the semi-engagement point by sensing the "body vibration." Steady: Lift the clutch pedal slowly and steadily without rushing. More practice with the clutch is essential for examinees to gain confidence and truly familiarize themselves with clutch operation. The "Golden Three Principles" of reference points: Learning to correctly identify reference points is crucial in Subject Two. Whether it's reverse parking, parallel parking, curve driving, right-angle turns, or hill starts, each requires concentrated attention on reference points. Typically, instructors teach how to identify reference points during initial training sessions. However, it is important for learners to independently find suitable reference points for observation.
13
2
Share

How many kilometers can a Civic drive after the oil change reminder?

Civic can drive about 800 kilometers after the oil change reminder, because the factory reminder is based on a fixed maintenance cycle, which will remind once when the vehicle reaches 5,000 kilometers, and each time it will remind 800 kilometers in advance, so there will be a longer driving range of 800 kilometers. However, it is also recommended to service the vehicle as soon as possible. The body dimensions of the Civic are 4649mm in length, 1800mm in width, and 1416mm in height. Honda Civic has launched multiple models to cater to the tastes of consumers in different countries, including three-door hatchback, hardtop coupe, hybrid version, and five-door sedan version.
3
0
Share

What are the reasons for the illumination of the car's stability control system light?

The reasons for the illumination of the car's stability control system light are: 1. Misoperation by the owner; 2. Malfunction of the electronic stability control system; 3. Damage to the car's wheel speed sensor. The stability control system includes: 1. Electronic brake force distribution system; 2. Anti-lock braking system; 3. Traction control system; 4. Vehicle dynamic control system. The working principle of the stability control system is: judging the driving state based on sensor signals and performing well-controlled calculations through the control unit, which individually controls each wheel when rotation, understeer, or oversteer occurs to improve vehicle stability.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.