What is the fuel tank capacity of the 2019 Audi A4L in liters?

1 Answers
LaSimon
07/30/25 4:27am
2019 Audi A4L has a fuel tank capacity of 56L, while the 45TFSI quattro version has a capacity of 58L. This data is official. Owners of the 2019 Audi A4L can also check this information in the vehicle's configuration sheet. The 2019 Audi A4L is equipped with two different displacement engines. Models with the 1.4TL turbocharged engine use 95-octane fuel, with an NEDC combined fuel consumption of 5.8L per 100km, allowing a range of 965km on a full tank. Models with the 2.0T turbocharged engine also use 95-octane fuel, with an NEDC combined fuel consumption of 6.2L per 100km, allowing a range of 903km on a full tank. The 45TFSI quattro National V model has an NEDC combined fuel consumption of 6.9L per 100km, allowing a range of 840km on a full tank. The 45TFSI quattro National VI model has an NEDC combined fuel consumption of 7.2L per 100km, allowing a range of 805km on a full tank. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing. If the tank is filled to the opening during refueling, the actual amount of fuel added may exceed the marked capacity. Other factors affecting vehicle fuel consumption include: Vehicle weight: There is a direct correlation between vehicle weight and fuel consumption. A 10% reduction in weight can lead to a corresponding reduction in fuel consumption. Vehicle aerodynamics: A lower drag coefficient results in noticeably lower fuel consumption. A higher drag coefficient increases fuel consumption proportionally. Low tire pressure: This increases tire friction and adhesion, leading to higher fuel consumption. Driving habits: Rapid acceleration and frequent braking can significantly increase fuel consumption. Wind direction: Driving with a tailwind reduces fuel consumption, while driving against a headwind increases engine workload and fuel consumption. Road conditions: Driving on flat roads consumes less fuel compared to uneven or steep roads. Use of additional electronic devices: Using devices like air conditioning while driving increases fuel consumption.
Was this review help?
19
4
Share
More Forum Discussions

What are the criteria for a full-size SUV?

Full-size SUVs, also known as large SUVs, are the largest category of SUVs. Their main characteristics include large size, high displacement, and spacious interiors, with body lengths typically approaching or exceeding 5,000 millimeters. Key features of full-size SUVs include high torque and low power: performance is enhanced by directly increasing displacement, with less emphasis on fuel economy. Full-size SUVs offer ample space, accommodating between 5 to 8 seats. Representative models of full-size SUVs include the Infiniti QX56, Mercedes-Benz GL450, and Cadillac Escalade. Spaciousness: Full-size SUVs prioritize size and spaciousness in all aspects of their design, often sacrificing factors such as fuel efficiency, cost, and even styling. However, in reality, automobiles are comprehensive products, so full-size SUVs not only dominate in size but also set benchmarks in performance and features across various aspects.
8
5
Share

What Causes Vehicle Vibration During Driving?

Reasons for car vibration during driving are as follows: Dirty air filter: The air filter is designed to protect the engine and reduce wear, usually requiring replacement around 10,000 kilometers. If not replaced in time, it can cause insufficient air intake, leading to low idle speed and engine vibration. Simply replacing the filter element can resolve this issue. High-voltage wire breakage: A high-voltage wire breakage refers to the breakage of the wire core inside the high-voltage wire, which can affect ignition and cause engine vibration. Use a multimeter to measure the resistance and replace the one with significantly higher resistance. Spark plug lifespan: Spark plugs have a limited lifespan. After exceeding 30,000 to 40,000 kilometers, their ignition efficiency noticeably decreases, which can affect ignition. This is the most common issue, and replacing all spark plugs can solve the problem.
19
1
Share

What are the effects of leaving the car window open and getting rained on all night?

Leaving the car window open and getting rained on all night can have negative effects on the vehicle. If the wiring gets wet, the window may not be able to move up and down freely, and it will require inspection and repair to restore normal function. Below are some methods to deal with the aftermath of the car window being rained on: Remove, clean, and dry: If rainwater has seeped into the seats, carpets, or floor mats, they should be removed, cleaned, and dried thoroughly. If you notice any abnormalities with the car lights or other functions while driving, it is advisable to have them inspected promptly. Visit a repair shop: It is best to avoid using any electronic devices inside the car to prevent short circuits. Although most electronic components in cars are waterproofed, some may still get wet and cause short circuits. Therefore, after ensuring all moisture is absorbed, test the car's electronic devices. If any malfunction is detected, take the car to a repair shop for inspection.
14
1
Share

Why is the transmission warning light on?

Transmission warning light may be on due to issues such as automatic transmission fluid, inability to increase speed caused by one-way clutch slippage, or failure to engage caused by jamming. Below is more related information: Automotive Transmission: Definition: An automotive transmission is a set of gear mechanisms used to coordinate the engine's speed with the actual driving speed of the wheels, aiming to achieve the engine's optimal performance. The transmission can produce different gear ratios between the engine and the wheels during vehicle operation. By shifting gears, the engine can operate within its optimal power performance range. The trend in transmission development is toward increasing complexity and higher levels of automation, with automatic transmissions becoming the mainstream in the future. Transmission Characteristics: The engine's output speed is very high, with maximum power and maximum torque occurring within a certain speed range. To leverage the engine's best performance, a transmission system is necessary to coordinate the engine's speed with the actual driving speed of the wheels.
1
0
Share

How to Deal with Ice on the Car's Windshield?

Methods to handle ice on the car's windshield: 1. Use a warm towel to gently wipe the windshield. If the ice is not too thick, a warm towel can usually melt it; 2. If the ice on the windshield is quite thick, it is recommended to start the vehicle while using warm water to melt the ice and turn on the car's heater. When the interior temperature rises, the ice on the windshield will melt automatically. It is important to note that if ice forms on the windshield, never use hot water to melt it. Although hot water melts ice much faster than warm water, using hot water is very dangerous as it can easily cause the windshield to crack due to the excessive temperature difference between the hot water and the ice.
8
0
Share

What are the safety features of the Envision?

The safety features of the Envision include: driver and front passenger airbags, front side airbags, front and rear head airbags, seat belt reminder, rear child seat interface, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, and electronic stability control. The Envision measures 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm. It is equipped with two engine options: a 1.5T and a 2.0T. The transmission options include a 9-speed automatic transmission and a 7-speed dual-clutch transmission. The 1.5T engine delivers a maximum output power of 124 kW and a maximum torque of 250 Nm, while the 2.0T engine produces a maximum output power of 191 kW and a maximum torque of 400 Nm.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.