What is the fuel tank capacity of the 2018 Sagitar?

1 Answers
VanPiper
07/29/25 7:20pm
2018 Sagitar has a fuel tank capacity of 50 liters. The vehicle is equipped with a 1.2T 110 horsepower L4 engine, and all models come with a 7-speed dry dual-clutch transmission (MT). All models feature front-wheel drive. All Sagitar models have a fuel tank capacity of 50 liters. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is near E, it indicates low fuel, and when it is close to F, it means the fuel level is sufficient.
Was this review help?
13
0
Share
More Forum Discussions

What was the last month in 2014 for the final batch of China III vehicles?

China III vehicles were last produced in October 2014. Pre-departure vehicle inspection: Before setting off each day, conduct a comprehensive check of the vehicle, including checking for oil or water leaks; measure tire pressure to ensure it's appropriate; inspect the engine oil condition; verify the spare tire is intact, etc. Caution when wading: If encountering waterlogged roads, assess the water depth and road conditions underneath before determining if it exceeds the vehicle's capability. Avoid attempting to wade if the water depth exceeds half the height of the car's tires. Observe traffic rules: Avoid racing with other vehicles, drive safely in compliance with traffic regulations, and yield to pedestrians. Maintain a safe distance when following another vehicle, staying at the right rear corner of the vehicle ahead; when overtaking, pass from the left side of the vehicle in front, avoiding overtaking from the right or between two parallel vehicles.
14
3
Share

How to Adjust the Tightness of Hydraulic Disc Brakes?

Hydraulic disc brake tightness can be adjusted using the following methods: 1. There is a red plastic disc near the spoke side. Rotating this plastic disc adjusts the tightness. 2. Use the screw on the brake caliper to adjust the clearance width. 3. It is recommended that car owners visit a 4S shop or repair shop for adjustment. The main advantages of hydraulic disc brakes are as follows: 1. They provide rapid braking at high speeds, have better heat dissipation than drum brakes, maintain consistent braking performance, and are easier to install with advanced electronic devices like ABS. 2. They use metal pads instead of drum wheels, with flat brake shoes on both sides of the brake disc. When hydraulic pressure from the master cylinder is sent to the wheel cylinder, the brake shoes clamp onto the brake disc to achieve the braking effect.
10
3
Share

How to Replace the Key Battery for a Civic?

The method to replace the Civic key battery is as follows: 1. Remove the mechanical key. 2. Carefully pry open the edge with a coin to detach the upper half and open the car key cover. 3. Lift the car key cover to reveal the battery inside. 4. Take out the old battery and insert the new one. 5. Close the car key cover to complete the battery replacement. Below is more information about the Honda Civic: 1. Honda Civic offers multiple models to cater to the tastes of consumers in different countries, including three-door hatchback, hardtop coupe, hybrid version, and five-door sedan. 2. The new Civic is the domestic version of Honda's tenth-generation Civic model. It features a more youthful and sporty design and is powered by 1.5T and 1.0T engines, with the 1.5T model being launched first, equipped with a 6-speed manual or CVT transmission.
18
2
Share

What are the symptoms indicating the need for brake fluid replacement?

The symptoms indicating the need for brake fluid replacement are: 1. The brake warning light illuminates or flashes during emergency braking or continuous braking; 2. The braking distance becomes significantly longer than before during emergency braking; 3. The brake pedal feels soft or weak when pressed; 4. The braking force feels inconsistent, sometimes light and sometimes heavy during braking. The steps for brake fluid replacement are: 1. Park the vehicle on a level surface, turn off the engine, open the hood, and drain the fluid from the reservoir; 2. Use a funnel to fill the reservoir with new brake fluid; 3. Use a jack to lift the vehicle and start removing the tires from the rear wheels; 4. Remove the rubber dust cap on the brake caliper; 5. Use a wrench to loosen the bleeder screw, attach a rubber tube to it, and connect it to a drain bottle; 6. Press the brake pedal inside the vehicle while observing the fluid drainage until the fluid level in the reservoir under the hood reaches the lower limit; 7. Start the vehicle and perform a brake test in a relatively safe area.
5
1
Share

What does 2.0T mean for a car?

2.0 refers to the engine displacement, and 2.0T indicates a displacement of 2.0 liters with turbocharging function. Extended information: 1. Displacement refers to the ability of an engine to deliver all air and fuel mixture to all cylinders during one complete cycle, and it also refers to the volume that a piston can displace when moving from one stroke to another. The compressor's displacement is the volume of gas discharged by the final stage of the compressor within a unit time, converted to the pressure and temperature conditions at the first stage inlet. 2. L stands for liter, and T stands for ton. L is the abbreviation of liter. It is the unit of volume liter, referring to the engine displacement of a car. For example, 1.5L means the engine has a displacement of 1.5 liters. T is the abbreviation of Turbo. It refers to an engine equipped with a turbocharging device. For example, 1.5T means a 1.5-liter displacement engine is equipped with a turbocharging device.
12
3
Share

How to Turn Off the Headlights of Audi A6?

In the central control system, select the 'car' button to enter the car lighting settings option, and then turn off the daytime running lights. Actually, there's no need to turn off the daytime running lights as they serve as signal lights, designed to provide identification signals to other traffic participants to avoid accidents. Here is some related information about the Audi A6: 1. While enjoying long drives, a relaxed and comfortable driving atmosphere is essential. The standard interior of the new Audi A6L already meets this requirement perfectly. Additionally, it offers more upscale interior options with Silhouette fabric, Milano leather, and Valcona leather, complemented by decorations made of glazed black plastic, aluminum alloy, birch wood, and brown walnut wood. 2. Enhanced by high-quality interior materials, the modern lighting design ensures that the new Audi A6L creates an even more satisfying in-car environment. The use of fiber optic and LED lighting technologies, along with ambient lighting for door handles, storage compartments, and welcome pedals, creates a more comfortable atmosphere and a sense of more spaciousness.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.