What is the fuel tank capacity of the 2018 Geely New Vision?

2 Answers
ORemington
09/02/25 4:01am
The fuel tank capacity of the 2018 Geely New Vision is 50 liters. Below are the methods for handling fuel tank damage and precautions for fuel tank usage: Methods for handling fuel tank damage: If a fuel leak is detected, clean the leaking area and apply soap or chewing gum to temporarily seal the leak. For better results, use epoxy resin adhesive for repair. Precautions for fuel tank usage: The fuel tank must have sufficient capacity. On one hand, it should meet heat dissipation requirements, and on the other hand, it should be able to contain all the working fluid in the system when the hydraulic system is not in operation, while maintaining an appropriate fluid level during operation.
Was this review help?
10
0
Share
LeAlexa
09/14/25 6:16am
I've been driving the 2018 Geely New Vision for several years, and its 50-liter fuel tank capacity is very convenient for daily use. For city commuting, a full tank allows me to drive about 500 to 600 kilometers, with an average fuel consumption of around 7L/100km. I only need to refuel once a week, saving a lot of time and effort. I remember one long-distance trip from Beijing to Tianjin and back without needing to refuel midway, which saved me the hassle of frequent stops. Usually, I take advantage of gas station promotions to fill up, like topping up more when fuel prices are low to save extra money. I also pay attention to fuel quality, choosing reputable gas stations to avoid impurity buildup. Regularly checking the fuel tank cap and seals is crucial too, as leaks can increase maintenance costs. Overall, this large fuel tank design is quite practical and well-suited for daily commuters like me.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

Where is the transmission fluid filler port located on the Chevrolet Cruze?

The manual transmission fluid filler port on the Cruze is located at the front of the transmission, sealed with a hex screw. Fill the transmission fluid until it starts overflowing from the port, which can be accessed by looking downward from the engine compartment. Here is more information about transmission fluid: 1. Types of transmission fluid: Transmission fluid is categorized into two types based on transmission type: manual transmission fluid and automatic transmission fluid. 2. Functions of transmission fluid: (1) The interaction between gears generates significant heat, requiring lubrication for cooling. (2) Ensures smoother gear engagement. (3) Maintains cleanliness of the gear system and prolongs the lifespan of transmission components.
7
0
Share

Is Engine Electronic Anti-Theft Useful?

Engine electronic anti-theft is a set of anti-theft system installed for the engine, commonly referred to as the engine immobilizer system. For cars equipped with an engine immobilizer system, even if a thief can open the car door, they cannot drive the car away. Additional information: 1. Engine immobilizer system: The engine immobilizer system was developed on the basis of General Motors' VATS and inherits the VATS concept in terms of anti-theft principles. It controls the engine start by matching the password in the key chip with the password in the ignition switch to achieve anti-theft purposes. 2. Function of the immobilizer: This feature plays a significant role in vehicle anti-theft. For vehicles without an engine immobilizer, thieves can start the car and drive away by wiring directly after breaking into the car. For vehicles with an immobilizer, even if thieves enter the car and wire correctly, they cannot start the car, or if started, the engine will shut down immediately because the engine power module will not supply power, fuel, or ignition (high-end cars may directly lock the transmission) without receiving the key signal. Vehicles with an immobilizer are more secure.
20
3
Share

What is the suitable tire pressure for the Elantra?

The normal tire pressure range for the Hyundai Elantra is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. The data from the Elantra's tire pressure monitoring system will be displayed on the central screen of the instrument panel. The driving tire pressure monitoring will only be displayed a few minutes after driving. When the vehicle is stationary, selecting the tire pressure monitoring interface via the steering wheel button will display "Drive to Display." When the inflation pressure of one or more tires is significantly insufficient, the low-pressure tire position indicator will illuminate the corresponding position indicator to show which tire has significantly low pressure. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system typically alerts when the pressure is below 1.8bar or above 3.0bar. In this case, a tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged while driving, it will also trigger the tire pressure warning light. For sensor damage issues, the only solution is to replace it with a new component.
5
5
Share

What Are the Reasons for Abnormal Noises When the Car Air Conditioner Is Turned On?

Abnormal noises from the air conditioner may be caused by the following reasons: 1. Abnormal noises inside the control panel: This is usually due to the expansion of the refrigerant, which may contain water or air. In this case, simply replacing the refrigerant can solve the problem. Another reason could be overcharging of the refrigerant, which can also cause abnormal noises. Releasing some refrigerant appropriately can resolve the issue. 2. Compressor abnormal noises: This is generally due to a compressor malfunction, which can have various causes, such as worn-out compressor bearings or internal plungers that need replacement, insufficient belt tension, or belt slippage, all of which can lead to abnormal noises. 3. Blower abnormal noises: For example, foreign objects inside the blower, lack of lubrication, or severe wear of the blower itself can cause abnormal noises. 4. Electromagnetic clutch: Since the electromagnetic clutch is close to the ground, it is prone to dirt ingress, which may cause bearing issues and result in abnormal noises. 5. Air filter element: If not replaced for a long time, foreign objects may accumulate in the air ducts, leading to abnormal noises. 6. If the noise reappears after a repair and is concentrated inside the control panel, it may indicate reduced efficiency of the dryer bottle. In most cases, this points to an issue with the air conditioner's compressor. The specific situation should be analyzed based on different causes, so it is recommended to visit a 4S shop for an inspection first to identify the problem before proceeding with repairs.
10
2
Share

What is the maximum grace period for vehicle inspection?

Annual inspection for passenger cars cannot be postponed. It should be processed within 3 months before the expiration date of the annual inspection. Vehicles that have not passed the annual inspection on time are not allowed to be driven on the road. Below is relevant information about vehicle annual inspection: 1. Vehicle inspection periods: (1) Operational passenger vehicles must be inspected once a year within 5 years; if exceeding 5 years, every 6 months; (2) Trucks and large or medium-sized non-operational passenger vehicles must be inspected once a year within 10 years; if exceeding 10 years, every 6 months; (3) Small and mini non-operational passenger vehicles must be inspected once every 2 years within 6 years; if exceeding 6 years, once a year; if exceeding 15 years, every 6 months. 2. Meaning of vehicle inspection: It refers to a mandatory test for every vehicle, equivalent to a physical examination for the vehicle, to promptly eliminate potential safety hazards and reduce the occurrence of traffic accidents, commonly known as vehicle inspection.
11
1
Share

How long after failing Subject 2 can you schedule a retest?

After failing Subject 2, you cannot directly schedule a retest. The applicant must first pay the retest fee at the vehicle management office and wait for 10 days before taking the test again. Below is an introduction to the driving test scheduling rules: 1. Each subject allows one examination with one retest opportunity if failed; 2. If the applicant skips the retest or fails it again, the current test session ends, and the applicant must reschedule. However, Subject 2 and Subject 3 road tests can only be scheduled after 10 days; 3. Within the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 road skill tests must not exceed five. If the fifth attempt still results in failure, all previously passed subjects will be invalidated.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.