What is the fuel tank capacity of the 2017 Volkswagen Lavida?

1 Answers
DelCameron
07/30/25 10:11am
The fuel tank capacity of the 2017 Lavida is 55 liters. The 2017 Lavida is a compact car launched by SAIC Volkswagen, with dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, and a wheelbase of 2688mm. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 83kW and a maximum torque of 145Nm, paired with either a 5-speed manual or a 6-speed automatic transmission. For the 2019 model, apart from the 51-liter variant, there are several models with a 52.8-liter fuel tank. The 2021 Lavida has a 51-liter fuel tank, and the 2022 Lavida also features a 51-liter fuel tank. If owners want to check the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with 'E' and 'F'. When the needle approaches 'E', it indicates low fuel, while nearing 'F' means the fuel level is sufficient. Maintenance tips for the fuel tank are as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leakage at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, ensure the vent holes are clear and unobstructed. The filter screen at the fuel filler inlet should remain intact to prevent impurities from entering the tank during refueling, which could clog the fuel lines. The sealing gasket on the fuel filler cap should also be in good condition to prevent fuel spillage while driving.
Was this review help?
5
2
Share
More Forum Discussions

What is the ground clearance of the Audi Q3?

The ground clearance of the Audi Q3 is 152mm. The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting plane when the car is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. The Audi Q3 is positioned as a compact SUV, with body dimensions of 4484mm in length, 1856mm in width, and 1616mm in height, and a wheelbase of 2680mm. In terms of configuration, the Audi Q3 is equipped with an electric panoramic sunroof, a four-way adjustable multifunction steering wheel, a rearview camera, a keyless start system, seat height adjustment, a voice control system, dual-zone automatic air conditioning, rear air vents, and more. It also features multiple configurations that enhance driving convenience, such as an automatic parking system, a keyless entry system, lumbar support adjustment, and front and rear parking sensors.
5
3
Share

Is the KAROQ equipped with a dry dual-clutch transmission?

The KAROQ indeed uses a dry dual-clutch transmission. Here are the relevant details: 1. The structural design of the KAROQ's dry dual-clutch differs from that of a traditional AT transmission. If driving in congested road conditions, the dry dual-clutch will frequently engage in starting, shifting, and switching gears, causing the clutch to generate heat from constant friction, potentially leading to overheating. This can trigger transmission warnings and increase the likelihood of malfunctions. 2. Additionally, the maximum torque capacity of a dry dual-clutch is generally lower than that of other types of clutches, making it more prone to slipping. This is one of the reasons why this transmission is not particularly popular in China.
9
5
Share

What does the wrench symbol on the dashboard mean?

The appearance of a wrench symbol on the dashboard refers to the maintenance indicator light, which does not indicate a vehicle malfunction but rather reminds the owner that the vehicle requires maintenance. This is a very user-friendly design. More relevant information is as follows: 1. The wrench symbol generally appears during the self-check each time the car is started. The purpose of the maintenance indicator light is to remind the owner to perform maintenance after the vehicle has been driven for a certain mileage. It should be noted that different vehicle models have different preset maintenance intervals, so please refer to the vehicle's user manual for specific details. 2. After maintenance is completed, the technician will reset the maintenance light to zero through a setting procedure. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
2
3
Share

How to Determine if a Car Engine Has Cylinder Scoring?

When cylinder scoring occurs, the car will experience jerking motions and the engine will produce significant abnormal noises, with reduced RPM and noticeably decreased power. Cylinder scoring is caused by severe surface damage due to the mutual movement between the piston and cylinder, primarily resulting from localized failure of the lubricating oil film in the moving parts. The cooling efficiency of the engine's cooling system, the quantity and quality of engine oil, and the performance of the supply system are all critical factors that can lead to fatal engine damage. The causes of cylinder scoring are as follows: 1. The clearance between the piston and cylinder is too small; 2. Insufficient lubrication between the piston and cylinder or incorrect oil selection; 3. Failure of the engine cooling system; 4. Low hardness or poor quality of the cylinder itself.
3
5
Share

Why is overtaking on the right side not allowed?

Reasons for not allowing overtaking on the right side are as follows: 1. In China, vehicles are left-hand drive and drive on the right side of the road. When overtaking from the left, the driver has better visibility from the driver's seat. Overtaking from the right creates a larger blind spot, requiring the vehicle to move entirely into the right lane to fully assess the safety of that lane, which increases the risk of accidents. 2. The left lane is generally the fast lane, while the right lane is the slow lane. Overtaking typically involves acceleration, and overtaking from the right is more likely to be obstructed by slower-moving vehicles, increasing the likelihood of accidents. Overtaking from the left aligns with normal driving patterns. The correct method for overtaking is as follows: 1. Check the left rearview mirror, signal left, and after confirming it is safe, accelerate into the left lane. 2. Pass the vehicle in front, then merge back into the right lane to complete the overtaking process.
15
0
Share

How to change the transmission oil for Audi A5?

Audi A5 transmission oil replacement method is as follows: First, lift the car, remove the drain plug to let the oil in the transmission flow out, then remove the oil pan, replace the transmission oil filter, clean the magnet and oil pan and other components, then connect the circulation oil change machine, fill the original transmission oil into the circulation machine, and the new and old oil in the transmission will start to circulate and replace automatically. Extension: The Audi A5 will adopt a new family-style design language, with the overall body shape not changing much compared to the current model, mainly upgrading the front face and taillight groups. The front face adopts a more aggressive large-mouth grille, and it also comes with newly designed front and rear light groups, with the front and rear bumpers redesigned, making the overall shape more sporty.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.