What is the fuel tank capacity of the 2017 MG ZS in liters?

2 Answers
OIsabela
09/08/25 2:53am
2017 MG ZS has a fuel tank capacity of 45 liters, and the gasoline specification is 92 octane or higher unleaded gasoline. The MG ZS is a compact SUV under SAIC Motor. The 2020 MG ZS also has a fuel tank capacity of 45 liters, with the same gasoline specification of 92 octane or higher unleaded gasoline. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it indicates sufficient fuel. The maintenance of the fuel tank is as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leakage at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, also check if the vent holes are clear. The filter screen at the fuel filler inlet should be kept intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket of the fuel filler cap should also be intact to prevent fuel from spilling out while driving.
Was this review help?
11
2
Share
DeMorgan
09/19/25 8:30am
As a young car owner, I recently purchased a 2017 MG ZS, which has a fuel tank capacity of around 45 liters. This size is very practical for me. During my daily commute, a full tank can last approximately 600 to 700 kilometers, as my average fuel consumption is about 6 liters per 100 kilometers. This means I don’t have to visit the gas station frequently—filling up once a week is sufficient. While commuting, I also enjoy keeping a fuel consumption log to remind myself of fuel-saving techniques, such as avoiding sudden acceleration and maintaining proper tire pressure. The 45-liter capacity is standard for vehicles in its class, designed quite reasonably—neither too large to affect the car’s weight nor too small to increase refueling frequency. Overall, it makes my life more convenient and reduces the hassle of unexpected fuel shortages.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What Causes Jerking Sensation After Refueling a Car?

Jerking sensation after refueling is caused by substandard fuel quality, incomplete combustion, or faults in components like spark plugs and ignition coils, leading to cylinder misfires. It's important to promptly visit a repair shop for diagnosis. Reason for filling up the tank during first refueling: During the first refueling, always fill until the pump nozzle "clicks off." Once the nozzle clicks, do not add more fuel. This practice is to verify the accuracy of the new car's fuel gauge. Reason for not filling the tank completely after the first refueling: Overfilling leaves no space in the upper part of the fuel tank. Especially in summer, gasoline vapors have nowhere to escape, which can cause fuel sputtering. It also submerges the tank's vent outlet in gasoline, forcing liquid fuel into the carbon canister and causing damage to it.
11
2
Share

What is the open position of the manual choke on a motorcycle carburetor?

Motorcycle chokes have two positions: up and down. The upper position is the closed state of the choke, and the lower position is the open state of the choke. Choke Introduction: The choke is a unique device in carburetor-type gasoline engines, used to adjust the mixture concentration for easier starting. Under normal circumstances, it should be kept in the open position. The choke, also known as the air choke, is used to regulate the amount of air entering the engine. Choke Starting Precautions: When starting a cold engine and needing a rich mixture, close the choke (i.e., pull the choke). After the engine warms up, push it back. The carburetor then provides a lean mixture to the engine, which meets combustion needs while saving gasoline. Therefore, don't hesitate to use the choke for starting, as this method maximizes fuel efficiency.
11
1
Share

What is the reason why the gasoline sprayer keeps shutting down automatically?

The reason why the gasoline sprayer keeps shutting down automatically is due to blocked fuel passages, poor heat dissipation, or issues with the ignition system. Overview: Automotive gasoline is a liquid fuel refined from petroleum, primarily used for cars and motorcycles. Classification: In China, automotive gasoline is divided into unleaded and leaded categories. Unleaded gasoline comes in three octane ratings: 90, 93, and 95 RON (Research Octane Number). Leaded gasoline also has three octane ratings: 90, 93, and 97 RON. Among these, the lead content in 90-octane gasoline does not exceed 0.35g/L, while the lead content in 93 and 97-octane gasoline does not exceed 0.45g/L.
4
2
Share

What causes the front-end noise when driving a Mercedes W211?

There are several reasons for the front-end noise when driving a Mercedes W211: Uneven engine cooling: After driving for a while, the engine temperature becomes very high. When the engine is turned off, the temperature of various components decreases, and thermal expansion and contraction cannot occur uniformly. This inevitably leads to gaps between internal metal parts due to cooling contraction, resulting in friction and noise. Exhaust pipe cooling noise: Typically, the exhaust pipe temperature is around 200 degrees Celsius during cold idle. When the car is under high load or there is combustion of mixed gases in the exhaust pipe, the temperature can be even higher, causing the exhaust pipe to expand and contract thermally, producing noise. Catalytic converter cooling noise: The normal operating temperature of the catalytic converter is between 400-800 degrees Celsius. After the engine is turned off, its operation gradually stops, and the temperature decreases, causing thermal expansion and contraction of its internal metal components, which then produces noise.
16
2
Share

Why is there a P gear when there is an electronic handbrake?

The difference between electronic handbrake and P gear: 1. Different functions: The P gear is designed to lock the axle when the car is stationary on a slope. The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both of which use the friction generated between the brake disc and the brake pad to achieve parking braking, except that the control method has changed from the previous mechanical handbrake lever to an electronic button. 2. Different working principles: The electronic parking brake system integrates the temporary braking function during driving and the long-term braking function after parking, and realizes parking braking through electronic control. The P gear is a gear evolved from the N gear. In addition to putting the transmission in neutral mode, it also has a pawl inside the gearbox to lock the gear on the output shaft to form a mechanical lock, thereby locking the drive axle to fix the vehicle in a stationary or slightly moving state.
17
4
Share

What Causes a Car to Roll on Flat Ground?

The main reason for a car rolling on flat ground is releasing the brake too early before the clutch is fully engaged, resulting in insufficient power when the brake is released. The specific causes and solutions are as follows: Specific Causes: First, for automatic transmission vehicles, if the car is parked in N (Neutral) gear on flat ground, it may roll, especially when parked on a slope. The N gear is equivalent to the neutral position in manual transmission vehicles. For temporary parking, always remember to engage the parking brake; otherwise, the car may roll. After parking, shift to P (Park) gear and then engage the parking brake to prevent rolling. Solutions to Prevent Rolling: When starting the car, the general procedure is to press the brake with the right foot. After pressing the brake, slowly lift the clutch with the left foot. If the torque transmitted from the engine to the tires gradually increases, and the clutch is fully released, the car will not roll. Then, after reaching the semi-engagement point, the engine begins to deliver torque to the tires, and the car can start smoothly as the clutch is gradually lifted.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.