What is the fuel tank capacity of the 2017 Corolla in liters?

1 Answers
ElizaMarie
07/30/25 5:22am
The fuel tank capacity of the 2017 Corolla is 55 liters, and it requires unleaded gasoline with an octane rating of 92 or higher. The size of the fuel tank is directly related to the vehicle's driving range. Most automakers follow a general rule that a full tank of fuel should support a driving distance of approximately 600 kilometers, and not less than 500 kilometers. The actual fuel tank capacity is larger than the nominal capacity. According to fuel safety regulations, the nominal capacity of a vehicle's fuel tank is set at 95% of the rated capacity by national standards. Therefore, when filling up, you can add up to 10% more fuel than the nominal capacity. To check the fuel tank capacity of the Corolla, you can usually observe the reading on the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately displayed on the gauge. The fuel gauge typically has 5-6 segments, with each segment representing the remaining fuel capacity in the tank. It is generally recommended to refuel when the fuel gauge shows only two segments remaining to avoid running out of gas while driving.
Was this review help?
13
4
Share
More Forum Discussions

Which Year's Cars Are China III Standard?

The China III standard was officially implemented starting from July 1, 2008, and was fully enforced from July 1, 2011. Therefore, vehicles manufactured between 2008 and 2011 are classified as China III standard. Here are the specific details: 1. China III is the abbreviation for the National Phase III Emission Standard, equivalent to the European Euro III emission standard. This means the content of tailpipe pollutants is comparable to Euro III levels, with the key difference being that new vehicles must be equipped with an OBD (On-Board Diagnostics) system. 2. The On-Board Diagnostics system features an increased number of detection points and enhanced monitoring systems, including oxygen sensors at both the inlet and outlet of the three-way catalytic converter. It ensures compliance by continuously monitoring vehicle emissions in real-time, thereby guaranteeing stricter enforcement of the Euro III emission standards.
6
3
Share

Can You Continue Driving When the ESP Light Is On?

ESP system malfunction light is on, you should not continue driving, for the following reasons: 1. "EPS" stands for "Electric Power Steering," a power steering system that relies on the motor to provide auxiliary torque. The role of the electric power steering system is to assist the driver in steering operations. Based on the steering torque signal from the steering wheel and the vehicle speed signal, the electronic control unit controls the motor to generate an appropriate magnitude and direction of auxiliary force. 2. If the ESP system malfunctions, it is recommended to check and repair it immediately. This system plays a very important role in the driving stability and safety of the car. If the ESP system malfunction light is on, it is not advisable to continue driving, as doing so may pose certain safety hazards.
10
0
Share

How to Set Up Automatic Tilt-Down for Car Rearview Mirror When Reversing?

The method to set up automatic tilt-down for the rearview mirror when reversing is as follows: 1. Power on the car without starting the engine, set the memory seats to positions 1, 2, or 3, and select the seat position; 2. Press the rearview mirror adjustment selection button, step on the brake, shift to R gear, and the rearview mirror will automatically tilt down to the factory preset position; 3. Use the 4-way adjustment button to adjust to the desired position; 4. Long-press the seat memory button, select the memory position, step on the brake, and shift to P gear; 5. Press the rearview mirror adjustment selection button again to complete the setup. Automatic tilt-down for the rearview mirror when reversing means that when the vehicle is shifted into R gear, the right rearview mirror can automatically adjust its angle downward to help the driver see the ground conditions.
17
5
Share

How long after drinking can you drive?

Here are the guidelines for driving after drinking: 1. You can drive 24 hours after drinking, as it takes a full day for alcohol to be completely eliminated from your system. 2. Even after consuming just one small glass of beer, you should wait 24 hours until there is no residual alcohol in your body and your physical condition is completely normal before driving. 3. Individual reactions vary; even small amounts of alcohol can cause accidents. 4. Never drive under the influence of alcohol. The law states that if you plan to drive, you must not drink. Regardless of whether you feel drunk or not, you must not drive after drinking.
3
5
Share

What Does the Triangle with an Exclamation Mark on the Car Dashboard Mean?

A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common warning symbol in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission issue or low transmission fluid. Transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid. Immediate inspection of the brake system is required to prevent accidents. Tire Pressure Anomaly: A bracket with a horizontal line and an exclamation mark in the middle denotes a tire pressure monitoring warning light, which illuminates when tire pressure is too low. Check and restore tire pressure to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is a lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
12
5
Share

Reasons for the Appearance of an Exclamation Mark Inside a Circle Symbol on the Car Dashboard

This symbol is the brake system malfunction indicator light. The illumination of the brake system warning light is usually caused by the following two reasons: 1. The handbrake is not released or not fully released—check the handbrake; the brake fluid level is insufficient—check the brake fluid reservoir level. 2. Brake fluid plays a crucial role in the car's braking system. If the brake fluid is insufficient, it may affect braking performance and driving safety. The vehicle should be sent to a repair shop as soon as possible for maintenance. 3. If the brake system exhibits abnormalities, such as poor or failed braking, unilateral braking deviation, braking noise, brake drum overheating caused by brake drag, or parking brake failure.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.