What is the fuel tank capacity of the 2017 Buick Verano?

1 Answers
DiAlejandro
07/30/25 8:21am
The fuel tank capacity of the 2017 Buick Verano is 52 liters, as officially announced. The 2017 Buick Verano uses 92-octane gasoline, with a fuel consumption of 5.9-6.3L per 100 kilometers. A full tank can cover a distance of 825-881km. During daily driving, it is necessary to always pay attention to the remaining fuel level. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
20
0
Share
More Forum Discussions

What series does Bridgestone tires have?

Bridgestone tires have the following series: passenger car series, SUV series, RFT series, winter series, and Potenza. Taking the tire specification 275/35R19 as an example: The first number 275 represents the tire width of 275MM, 35 indicates the aspect ratio of the tire section is 35%, meaning the section height is 35% of the width, the letter R stands for radial tire, and 19 represents the rim diameter of 19 inches. In addition to the model, the tire also carries the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire for practical use, such as "Standard Rim 5.00F".
8
3
Share

What does 4*4 mean in cars?

4*4 in cars means that the vehicle has four wheels, and all four wheels are drive wheels. The following are the classifications of four-wheel drive systems: 1. Part-time 4WD: This is a four-wheel drive system where the driver can manually choose between two-wheel drive and four-wheel drive. The driver can switch between two-wheel drive or four-wheel drive modes by engaging or disengaging the transfer case based on road conditions. This is the most common drive mode for off-road vehicles or 4WD SUVs. 2. On-demand 4WD: As the name suggests, this system engages four-wheel drive only when necessary, otherwise remaining in two-wheel drive. This term distinguishes it from part-time 4WD, which requires manual switching between two-wheel and four-wheel drive, and full-time 4WD, which operates in four-wheel drive under all conditions.
2
0
Share

What is the optimal charging range for Model Y?

There are mainly two scenarios for the suitable charging range of Model Y, as detailed below: 1. Daily use: Charge up to 80%, then recharge after driving 200KM. 2. Long-distance travel: Charge up to 95%, and recharge after driving over 100KM. Below are additional tips for maintaining your car battery: 1. Turn off lights and audio before parking and shutting off the engine. 2. Avoid leaving the air conditioning on when the engine is off. 3. Drive the car for a certain distance periodically. 4. Regularly clean the battery. 5. Prevent battery discharge. 6. Check the battery every six months.
19
0
Share

Why does the scooter lack power when going uphill but performs well on flat roads?

Scooter lacking power when going uphill but performing well on flat roads indicates insufficient power and torque output from the engine. Here are specific reasons for this issue: 1. Abnormal fuel supply system: Apart from improper fuel supply caused by a clogged fuel filter, issues such as bent or blocked fuel lines cannot be ruled out. You can check the fuel flow by disconnecting the lower fuel line. 2. Clutch problem: The clutch is the power transmission mechanism connecting the engine flywheel and the transmission. It relies entirely on the friction between the pressure plate and the friction plate. If there is slippage between them, it directly leads to insufficient torque on the wheels, causing abnormal performance when climbing hills.
4
1
Share

Can ETC Be Used When Covered by Film?

In general, applying film will not affect the use of ETC. The film on the front windshield does not interfere with the ETC device and can provide heat insulation and sun protection. The film effectively blocks the heat generated by infrared rays and can also block ultraviolet rays. Medium and long waves of ultraviolet rays can penetrate thick glass, but applying heat-insulating film can block most of the ultraviolet rays. Here are some related introductions: 1. Benefits of applying film: It has safety and anti-explosion properties. The base layer of the film is polyester film, which has a strong anti-penetration function. Combined with the adhesive layer of the film, it can effectively prevent injuries caused by broken glass to drivers and passengers. It can create a private space. If the right type is chosen, the film makes it difficult to see inside the car from the outside while allowing clear visibility from inside the car, ensuring privacy and safety. 2. Introduction to the use of ETC: According to the regulations of the national and Shandong expressways, ETC cards cannot be used solely as electronic wallets. This means that when driving on expressways, the ETC card can only be used for payment at the exit if it has been used to record the entry information at the toll station. If a pass card is taken at the entrance, the ETC card cannot be used for payment at the exit.
6
5
Share

What Causes a Fuse to Blow?

Reasons for a blown fuse are introduced as follows: 1. Washing the engine bay with water: When cleaning the engine bay, since the fuse box is not perfectly sealed, remember not to rinse the fuse box directly with water, as this can easily cause a short circuit in the fuse, leading to failure of the vehicle's electrical components. Most fuse boxes have a clear icon prohibiting water rinsing. If the fuse box is dirty, gently wipe it with a damp towel. 2. Installing high-power headlights: After modifying the headlights, excessive power can easily blow the fuse. It is advisable to promptly replace it with a higher-current fuse and power cable to prevent overheating due to excessive current. 3. Using high-power electrical devices like the cigarette lighter: The cigarette lighter fuse is extremely prone to blowing. Generally, cigarette lighters use fuses rated between 15-25A. Since the vehicle voltage is 12V, it is recommended that the electrical appliances connected to the cigarette lighter do not exceed 300W, and for some small cars, not exceed 200W. As for high-power devices like car refrigerators and air pumps, it is better to avoid using the cigarette lighter for power supply.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.