What is the fuel tank capacity of the 2017 Bora?

1 Answers
DelMadeline
07/30/25 3:53am
The fuel tank capacity of the Bora 2017 1.6L Manual Comfort model is 55L. It is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain is front-engine, front-wheel drive. The front suspension is a MacPherson strut independent suspension, and the rear suspension is a torsion beam non-independent suspension. Among vehicles in the same class, the fuel tank capacity of the Excelle 2021 1.5L Automatic Entry model is 44L, and the Lavida 2022 1.5L Manual Fashion model has a fuel tank capacity of 51L. During actual refueling, the amount of fuel may exceed the nominal capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel amount may exceed the nominal tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while nearing F means the tank is sufficiently full.
Was this review help?
12
5
Share
More Forum Discussions

How to Connect Bluetooth in Mercedes-Benz C-Class?

In-car Bluetooth is primarily used for connecting with mobile phones. The phone can search for the Mercedes-Benz in-car Bluetooth and pair with it. Here is some additional information: 1. Dimensions: The C-Class is one of the youngest series in the Mercedes-Benz lineup, with body dimensions of 4581mm*1810mm*1448mm and a wheelbase of 2760mm. 2. Configuration: The new C-Class sedan is equipped with an active safety system, intelligent lighting system, preventive safety system, passenger safety protection system, rescue tools, etc., making it comfortable, refined, practical, and top-notch in safety.
2
0
Share

What does it mean when the engine authentication fails and the car won't start?

Engine authentication failure preventing ignition may be due to a depleted key fob battery - try replacing the remote's battery. It could also indicate a malfunction in the push-to-start system, or potential faults in the body control module or electrical circuits. It's recommended to contact your local 4S dealership for diagnostic testing and repairs. An engine is a machine that converts other forms of energy into mechanical energy, originally developed in England. This term can refer either to the power generation unit alone or the entire machine including the power system. Engine types include internal combustion engines, external combustion engines, electric motors, etc. An external combustion engine burns its fuel outside the engine itself, with the engine converting this thermal energy into kinetic energy.
11
1
Share

How to Deal with Continuously Increasing Car Fuel Consumption?

If your car's fuel consumption keeps increasing, you should promptly check the tire pressure and wear level, clean carbon deposits, and inspect the oxygen sensor. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: The initial low-speed acceleration phase is the peak fuel consumption period, so gently pressing the accelerator during startup can prevent excessively high RPM and effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM, as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and clean carbon deposits periodically. 4. Avoid sudden braking: Anticipate road conditions in advance to avoid sudden braking, which not only enhances driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to coast.
18
0
Share

Is there still oil left in the hose after refueling at a gas station?

The fuel nozzle at a gas station delivers oil through a fuel pump. After each refueling, the one-way valve inside the nozzle closes, preventing the fuel from flowing back into the dispenser. No matter how much you shake the nozzle, the oil in the hose will not leak out. Additionally, due to the fuel pump, the hose is always filled with fuel. Even if you just finished refueling, the next vehicle can immediately use the nozzle without any waiting time. Therefore, drivers don't need to worry about the gas station withholding oil from the hose—the exact amount you paid for has been fully added to your fuel tank.
2
3
Share

What is the correct method for adding coolant?

Correct steps for adding antifreeze to a car: 1. Add antifreeze from the radiator filler port until the radiator is full. Unscrew the reservoir cap, add antifreeze up to the "Max" mark, being careful not to exceed it. 2. Replace and tighten both the radiator cap and the reservoir cap. 3. Start the engine and let it idle for 2-3 minutes, then open the radiator cap. As some air is expelled from the cooling system, the antifreeze level will drop. At this point, add more antifreeze until it reaches the "Max" mark again. 4. Securely close the radiator cap.
15
3
Share

What is the fuel tank capacity of the Great Wall M4?

The Great Wall M4 has a fuel tank capacity of 45 liters. The vehicle dimensions are 3995mm in length, 1728mm in width, and 1617mm in height, with a wheelbase of 2383mm. It is a 5-door, 5-seater SUV with a 6-speed AMT transmission and a top speed of 171 km/h. The engine is a 1.5L L4 naturally aspirated unit, delivering a maximum horsepower of 106ps and a maximum torque of 138nm. The car features front-wheel drive, with a MacPherson independent front suspension and a compound torsion beam rear suspension. The steering assistance is mechanical hydraulic, and the body structure is of a unibody type.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.