What is the fuel tank capacity of the 2016 Volkswagen Bora?

What does a white parking space line mean?

White parking space lines indicate paid parking spaces. Here is additional information: White parking spaces: Indicate that this parking space is a paid parking space. In areas with white markings, roadside signs should be checked to determine whether parking is actually allowed here, as not all white lines on the roadside indicate parking spaces. Even in paid parking zones, parking is not always permitted and must comply with the instructions on roadside signs, such as 'No parking during the day,' 'Free parking at night,' 'Penalty for overtime parking,' or 'Paid parking hours.' Yellow parking spaces: Indicate that this parking space is an exclusive parking space. Exclusive parking spaces are generally reserved for special vehicles, such as fire trucks. If the yellow line is a solid single line, it means 'No parking,' and parking is not allowed in areas marked with yellow single solid lines or yellow curbs. If the yellow line is a dashed line, it means temporary parking is allowed, but long-term parking is not permitted.

20

2

Share

What is a PCV Valve in a Car?

PCV valve, which stands for Positive Crankcase Ventilation, is an active ventilation control system. It is a metering control valve installed between the engine crankcase ventilation system and the intake system. The PCV valve is controlled by vacuum and regulates the flow of oil fumes from the crankcase ventilation system into the intake system. The flow rate is higher when the engine is running at high speeds compared to low speeds. Additionally, the PCV valve should cut off ventilation to prevent crankcase explosions in the event of engine backfire. At the end of the engine's combustion process, some unburned air-fuel mixture leaks into the crankcase under high pressure through the piston rings. This leakage is referred to as "blow-by" in the industry. If not removed, these blow-by gases can escape into the atmosphere, causing pollution, and can also dilute the engine oil, leading to premature oil degradation and accelerated engine wear. The PCV system mainly consists of ventilation hoses and the PCV valve. One hose typically connects the air cleaner to the valve cover, while the other connects the PCV valve to the intake manifold. Methods to determine if the PCV valve is functioning properly: With the engine idling, clamp the hose between the PCV valve and the vacuum source. If the engine speed drops by 50r/min or more, it is normal. Otherwise, check for blockages in the PCV valve and hoses. Additionally, remove the PCV valve from the valve cover and place your finger over the valve's intake port. If you feel strong vacuum suction, it is functioning normally.

19

1

Share

Where is the left turn signal located on a car?

The turn signal switch is located on the lever behind the left side of the steering wheel. Pushing it downward with your left hand activates the left turn signal, while pushing it upward activates the right turn signal. When the turn signal is activated, the front, rear, and side turn signal lights will flash simultaneously to alert nearby vehicles and pedestrians. Turn signal lights are located at both the front and rear of the vehicle. Some cars also have turn signal lights on the sides, rear window glass, or side mirrors. It is recommended that drivers activate the appropriate flashing indicator in advance before turning to warn pedestrians or vehicles in front of or behind the car of the intended direction of travel. Types of turn signal lights: There are three types: resistance wire type, capacitor type, and electronic type. The resistance wire type can be further divided into thermal wire type (electric heating type) and blade type (snap-action type), while the electronic type can be divided into hybrid type (with contact relays and electronic components) and fully electronic type (without relays). The snap-action flasher operates on the principle of thermal expansion and contraction, using the thermal effect of current to cause the spring blade to make sudden movements, thereby connecting and disconnecting the contacts to achieve light flashing. Construction of turn signal light tubes: The light tubes use xenon tubes with a microcontroller-controlled circuit, enabling uninterrupted alternating flashing between left and right sides.

2

3

Share

What to Do If One Eye Fails the Driver's License Renewal Physical Exam?

If one eye fails the driver's license renewal physical exam, you can wear glasses or use other methods to correct your vision to meet the passing standard. If wearing glasses still does not meet the standard, try a different pair of glasses and continue testing until you pass. If you still cannot meet the passing standard after trying other methods, you will not be able to renew your driver's license. Note: If you wear glasses during the vision test, you must also wear them in the photo. Driving does not require perfect uncorrected vision, as long as your corrected vision meets the requirements. Vision requirements for driver's license renewal: For the renewal of a standard car driver's license, the vision requirement is the same as for the initial license training exam: corrected vision must reach 4.9. For driving large buses, trucks, or urban buses (medium and large vehicles), the corrected vision must be 5.0 or higher. If you do not meet the standard (even after correction), you cannot obtain or renew a license for that vehicle type. Physical exam requirements for driver's license renewal: In addition to vision requirements, the renewal process requires no red-green color blindness. While color weakness is not strictly prohibited, it depends on the hospital's test results. There are also specific height requirements: for private car licenses (Class C), the height requirement is relatively low. For medium-sized buses, the minimum height is 150 cm, while for large trucks and buses, it is 155 cm.

2

4

Share

What should be noted for cars without ABS?

Cars without ABS require extra caution on slopes and complex road conditions, maintaining a low and steady speed is advisable. When descending slopes, use a lower gear and avoid continuous braking to prevent overheating of brakes which could lead to safety issues. Additionally, on slippery surfaces or at higher speeds, employing the technique of intermittent braking (pump braking) is necessary to achieve safe deceleration. How car ABS works: During braking, ABS rapidly assesses wheel lock-up status via speed signals from each wheel's sensor. It closes the normally open inlet solenoid valve for wheels beginning to lock, maintaining consistent braking force. If locking persists, the normally closed outlet solenoid valve opens, allowing brake pressure to rapidly decrease through a direct line to the brake fluid reservoir, preventing complete wheel lock-up due to excessive braking force. This keeps braking at the optimal point (20% slip rate), ensuring maximum braking efficiency and driving safety. Functions of car ABS: Maximizes brake performance, reducing braking time and distance; Effectively prevents vehicle skidding and fishtailing during emergency braking, ensuring excellent driving stability; Allows steering during emergency braking, maintaining good steering control; Minimizes intense friction between tires and road surface, reducing tire wear.

12

3

Share

What is the actual fuel consumption of the 2.5L Audi A6L?

2.5L Audi A6L has an actual fuel consumption of 7.6L/100km. The Audi A6L is a mid-to-large-sized sedan launched by Audi. This model has six variants, all equipped with a 2.5L 204-horsepower V6 engine, with a maximum power output of 150kW and a maximum torque of 250Nm. The fuel tank capacity of all six variants of the 2.5L Audi A6L is 75L, meaning a full tank can cover a distance of 75/7.6*100=989km. Automobile fuel consumption is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and ambient temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle in advance when approaching traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger displacements generally consume more fuel than those with smaller displacements because larger displacements typically mean higher power output, requiring more gasoline for combustion. Heavier vehicles also have higher fuel consumption due to the need for greater driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low ambient temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine control unit may command higher idle speeds to warm up the engine, further increasing fuel consumption.

5

2

Share

What is the fuel tank capacity of the 2016 Volkswagen Bora?

What does a white parking space line mean?

What is a PCV Valve in a Car?

Where is the left turn signal located on a car?

What to Do If One Eye Fails the Driver's License Renewal Physical Exam?

What should be noted for cars without ABS?

What is the actual fuel consumption of the 2.5L Audi A6L?

What Lights Are Included in Headlights?

What do the M and S on the car represent?

Is it illegal to apply black car wrap on a white car?

How many points are deducted for brushing the line during a right-angle turn?