What is the fuel tank capacity of the 2016 Changan CS35?

1 Answers
DelHector
07/29/25 9:22pm
The fuel tank capacity of the 2016 Changan CS35 is 52 liters. The engine model is 4G15T. The vehicle has a length of 4160mm, a width of 1810mm, and a height of 1670mm. The 2017 Changan CS35 1.5T manual sport version also has a 52-liter fuel tank. Similarly, the 2015 Changan CS35 1.6L manual comfort version (China V standard) also features a 52-liter fuel tank. During actual refueling, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity marked by automobile manufacturers is measured from the bottom of the tank to the safety limit level. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the calibrated tank volume. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is near E, it indicates low fuel, while proximity to F signifies sufficient fuel.
Was this review help?
7
2
Share
More Forum Discussions

Can new energy vehicles be registered as commercial vehicles?

Local policies vary, and whether a vehicle can be registered as a commercial vehicle requires consultation with the local vehicle management office. All vehicles participating in commercial operations must meet the following main technical conditions: 1. The vehicle must be clean and fully equipped: exposed bolts and nuts must be securely fastened, and the vehicle's power performance must be good. 2. The engine must operate well: fuel and lubricant consumption should be normal, with no knocking noises when the coolant temperature is above 50°C, and no leakage of oil, water, gas, or electricity. 3. The chassis assemblies must be securely connected: no overheating or abnormal noises, with good performance and no lack of lubrication; leaf springs must not be broken or misaligned; tire pressure must be normal; connection and protective devices for vehicles and trailers must be complete and reliable. 4. Steering must be light and flexible: tie rods and ball studs must not be loose, with good performance, front wheel alignment must meet requirements, foot brake efficiency must comply with regulations, hand brakes must be reliable, and trailer brake devices must be effective.
14
5
Share

What is taught on the first day of Subject 2?

On the first day of Subject 2, the main learning content is familiarizing with the gear positions. Below is more information about Subject 2: 1. Content: Subject 2 includes five items: reversing into a parking space, stopping and starting on a slope, turning at a right angle, parallel parking, and driving through curves. 2. Passing standard: For large vehicles, a score of 90 is required to pass, while for other vehicle types, a score of 80 is sufficient. Additional information: 1. Subject 1: The full score for Subject 1 is 100, and a score of 90 is required to pass. 2. Subject 3: The full score for Subject 2 is 100. For large buses, trailers, city buses, medium-sized buses, and large trucks, a score of 90 is required to pass, while for other vehicle types, a score of 80 is sufficient.
4
5
Share

How Often Should the Transmission Fluid of the Sylphy be Changed?

Sylphy's transmission fluid should be changed every two years or every 40,000 kilometers. Transmission fluid is an oil product that keeps the gear system clean, providing lubrication to extend the lifespan of the transmission device. It also offers highly effective lubrication at low temperatures and reduces oil loss under harsh operating conditions. The Sylphy is a compact car under Nissan, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm. The 2019 National VI version of the Sylphy is equipped with a 1.6-liter inline 4-cylinder naturally aspirated engine.
4
5
Share

Is It Normal for New Car Tires to Have No Rubber Hairs?

Normal. Rubber hairs are small rubber burrs on tires, known as "little braids" in the industry, caused by vent holes in the tire vulcanization mold. Nowadays, technologically advanced tire manufacturers have already resolved this issue. More details about tire rubber hairs: 1. Rubber hairs do not increase tire noise: Tire noise mainly occurs when the vehicle is driving at high speeds, and the tire rotates rapidly, compressing and releasing the air within the tire treads. This continuous "compression-release" process generates noise. The faster the speed and the heavier the vehicle, the greater the noise. Under such high-speed rotation, the effect of rubber hairs is negligible. 2. Rubber hairs do not enhance grip: This is only theoretical. If the tire surface has rubber hairs, it may make the surface rougher, theoretically increasing friction. However, the tiny rubber hairs contribute insignificantly to the tire's overall friction. 3. Relationship between rubber hair length and tire quality: The length of rubber hairs depends on the equipment and manufacturing process used to make the tire. The length of rubber hairs cannot be used to judge the quality of a tire, and rubber hair lengths vary among different tire specifications and models.
18
3
Share

How much engine oil should be added to the new Passat 330?

The new Passat 330 requires approximately 4.5L of engine oil. After adding oil, check the dipstick to ensure the oil level is between the upper and lower limits. Measurement method: First pull out the dipstick - there is a concave-convex area at its end with grid patterns and horizontal lines indicating the oil level range. Wipe clean the first pull-out, then reinsert and check again. The oil level is acceptable as long as it's within the grid lines. Generally, the oil quantity should be slightly below the dipstick's maximum mark - avoid overfilling. Additionally, consider factors like oil specification, season, climate, engine displacement, and technical performance when adding oil.
4
2
Share

What Materials Are Used in New Energy Batteries?

New energy batteries are made of superconducting materials, solar cell materials, hydrogen storage materials, magnetic materials, and nanomaterials. Precautions for using new energy vehicle batteries: 1. During daily car washing, avoid impact and water ingress on the power battery pack to prevent affecting the battery's lifespan; 2. Pay attention to the ambient temperature during charging, maintain good ventilation to avoid difficulty in heat dissipation during the charging process; 3. When the driver notices low battery level through the dashboard feedback, charge promptly to avoid affecting the power battery's performance or even shortening its lifespan due to power depletion; 4. If a battery overheating alarm occurs during driving, stop the vehicle to cool down the battery and continue driving only after the overheating warning light turns off.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.