What is the fuel tank capacity of the 2016 Baojun 560 in liters?

1 Answers
SanPhoebe
07/30/25 5:32am
2016 Baojun 560 has a fuel tank capacity of 52 liters. The size of the fuel tank is directly related to the vehicle's fuel consumption. Generally, a full tank can support a driving range of over 500 kilometers. For example, a car with a fuel consumption of 10 liters per 100 kilometers typically has a fuel tank capacity of around 60 liters. Most automobile manufacturers follow a principle where a full tank of fuel supports a driving range of approximately 600 kilometers, never less than 500 kilometers. While a large fuel tank capacity is beneficial, the most fundamental aspect is mastering fuel-saving techniques in daily driving. Under the premise of ensuring safety, avoiding sudden acceleration, sudden deceleration, and other aggressive driving actions can significantly reduce fuel consumption.
Was this review help?
18
1
Share
More Forum Discussions

How is vehicle speed expressed in code?

Most domestic vehicles use KM/H as the unit on their speedometers. Simply put, it displays the speed at which the car is moving. For example, if the speedometer needle points to 60, it means the car can travel 60 kilometers in one hour at its current speed. Below are precautions for driving on highways: 1. Drive in designated lanes: Highways have clearly marked lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, return to your appropriate lane promptly after completing the overtaking maneuver, and avoid occupying other lanes for extended periods. Additionally, emergency lanes should not be occupied for long without special reasons. 2. Maintain a safe speed and avoid speeding: The dangers of speeding are well-known, causing irreparable consequences both locally and on highways. 3. Maintain a safe longitudinal distance between vehicles: Generally, on dry roads with good braking conditions, the distance between vehicles (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, maintain at least 80 meters; at 100 km/h, maintain at least 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, double the distance. 4. Observe traffic signs: Always watch for roadside and overhead signs and markings, and drive slightly to the right to avoid running over the right lane divider, providing enough lateral space for overtaking vehicles. 5. Do not arbitrarily occupy emergency lanes during accidents: Traffic incidents are inevitable on highways. If other vehicles cause an accident blocking the lane, do not occupy the emergency lane, preventing rescue vehicles from accessing the scene. 6. Avoid fatigue driving and take timely breaks: Fatigue driving is extremely dangerous on highways. When fatigued, reaction times slow, making it difficult to respond correctly to sudden situations.
3
3
Share

What is the purpose of a car tachometer?

The main functions of a car tachometer include observing whether the car is started, determining the optimal shifting moment, indicating the safe operating range of the engine, and detecting potential vehicle malfunctions. Engine speed reflects the working condition of the engine and is one of its most important parameters. The unit symbol for the car tachometer is r/min, and the unit name is revolutions per minute. The scale range of the tachometer reflects the engine's speed range, where the white-marked section indicates the safe speed range, and the red-marked section indicates the dangerous speed range. Below is a detailed explanation: Observing whether the car is started. One use of the tachometer is to observe whether the car is started. When the car is not running, it will be in an idle state. At this time, the tachometer needle does not point to 0 but to a position above 700 rpm. Therefore, at any time, if you are unsure whether the vehicle is started, you only need to check the tachometer. Determining the optimal shifting moment. For example, when you want stronger power or when driving uphill or downhill, it is advisable to shift gears after appropriately increasing the engine speed. Alternatively, if you are pursuing fuel economy, ensure the car shifts at the lowest possible speed under smooth conditions. Even for automatic transmission models, manual mode can be used when pursuing power demands. In the past, many people relied on engine sound to shift gears, but as vehicle soundproofing improves, engine noise is hardly audible anymore. The most accurate method is to determine the shifting moment based on the engine speed. Detecting car malfunctions through the tachometer. For instance, using a stall test to check internal wear in an automatic transmission; if the engine speed is high while the vehicle speed is low, and fuel consumption increases significantly, it may indicate that the torque converter lock-up clutch is not engaging or the lock-up speed is too high. Performing an acceleration test in place can check the engine's working condition or whether the clutch in a manual transmission model is slipping. These are common diagnostic methods used by car mechanics. Indicating the engine's safe operating range. The tachometer usually has a red zone, typically above 6000 rpm. For the engine, maintaining excessively high speeds for prolonged periods can lead to poor lubrication performance and increased strain on the cooling system. Prolonged operation in the red zone can cause varying degrees of damage to engine components. Therefore, the engine's condition can be assessed based on the safe range indicated by the tachometer.
17
3
Share

What does it mean when the car displays ABS?

When the car displays ABS, it indicates a malfunction in the Anti-lock Braking System. Since this system is crucial for vehicle safety, prompt repairs are essential to avoid affecting normal operation. The ABS system enhances driving safety by improving the vehicle's stability during emergency braking. Common causes of ABS failure include wheel speed sensor issues. These sensors, typically mounted on the wheels, can get covered by dirt, disrupting speed signal transmission. This prevents the ABS computer from processing speed data, triggering the warning light. The solution involves cleaning debris from the tires and adjusting the gap between the sensor and the signal ring.
9
4
Share

Which cars have a lion emblem?

Peugeot and SAIC Roewe are the car brands with lion emblems. Peugeot is a French automobile manufacturer, and its logo features a standing lion; Roewe is a car brand under Shanghai Automotive Industry Corporation, with a logo composed of two standing oriental lions. Taking the Peugeot 408 as an example: it is equipped with a 1.2T L3 turbocharged engine, with a maximum torque of 230 Nm and a maximum horsepower of 136. It comes with a 6-speed dual-clutch transmission. The car's dimensions are 4750mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2730mm, and a top speed of 205 kilometers per hour.
8
0
Share

How to Deal with Snow on the Car Windshield?

Here are the methods to deal with snow on the car windshield: 1. Warm up the car sufficiently to allow the engine coolant temperature to rise; 2. Once the engine coolant temperature has risen, turn on the heater and set it to blow upward toward the windshield at the highest setting; 3. When the heater melts the frost on the outside of the glass, gently wipe it away with a car cleaning cloth; 4. At this point, you can spray some windshield washer fluid and use the wipers to clean the glass. Make sure the frost is completely melted before using the wipers to avoid damaging the wiper motor; 5. You can also use a dedicated automotive defroster spray, applying it evenly on the windshield.
19
4
Share

What are the differences between OEM matching parts and genuine parts?

Differences between OEM matching parts and genuine parts: 1. OEM matching parts: These are not genuine car parts but are produced by the same suppliers that manufacture parts for the original car manufacturers. They are also sold in the market, including brand-name parts and imitations. 2. Genuine parts: These are sourced from brand manufacturers contracted by car companies, produced according to the specifications and requirements of specific car models. The car companies impose strict quality controls during production, and these parts are supplied exclusively to 4S stores. However, car companies have annual sales targets for auto parts. 3. Additional information: The main differences between OEM matching parts and genuine parts lie in their distribution channels, quality, and price.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.