What is the fuel tank capacity of the 2014 Verna?

2 Answers
OCorey
07/29/25 8:41am
The fuel tank capacity of the 2014 Verna is 43 liters. This data is officially released, and owners of the 2014 Verna can also check it on the vehicle's configuration sheet. The fuel grade for the 2014 Verna is 92 octane, with a fuel consumption of 6.1-6.6L per 100 kilometers. A full tank of fuel can cover a distance of 651-704 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. Generally, when there are only 2 segments left on the fuel gauge, it's time to refuel to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is the volume from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to ensure that the fuel in the tank can expand when the temperature rises without overflowing the safe space of the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked fuel tank capacity.
Was this review help?
14
5
Share
DeDamian
08/11/25 6:15pm
I remember the fuel tank capacity of the 2014 Verna is 43 liters. In actual driving, fuel consumption varies depending on road conditions, averaging about 7 liters per 100 kilometers in the city and possibly dropping to 6 liters on the highway. This means that with a full tank, the theoretical range can reach 600-700 kilometers. When I drive, I pay attention to the fuel gauge to avoid running on low fuel and damaging the fuel pump. When refueling, don’t fill it up completely—leave some space for fuel thermal expansion, and choose reputable gas stations to ensure quality. In the long run, the size of the fuel tank affects refueling frequency, and combining fuel-efficient driving habits like reducing sudden acceleration can extend the vehicle’s lifespan and save costs. This car is considered economical and practical in its class, with simple fuel tank maintenance—just avoid the accumulation of fuel impurities.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

What brand is the original Volkswagen shock absorber?

Volkswagen original shock absorbers are Sachs brand. The shock absorber buffer rubber sleeve---generally speaking, it is not easy to damage and does not belong to the vulnerable parts. Vehicle specifications: The buffer rubber has an open ring shape with a groove on the top and bottom (to accommodate the coil spring), and two, three, or more holes on the side. According to the standard specifications of spring spacing, buffer rubbers are divided into seven standard models: A+A, A, B, B+, C, D, E, and F. Theoretically, these eight models can cover the needs of most coil spring shock absorber models worldwide. Reducing the lifespan of the suspension system: The product itself is relatively hard, or becomes hard during use. Simply put, the so-called "buffer rubber" that is hard or even cracked is indeed harmful rather than beneficial to the shock absorber system.
5
2
Share

Where to Pay Purchase Tax When Buying a Car in Another Location and Registering It Locally?

When buying a car in another location and registering it locally, the purchase tax should be declared and paid at the competent tax authority in the location where the car is registered. Before going to the vehicle management office for registration, visit the local state tax bureau or tax authority first. After paying the purchase tax, bring all the relevant materials obtained. Introduction to Purchase Tax: Vehicle purchase tax is a type of tax levied on units and individuals who purchase specified vehicles within the country, derived from the evolution of vehicles. The purchase tax is calculated based on the selling price of the car, with the taxpayer being the unit or individual purchasing the taxable vehicle, and the tax rate is 10%. Tax Payment Location: For purchasing taxable vehicles that require registration, the tax should be declared and paid at the competent state tax authority in the vehicle registration location; for taxable vehicles that do not require registration procedures, the tax should be declared and paid at the competent state tax authority in the taxpayer's location.
17
1
Share

What does airbag on the seat belt mean?

Airbag on the seat belt refers to the safety airbag. Conditions for triggering the airbag: To trigger the airbag, the following conditions must be met: the vehicle speed must exceed 50 km/h, the instantaneous opposite-direction acceleration must reach over 40g, the collision point must be near the airbag sensor, and the impact must be against a rigid object. Only when all these conditions are met simultaneously will the airbag be triggered. Components of the airbag: It mainly consists of the airbag sensor, collision safety airbag, and electronic control device. The driver-side collision safety airbag is installed in the steering wheel, while the passenger-side collision safety airbag is generally installed on the dashboard.
11
5
Share

How Often Should Engine Oil Be Changed After an Engine Overhaul?

After an engine overhaul, the engine oil should be changed at the end of the break-in period (1,000-1,500 kilometers). Extended service life requires break-in maintenance: When a car is newly acquired, it enters the break-in period. Although the break-in period is not as critical as it used to be, it remains relatively important as it affects subsequent vehicle usage and maintenance. During the break-in period, attention should be paid to the coordination of various components of the car. If any abnormalities are noticed, they should be addressed during the first maintenance. Extended service life requires routine maintenance: Maintenance is not a one-time task but a long-term upkeep process. Daily attention should be paid to maintenance details during regular vehicle use. For example, before setting off, clear debris around the windshield wipers, check for any oil leaks, and listen for unusual noises while driving. If any signs of potential vehicle malfunctions are detected, they should be promptly addressed and resolved.
20
3
Share

What are the reasons for an electric vehicle having no power and not being able to charge?

The reasons for an electric vehicle having no power and not being able to charge are as follows: Damaged charger of the electric vehicle: The capacitor in the circuit may be damaged, or the wire connecting the charger to the battery may be broken, resulting in the charger's light being on but the battery not charging. Damaged battery: The wire connecting the batteries in series inside the battery may be melted, or the power wire at the battery charging port may be melted. Use a multimeter to test if the battery's resistance is infinite. If it is, it indicates a melted wire. Open the battery box and reconnect the wire. Damaged battery pack: Open the battery box and measure the voltage and resistance of each battery in the pack. Replace any abnormal ones. Alternatively, the battery may need to be awakened. Use a charger with a voltage higher than the charging voltage to charge and awaken the battery. Low-temperature conditions: When the temperature is too low, the electrolyte inside the battery may freeze, making it impossible to charge. Wait for the electrolyte to thaw before charging. Additionally, avoid charging abruptly in such conditions and pay attention to regular battery maintenance.
3
5
Share

Will Changing Tires Damage the Sensors?

Changing tires will not damage the sensors. Precautions for sensor usage: Faults must be promptly resolved or the equipment replaced. Once a sensor fails, the computer of the electronic fuel injection system will not receive information about the oxygen concentration in the exhaust pipe, thus unable to perform feedback control on the air-fuel ratio. This will lead to increased engine fuel consumption and exhaust pollution. Function of sensors: Sensors are critical feedback components in the electronic fuel injection engine control system. They are key parts for controlling vehicle exhaust emissions, reducing environmental pollution caused by vehicles, and improving the fuel combustion quality of the engine.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.