What is the fuel tank capacity of the 2014 Toyota Corolla?

2 Answers
Nancy
09/02/25 4:25am
2014 Corolla has a fuel tank capacity of 55 liters, using 92-octane or higher unleaded gasoline. It is a compact car under FAW Toyota. Among similar models, the Nissan Sylphy has a 55-liter fuel tank, while the Volkswagen Santana has a 52-liter fuel tank. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the dashboard, marked with E and F. When the pointer approaches E, it indicates low fuel, while nearing F means sufficient fuel. Fuel tank maintenance includes: Draining accumulated water and sediment from the tank, and checking for oil leaks at pipe joints and switches. For tanks with air and vapor valves, ensure the vent holes are unobstructed. The filler inlet filter should remain intact to prevent impurities from entering the tank and clogging the fuel system during refueling. The sealing gasket on the fuel cap should also be in good condition to prevent fuel spillage while driving.
Was this review help?
17
3
Share
DelAbel
09/14/25 6:37am
Yes, the 2014 Toyota Corolla has a fuel tank capacity of 13.2 gallons, which is approximately 50 liters. As a young commuter who frequently travels to and from work, I find this size super practical. With an average fuel consumption of around 30 miles per gallon, a full tank can cover nearly 400 miles, significantly reducing the number of refueling stops. For daily work commutes, filling up once a week is usually enough, saving the hassle of frequent gas station visits. However, one thing to note is that the fuel tank cap must have good sealing; otherwise, evaporation losses can waste fuel, so regular checks are recommended. Additionally, don’t ignore the fuel gauge on long trips; filling up early can help avoid awkward situations, as a full tank ensures peace of mind during unexpected traffic jams. Keeping these tips in mind can enhance your driving experience.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What are the uses of recycling waste engine oil from vehicles?

The uses of recycling waste engine oil from vehicles are: 1. It can be refined again to produce low-grade lubricating oil; 2. It can be refined into industrial raw materials such as asphalt. Engine oil, which is lubricating oil, serves the following functions: lubrication and wear reduction, cleaning and dispersion, cooling and temperature reduction, sealing and leakage prevention, corrosion and rust prevention, and shock absorption and buffering. The method for changing engine oil is: 1. Start the vehicle's engine to warm it up; 2. Unscrew the oil drain bolt; 3. Remove the oil filter; 4. Apply new engine oil to the gasket of the new oil filter; 5. Pour the new engine oil into the oil pan; 6. Check for leaks in the lower part of the engine and inspect the oil dipstick, then start the engine for testing.
16
5
Share

What are the steps for cleaning a car's air conditioning system?

The steps for cleaning a car's air conditioning system are: 1. Purchase air conditioning cleaner and prepare a cloth; 2. Remove the air conditioning filter; 3. Clean the air conditioning filter; 4. Lower the car windows, turn on the air conditioning, and increase the fan speed; 5. Activate the external circulation mode; 6. Turn on the AC switch and let the air conditioning system run for about 10 minutes; 7. Reinstall the air conditioning filter. The reasons for cleaning the car's air conditioning system are: 1. Dust and dirt accumulate at the air intake, air ducts, fan, and evaporator surface, leading to mold growth in the air ducts; 2. Reduced cooling capacity of the air conditioning and noticeable odors; 3. Prolonged exposure to a cabin filled with mold and odors can harm the driver's health or cause illnesses.
3
0
Share

What kind of adhesive should be used for car radiator leakage?

Car radiator leakage can be repaired with AB adhesive, which is another name for a two-component adhesive consisting of a base glue and a hardener. The reasons for car radiator leakage are: 1. Pipe rupture caused by oil emulsification; 2. The radiator cap is not fastened tightly; 3. Leakage at the rubber pipe joint; 4. Radiator tube rupture; 5. Radiator rupture. The methods to determine car radiator leakage are: 1. Fill the radiator with water; 2. Check after a few hours to see if the water level has dropped; 3. Look for water on the ground. The car radiator, also known as a heat exchanger, is part of the car's cooling system and consists of an inlet chamber, an outlet chamber, a main plate, and a radiator core. The functions of the car radiator are: 1. To absorb heat from the cylinder block; 2. To prevent engine overheating.
13
2
Share

What is the Nissan model starting with 'A'?

Nissan's new Altima, also known as the Nissan Teana in North America, is Nissan's competitor against the Toyota Camry and Honda Accord in the North American market. Here are the specific details about the Altima: 1. Model: A mid-size car with dimensions of 4901mm in length, 1850mm in width, and 1450mm in height, and a wheelbase of 2825mm. 2. Engine: Equipped with a 2.0L turbocharged engine and a 2.0L naturally aspirated engine. The 2.0L naturally aspirated engine has a maximum power of 115kw and a maximum torque of 197 Nm. The 2.0L turbocharged engine has a maximum power of 179kw and a maximum torque of 371 Nm. Both engines are paired with a CVT transmission. 3. Suspension: The front suspension uses a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension.
3
2
Share

How to Open the Hood of an Avalon?

The method to open the hood of an Avalon: Locate a lever near the driver's side pedal, pull the lever to slightly open the hood, then exit the vehicle and reach into the gap to release the safety latch, allowing the hood to be fully opened. This is a common method for opening the hood in most vehicles. The Avalon is a mid-size sedan produced by Toyota, equipped with two types of engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine, paired with an 8-speed automatic transmission. Taking the 2.0-liter naturally aspirated engine as an example: it has a maximum power of 178 horsepower and a maximum torque of 210 N·m, with the maximum power achieved at 6600 rpm and the maximum torque between 4400 to 5200 rpm.
2
1
Share

What Type of Car is the Lynk & Co 03+?

The Lynk & Co 03+ is positioned as a compact sedan, and it is a performance car built on the foundation of the Lynk & Co 03. It can be said that this is a performance sedan with a premium feel, as both its exterior and interior design reflect the characteristics of a performance vehicle. Below is an introduction to the relevant details: 1. In terms of appearance, the Lynk & Co 03+ is built on a new design concept, incorporating more sporty kits for decoration while maintaining the family-style design philosophy. 2. In terms of power, this car is equipped with a high-power version of a 2.0T turbocharged engine, which delivers a maximum power of 187 kW and a maximum torque of 350 Nm. 3. As for the transmission system, the engine is paired with an 8-speed automatic manual transmission.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.