What is the fuel tank capacity of the 2013 Volkswagen Lavida 1.4T model in liters?

1 Answers
Isaiah
07/29/25 7:21pm
The 2013 Lavida model comes in a total of 21 variants, with the 1.4T version having a fuel tank capacity of 55 liters. It offers 2 engine options: 1.4T and 1.6L, paired with 3 transmission choices: dual-clutch, manual, and automatic. The engine delivers a maximum power of 96.0kW, maximum horsepower of 131PS, and maximum torque of 225.0N·m. The vehicle dimensions are 4605×1765×1460mm (L×W×H). For reference, the 2018 and 2021 Lavida models have a fuel tank capacity of 51 liters, while the 2019 model has a capacity of 52.8 liters. During actual refueling, the amount of fuel filled may exceed the nominal capacity. This is because the manufacturer's specified tank volume is measured from the tank bottom to the safe fill level, leaving some space between this level and the tank opening. This design accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening, the actual refueled amount may surpass the nominal capacity. To check remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while nearing F means sufficient fuel.
Was this review help?
3
1
Share
More Forum Discussions

When the car veers to the right while moving forward, which direction should I turn the steering wheel?

When the car veers to the right while moving forward, you should turn the steering wheel to the left. During driving, keep the steering wheel steady and avoid making sudden changes in direction. When driving straight, focus your gaze far ahead while using your peripheral vision to monitor the area near the front of the car, the rearview mirrors, and the surrounding vehicles. Related information: 1. Steering wheel: A wheel-shaped device used to control the direction of cars, ships, airplanes, etc. In the 1950s, concept cars without steering wheels emerged. 2. Steering wheel frame: Typically made of zinc alloy or aluminum alloy, produced through die-casting. 3. Common issues: Steering wheel lock, steering wheel damage, steering wheel vibration.
20
1
Share

What is the actual fuel consumption of the Buick GL8 Classic 2.4?

The official combined fuel consumption of the 2.4L model of the Buick GL8 is 10L per 100 kilometers. The Buick GL8 business vehicle is equipped with a 2.4L naturally aspirated engine, with a maximum power of 123kW (167PS) and a maximum torque of 225Nm, paired with the Aisin S6 six-speed automatic transmission, delivering excellent performance in both comfort and fuel economy. More information about the Buick GL8 is as follows: 1. Interior: The wraparound dashboard still features the familiar Buick style, but the burgundy faux leather material replaces the wood trim in the older GL8, and the design of the air vents has been adjusted to match the curved stitching of the faux leather panels. 2. Powertrain: The GL8 continues to be powered by a 2.4L four-cylinder engine and a 3.0L V6 SIDI direct-injection engine, both paired with a 6-speed automatic transmission.
5
5
Share

What are the reasons for a car air conditioning compressor not working?

The reasons for a car air conditioning compressor not working are as follows: severe internal wear of the compressor, leading to inability to function properly; insufficient refrigerant in the car air conditioning system; circuit system failure, etc. Factors such as insufficient refrigerant in the car air conditioning compressor, relay failure, pressure switch tripping, and others may cause the car air conditioning compressor to fail to engage. Extension: 1. Function of the air conditioning compressor: The car air conditioning compressor is the heart of the car air conditioning refrigeration system, responsible for compressing and transporting refrigerant vapor. Compressors can be divided into fixed displacement and variable displacement types. Based on different working principles, air conditioning compressors can be categorized into fixed displacement compressors and variable displacement compressors. 2. Technical classification: Compressors can generally be divided into reciprocating and rotary types. Common reciprocating compressors include crankshaft connecting rod type and axial piston type, while common rotary compressors include rotary vane type and scroll type.
14
0
Share

What are the hazards of using engine braking?

Using engine braking poses no hazards. Below is an introduction to engine braking: 1. Benefits of engine braking: (1) It can help the vehicle brake quickly. When emergency braking is required, the combined action of engine braking and the braking system significantly improves braking effectiveness, which is clearly better than relying solely on the brakes when coasting in neutral. (2) It reduces the intensity of brake usage and minimizes wear on friction materials. When only deceleration is needed without emergency braking, engine braking can be utilized to slow down. 2. Usage of engine braking: (1) On slippery surfaces such as oil-coated roads, muddy or icy roads, engine braking should be used as much as possible, with minimal use of foot braking. (2) On steep roads like long downhill slopes or rugged mountain paths, engine braking must be used in combination with intermittent braking to control vehicle speed.
14
2
Share

What Causes the Abnormal Noise When Wipers Wipe the Windshield?

The reasons for abnormal noise when wipers wipe the windshield are as follows: 1. Quality issues with new wiper blades: If the wiper blades are newly replaced, there may be quality problems, resulting in abnormal noise. 2. Wiper aging: The material of wipers is rubber, which is prone to aging after prolonged exposure to sunlight, wind, and rain. Generally, the lifespan of wipers is about one to two years. 3. Foreign objects between the wiper and the windshield: This is a relatively common issue, mainly caused by small sand particles or other debris, which not only produces abnormal noise but may also scratch the windshield.
5
3
Share

How Many Digits Does a Vehicle Engine Number Have?

The common engine number typically consists of 7-8 digits. The sequence and content of the engine number may vary among different manufacturers. It generally includes the engine model, production date, and a randomly assigned serial number given when the engine comes off the production line. Some may also include a place-of-origin code. Engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and engine attributes for a batch of identical products. It represents information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static brake power. Engines installed in passenger cars or multi-purpose passenger vehicles are required to display the professional manufacturer, model, and production number of the engine. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's product line, and multiple engines can share the same model. The engine number, however, refers to the production serial number of the engine, where each engine is assigned a unique number that differs from all others. Composition of a Vehicle Engine Number: Front Section: Includes the product series code, generation symbol, and regional or corporate code. Manufacturers may choose appropriate letters as needed, but they must be approved and filed by the industry standardization authority. Middle Section: Comprises symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear Section: Consists of symbols for structural features and usage characteristics. Tail Section: Distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same series, the manufacturer selects an appropriate symbol. The rear and tail sections may be separated by a hyphen (-).
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.