What is the fuel tank capacity of the 2013 Volkswagen Bora?

1 Answers
DiEmilio
07/29/25 7:32pm
The 2013 Bora model has a total of 8 variants, with a fuel tank capacity of 55 liters. It comes with 2 engine displacements: 1.4T and 1.6L, and offers 3 transmission options: dual-clutch, manual, and automatic. The engine has a maximum power output of 96.0 kW, maximum horsepower of 131 PS, and maximum torque of 220.0 N·m. The vehicle dimensions are 4523 × 1775 × 1467 mm (length × width × height). For comparison, the 2020 and 2021 Bora models have a fuel tank capacity of 50 liters, while the 2019 Bora model has a capacity of 55 liters. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety level. There is additional space from the safety level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E (empty) and F (full). When the needle is close to E, it indicates low fuel, while nearing F means the tank is nearly full.
Was this review help?
4
2
Share
More Forum Discussions

Which country does the Dodge brand belong to?

Dodge is an American automobile brand headquartered in the United States. The founders of the Dodge brand were a pair of brothers born in Michigan, USA. Its car models mainly include the Viper, Challenger, Caliber, Avenger, Charger, etc. SUVs include the Durango and Nitro, while pickup trucks consist of the Dakota, Ram Truck, and Ram SRT-10. MPVs primarily feature models like the Caravan. The Dodge logo incorporates the surname "Dodge" of the Dodge brothers, with a graphic of a ram's head inside a pentagon, symbolizing the brand's strength, combativeness, and the simple yet elegant quality of Dodge vehicles. The overall logo signifies Dodge's ambition to conquer the global market. Key milestones in Dodge's development include: 1914: The Dodge brand was established, and the first Dodge vehicle rolled off the production line the same year. 1915: Dodge trucks became the main equipment for wartime use. 1928: The Dodge Motor Company was acquired by Chrysler Corporation, becoming a division of Chrysler. 1960s-1970s: Dodge supplied long-distance coaches, freight trucks, and buses to major Chinese cities like Beijing and Shanghai. 1983: The last "small Dodge" bus in China was decommissioned. 2007: Chrysler announced the official introduction of the Dodge brand to China.
11
4
Share

What is the difference between 1.2L and 1.5L engine displacement?

Here are the main differences between 1.2L and 1.5L engine displacement: 1. Turbocharging vs. naturally aspirated: Naturally aspirated engines offer higher stability and smoother power output; turbocharging can significantly improve fuel economy, reduce exhaust emissions, and maintain relatively low fuel consumption compared to naturally aspirated engines with similar power, but they have higher maintenance costs in the long run. 2. How to choose between 1.2L and 1.5L: If the consumer primarily drives in the city or for short distances at low speeds, the 1.2L engine is recommended. For highway driving or long-distance travel, the 1.5L engine is advised. This is because at high speeds, smaller displacement engines require more throttle input, while in city driving, larger displacement engines are less fuel-efficient than smaller ones.
18
0
Share

Is the Honda Civic Front-Wheel Drive or Rear-Wheel Drive?

The Civic is front-wheel drive. Here are the specific details about front-wheel drive: 1. Engine Position: The engine is placed at the front of the vehicle, and the front wheels drive the car, which is known as front-engine, front-wheel drive. 2. Vehicle Configuration: Only mid-to-high-end models and sports cars typically use front-engine, rear-wheel drive. Below are additional advantages of front-wheel drive: 1. Weight Reduction: The drivetrain shaft is omitted, reducing vehicle weight and making the structure more compact. 2. Space Efficiency: The engine compartment space is utilized more effectively. 3. Power: The engine is closer to the drive wheels, resulting in higher power transfer efficiency and better fuel economy. 4. Handling: Improves the car's handling stability and directional braking stability at high speeds.
5
5
Share

How Often Should the Transmission Fluid of Mitsubishi Outlander Be Changed?

Outlander's transmission fluid should be changed every 40,000 kilometers or every two years, whichever comes first. Below are the impacts of not changing the transmission fluid and an introduction to its functions: Impacts of not changing the transmission fluid: If the transmission fluid is not changed, it will lead to increased wear of internal moving parts, eventually causing abnormal noises inside the transmission and difficulties in shifting gears. Transmission fluid is an oil product that keeps the shifting system clean. Functions of automotive transmission fluid: Reduces friction and wear, controls the friction of the clutch and the performance of the synchronizer, carries loads (low-speed high torque, vibration loads), dissipates heat, reduces vibration and noise, removes contaminants from gear meshing—cleaning function, prevents corrosion, prevents pitting and surface metal tearing, isolates metal surfaces, and prevents direct contact between metal bodies.
5
2
Share

How to Remove Car Stickers?

Adhesive remover, high-pressure water gun, or a lighter can be used to remove car stickers. Here are the specific methods for removing car stickers: 1. Adhesive Remover: Auto parts stores sell specialized products for cleaning car stickers, such as adhesive removers. Simply spray it on the sticker, wait five minutes, and then wipe it off with a cloth. 2. High-Pressure Water Gun: Go to a car wash and use a high-pressure water gun to rinse the sticker. Once the sticker softens, clean it thoroughly with tar remover. 3. Lighter: Use a lighter to heat the sticker. The adhesive used for car stickers will usually melt, allowing you to scrape it off slowly. For any remaining residue, it is recommended to use tar remover to clean it off.
7
5
Share

Will there be someone next to me during the Subject 2 driving test?

Non-examinees are not allowed to enter the test area during the Subject 2 driving test. Below is detailed information about the Subject 2 test: 1. Test content: The five assessment items are reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Requirements: Subject 2 requires completion of 26 study hours. Among these, 2 hours are for theoretical knowledge. Therefore, the actual practice time is 24 hours. 3. Score confirmation: The Subject 2 test is taken once, and if the test is failed, one retake is allowed. If the retake is not taken or is still failed, the test is terminated, and the applicant must reschedule the test after ten days.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.