What is the fuel tank capacity of the 2013 Hyundai ix35?

How does a car produce heat without turning on the air conditioning?

When the air conditioning is turned off, the car automatically switches to the external circulation mode to ensure air circulation inside the vehicle. The outside air passes through the engine compartment and becomes heated. Precautions for using the air conditioning include: 1. Turn off the air conditioning before shutting down the engine to avoid increasing the startup load; 2. Avoid prolonged use of the internal circulation mode; 3. Do not arbitrarily adjust the direction of the air conditioning vents; 4. Immediately turn on the internal circulation mode when entering the car in summer. Maintenance methods for the air conditioning system include: 1. Regularly clean the surfaces of the condenser and evaporator; 2. Pay attention to the operation of the compressor; 3. Close the external circulation when there is a lot of dust in the air to reduce pollution of the air filter; 4. Regularly clean the air ducts and replace the air filter to maintain fresh air inside the car.

19

0

Share

Can a broken car charging port be repaired?

If the car charging port is broken, first confirm whether there are issues with the power supply of the charging port, external devices, or charging cables. If the external devices and charging cables are fine (a common issue is a blown fuse in the charging port), simply replace the fuse. If both the wiring and fuse are functioning properly, it is recommended to go to a repair facility to directly replace the charging port, as it is difficult to find replacement parts when disassembling and repairing a car charging port. Car chargers are accessories designed to conveniently charge digital products using the car's power supply anytime, anywhere. These products generally feature overload protection, short-circuit protection, high-voltage input protection, high-temperature protection, and quadruple safety protection functions.

9

0

Share

What does the ECO light on the Buick Excelle dashboard mean?

ECO indicates that the vehicle's eco-driving mode is activated. ECO is an English abbreviation derived from Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco-driving mode and passive eco-driving mode. When the ECO indicator light on the dashboard illuminates, it signifies that the vehicle's eco mode is enabled. Eco mode is categorized into active and passive types. The difference lies in the fact that the active type has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately illuminates, and the vehicle automatically adjusts settings such as throttle opening, transmission shift logic, and air conditioning output power. The passive Eco mode does not have a dedicated button. When the dashboard ECO indicator light turns on, it serves merely as a reminder. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most vehicles employ the active Eco-driving mode, meaning they have a dedicated switch button. Thus, during daily driving, you can activate the Eco mode. However, it is unnecessary to enable Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco mode but also affect the vehicle's power output. Additionally, the Eco mode typically becomes ineffective under the following conditions: When the vehicle speed exceeds 120 kilometers per hour, the system prioritizes speed, causing the Eco mode to deactivate automatically. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes delivering sufficient power to drive the vehicle, and the Eco mode will not function.

9

3

Share

What emission standard does the BMW X5 comply with?

The BMW X5 complies with the Euro VI standard, which is equivalent to China's National VI-A standard and lower than the National VI-B standard. Currently, China has divided the National VI standard into two phases, National VI-A and National VI-B, with plans to implement them uniformly nationwide in 2020 and 2023, respectively. The implementation of the National VI standard will impose stricter requirements on emissions such as carbon monoxide, nitrogen oxides, and hydrocarbons. The BMW X5 is the first four-wheel-drive SUV model under the BMW brand. In terms of body dimensions, it measures 4909mm in length, 1938mm in width, and 1772mm in height. The BMW X5 achieves the level of a four-wheel-drive vehicle in terms of technical equipment and performance, featuring excellent handling sensitivity and stability. It incorporates a series of technologies, including four-wheel braking, automatic stability and traction control, and automatic dynamic stability control.

15

5

Share

How to Avoid Crossing the Line in the Parallel Parking Test for Subject 2?

The methods to avoid crossing the line in the parallel parking test for Subject 2 are: 1. Find the correct distance. When entering the parallel parking test area, locate the parking position accurately and maintain a distance of about 30cm between the right side of the vehicle and the boundary line. A distance that is too large or too small may cause the vehicle to cross the line; 2. Master the timing of steering. The key to passing the parallel parking test lies in observing the reference points and steering accordingly. Steering too early or too late will cause the vehicle to cross the line; 3. Remember the reference points clearly. Parallel parking requires observing more reference points than reversing into a parking space, requiring constant adjustment of the rearview mirrors and coordination with hand movements; 4. Control the speed well. Maintain a slow and steady speed, and avoid stalling the engine during the process.

13

5

Share

What are the steps for changing automatic transmission fluid?

Automatic transmission fluid change steps are: 1. Lift the vehicle, place a large container under the car to catch the used fluid, and use an appropriate screwdriver to remove the transmission inner and outer covers; 2. When most fluid has drained, remove the last oil pan and carefully support it by hand as it still contains a significant amount of fluid; 3. Carefully remove the transmission fluid filter, at which point the solenoid valves controlling gear shifts become clearly visible; 4. Remove the oil pan gasket and clean surrounding residue - tools may be used if gaps aren't thoroughly cleaned; 5. Wipe all cleaned transmission filter components with cotton yarn before reinstalling them one by one; 6. Wipe surfaces of replaced parts dry (avoiding water or oil stains that may cause leaks), install cleaned oil pan and gasket with proper sealing, clean and wipe the filter housing, reinstall cleaned housing, and add manufacturer-recommended fluid.

1

2

Share

What is the fuel tank capacity of the 2013 Hyundai ix35?

How does a car produce heat without turning on the air conditioning?

Can a broken car charging port be repaired?

What does the ECO light on the Buick Excelle dashboard mean?

What emission standard does the BMW X5 comply with?

How to Avoid Crossing the Line in the Parallel Parking Test for Subject 2?

What are the steps for changing automatic transmission fluid?

How to Turn on the Low Beam Headlights of Honda City?

Can the Lynk & Co 03 Use 92 Octane Gasoline?

What is the purpose of tire dynamic balancing?

Why does the car door squeak while driving?