What is the fuel tank capacity of the 2012 Honda City?

1 Answers
MacDeclan
07/29/25 9:00pm
42 liters. Below is the detailed information: Introduction: The Honda City manual specifies that the fuel tank capacity is 42 liters, with a recommended gasoline grade of 92 octane, and it should be used consistently without frequent changes. Notes: The gasoline grade only indicates the octane rating, and the appropriate grade should be selected based on the engine's compression ratio. Always refuel in advance and do not wait until the fuel warning light comes on. The fuel pump is located inside the tank and operates at high temperatures when continuously working. Being submerged in fuel helps cool it effectively. When the fuel light comes on, it means the fuel level is below the pump. Consistently waiting for the light to come on before refueling can shorten the fuel pump's lifespan, and having too little fuel in the tank may damage the pump.
Was this review help?
9
5
Share
More Forum Discussions

Why Does the Inside of Car Windows Frost Over?

Car windows frost over on the inside due to residual heat inside the vehicle after the occupants leave, which causes the temperature of the windows to be higher than the outside temperature, leading to condensation that freezes when it comes into contact with the cold. Methods to prevent the inside of the car windshield from frosting over include: 1. Parking the vehicle in a garage; 2. Covering the car with a car cover or using a large cloth to cover the windshield; 3. Spraying antifreeze on the windshield before parking. Methods to remove ice from the car windshield include: 1. Turning on the car's heater; 2. Using a hard plastic scraper to remove the ice; 3. Using a specialized de-icer; 4. Opening the car doors to ventilate after parking.
4
0
Share

How to Solve High Engine Temperature?

The solutions for high engine temperature are: 1. Check if the radiator coolant is at the normal level; 2. Inspect the radiator, cooling hoses, and all components for leaks; 3. Top up the coolant. Symptoms of high engine temperature include: 1. Decreased engine power; 2. Increased fuel consumption; 3. Accelerated wear of engine components. The causes of high engine temperature are: 1. Coolant level in the radiator is below the minimum mark; 2. Insufficient fan speed; 3. Lack of power in the coolant circulation; 4. Blocked water passages or clogged radiator; 5. Air trapped in the cooling system; 6. Thermostat failure.
17
3
Share

What is the tire model of the Benben mini?

The tire model of the Benben mini is 155/65r13. 155 represents the tire section width of 155 millimeters, 65 represents the tire aspect ratio of 65, which is the percentage of the tire section height divided by the tire width. R stands for radial tire, and 13 represents the rim diameter of 13 inches. Tires are an important component of a car, being the only part that comes into contact with the ground. Tires are crucial for the driving safety and stability of the vehicle. The Benben mini is a small car newly designed by Changan Automobile for its future leapfrog development. In terms of body dimensions, the Benben mini has a length, width, and height of 3520mm, 1570mm, and 1490mm respectively.
6
3
Share

How to Reset the Maintenance Light on a Citroen C-Quatre?

To reset the maintenance light on a Citroen C-Quatre, follow these steps: 1. Turn off the ignition; 2. Press and hold the maintenance mileage reset button; 3. Turn on the ignition, and the odometer will start counting down; 4. When the display shows '0' and the maintenance light turns off, the process is complete. The Citroen C-Quatre has body dimensions of 4588mm in length, 1773mm in width, 1486mm in height, and a wheelbase of 2610mm. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 86 kW at 6000 rpm, paired with a 5-speed manual transmission.
6
5
Share

What are the symptoms of a faulty ignition wire in a car?

Here are the fault phenomena caused by a faulty ignition wire in a car: 1. Unstable engine operation or shaking: For example, reasons such as poor quality or aging of the high-voltage wire can cause this. 2. Single or multiple cylinder misfires or intermittent faults: For example, individual high-voltage wires with quality issues leading to poor conduction or resistance changes may cause this. 3. Abnormal ignition: The engine may experience weak acceleration, hesitation, or poor acceleration; For example, during use, the conductivity of the high-voltage wire weakens, internal resistance increases, resulting in reduced ignition intensity to the spark plug, weak ignition, and incomplete combustion.
17
1
Share

What causes the Hyundai Tucson not to move when shifted into reverse gear?

Modern Tucson does not move when shifted into reverse gear due to damaged internal gears in the automatic transmission or a circuit malfunction in the solenoid valve. Here is some extended information about automatic transmissions: 1. Types of automatic transmissions: Common automotive transmissions include AT (Automatic Transmission), CVT (Continuously Variable Transmission), and DCT (Dual Clutch Transmission, which is divided into dry and wet types). Currently, AT is the most commonly used in passenger cars on the market. 2. Function: The main role of an automatic transmission is to convert the engine's output into a wide range of speed variations delivered to the drive wheels. Understanding the function and principles of the transmission before use can lead to better driving performance.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.