What is the fuel tank capacity of the 2012 Focus in liters?

1 Answers
VanEmmett
07/29/25 2:24pm
The manufacturer's data indicates a fuel tank capacity of 55L. However, to prevent the tank from being completely empty, the fuel gauge hides a portion of the fuel. Therefore, even if the driver drives until the remaining range shows 0 and then refuels, it is impossible to fill up to 55L, with the maximum being around 50L. Types of fuel tanks: Fuel tanks can be divided into two types: open tanks and closed tanks. The tank must have a sufficiently large volume; the suction pipe and return pipe should be inserted below the minimum liquid level to prevent air suction and splashing of the return oil, which can create bubbles. The distance between the suction pipe and return pipe should be as far as possible, and a partition should be installed between them. Design requirements for fuel tanks: To maintain clean oil, the fuel tank should have a sealed cover plate around its perimeter, equipped with an air filter. The bottom of the tank should be at least 150mm above the ground. Adequate attention should be paid to the anti-corrosion treatment of the inner surface of the tank.
Was this review help?
18
4
Share
More Forum Discussions

Will a Faulty Motorcycle Rectifier Burn Out the Battery?

If a motorcycle's rectifier is damaged, it may cause the charging voltage to become too high, which could potentially puncture the battery, leading to battery damage, swelling, or even bursting. Function of the Rectifier: The motorcycle rectifier's role is to convert the vehicle's alternating current (AC) into direct current (DC) for use by electrical devices. The current required by motorcycle electrical devices is generated by the magneto. Without passing through the rectifier, the voltage would fluctuate with the engine's speed, being directly proportional to it. Electrical devices cannot withstand this type of current and are easily damaged. Methods to Determine Rectifier Failure: When accelerating to increase engine speed, if the voltage remains unchanged, it is normal. If the voltage suddenly spikes or drops significantly, the rectifier is not functioning; After starting the engine, disconnect the positive terminal of the battery. If the engine does not stall but the circuit voltage exceeds 14.5V, or even reaches above 18V, then the rectifier is damaged; Using a digital multimeter to directly measure the rectifier can determine whether it is effectively rectifying.
6
2
Share

What is the speed of the Autonomous Rail Rapid Transit (ART) in kilometers per hour?

ART has a speed of 70 kilometers per hour. ART Train: The Autonomous Rail Rapid Transit (ART) system, abbreviated as ART train, is a new type of transportation vehicle designed by China Railway Siyuan Survey and Design Group Co., Ltd. and developed by CRRC Zhuzhou Institute Co., Ltd. (hereinafter referred to as "CRRC Zhuzhou Institute"). It has a designed maximum speed of 70 kilometers per hour. However, since it does not rely on steel rails for operation, the construction cycle of a single operation line only takes one year, enabling rapid deployment. Types: The ART train also features zero emissions and no pollution, similar to light rail and subway systems, and supports multiple power supply methods. By adopting the flexible marshalling mode of high-speed trains, the ART train can adjust its capacity according to changes in passenger flow. For example, with a standard 3-car marshalling, the train can carry over 300 passengers, and with a 5-car marshalling, it can carry over 500 passengers. This effectively addresses the limitation of small passenger capacity in ordinary buses and significantly improves transportation capacity.
6
5
Share

Does the New BMW 3 Series Automatically Close Windows When Locked?

When the new BMW 3 Series is locked, it automatically closes the windows. The vehicle features an automatic window-closing function upon locking, which requires holding down the lock button for the windows to automatically roll up. Definition of One-Touch Window Control: One-touch window control refers to a system where car window glass can be adjusted to the desired position with a single button press. Generally, vehicles equipped with one-touch window control have two settings for the window adjustment switch. The first button position functions similarly to a standard electric window. The second position allows the window to fully open or close automatically with a single press and release. To ensure the longevity of the window lift motor, all four windows are typically equipped with a thermal protection function. Functions of One-Touch Window Control: If the window is repeatedly operated for raising and lowering within a short period, the motor will enter a thermal protection state and cease the operation. During the automatic window-closing process, if an object is detected between the glass and the window frame, the window will automatically stop rising and return to its initial position. Vehicles with one-touch window control also come with an anti-pinch feature. Do not attempt to test this function with any part of the body.
14
1
Share

What is the principle of BYD DM-i super hybrid technology?

DM-i super hybrid technology is designed based on the high-safety Blade Battery and high-performance high-power motor. It primarily relies on the high-power efficient motor for driving, while the gasoline engine's main role is to generate electricity within its efficient rpm range and directly drive the vehicle when appropriate. By altering the traditional hybrid design that is predominantly engine-driven, it significantly reduces fuel consumption. Additional information: 1. Architecture: DM-i super hybrid is based on a large-capacity battery and high-power motor. During driving, the vehicle relies on the high-power motor for propulsion, while the gasoline engine primarily functions to charge the battery. It directly engages only when additional power is needed, and even then, it works in tandem with the motor to reduce load. This hybrid technology differs from traditional hybrid systems that heavily depend on the engine, thereby achieving more effective fuel efficiency. 2. When the battery is sufficiently charged: When a DM-i model has sufficient battery charge, it operates like a pure electric vehicle, with the motor providing adequate power for various road conditions. When the battery is low, the DM-i model autonomously determines whether to use electricity, fuel, or a combination of both based on system conditions.
12
3
Share

What is the fuel consumption of BYD DM-i when the battery is depleted?

The fuel consumption of BYD Tang DM-i when the battery is depleted is 5.3 liters per 100 kilometers. Fuel consumption when the battery is depleted refers to the fuel consumption of a car when it relies solely on fuel for power without any electrical energy. If the car runs out of electricity, it can only be driven by the engine consuming fuel. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. If the air conditioning cooling effect is poor, it will increase the fan speed and lower the temperature to achieve a cooling effect. 2. Frequent sudden braking: Frequent sudden braking is a major reason for high fuel consumption in cars. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid setting the air conditioning too high in small-displacement cars: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after getting in. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside the car. Wait until the car has cooled down moderately before turning on the air conditioning.
5
3
Share

Why Does the Car Roof Lining Fabric Fall Off?

Car roof lining fabric falls off due to the aging of the sponge backing. Here are specific measures for dealing with a falling car roof lining: 1. Edge adhesive failure: The edge adhesive failure is most likely caused by the aging of the sponge backing, leading to edge detachment. This issue is relatively easy to fix. Purchase a bottle of specialized car adhesive or glue product, spray the glue along the edge after peeling it open, let it dry for 3-5 minutes, and then press it back into place. 2. Middle section sagging: If the middle section of the roof lining sags or falls off, and it's inconvenient to remove, you can opt for clip repairs. Choose clips that match the color of the lining. The downside is that it may not look as aesthetically pleasing, but it's a practical solution. 3. Large area detachment: In this case, the entire roof lining needs to be removed. Take off the old lining fabric, clean off the aged sponge from the surface, prepare a new piece of roof lining fabric along with specialized roof adhesive, apply the adhesive to both sides, let it dry for 3-5 minutes before bonding, and finally reinstall the roof lining. However, for better repair results, it's advisable to visit a repair shop.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.