What is the fuel tank capacity of the 2012 Focus?

1 Answers
LeAliyah
07/30/25 3:14am
2012 Focus models all have a fuel tank capacity of 55 liters. The vehicle is equipped with a 1.6L naturally aspirated engine, and all variants come with either a dry dual-clutch transmission (DCT) or manual transmission (MT). All models feature front-engine, front-wheel-drive configuration. Starting from the 2021 model year, the Focus's fuel tank capacity has been slightly reduced. Both the 2021 Focus Hatchback EcoBoost180 Automatic Trend Edition and the 2021 Focus Sedan 1.5L Manual Trend Edition have a fuel tank capacity of 53 liters. During actual refueling, the amount of fuel may exceed the nominal capacity. This occurs because automakers measure tank capacity from the tank bottom to the safe fill level, leaving additional space between the safe fill level and the tank opening. This safety space allows for fuel expansion during temperature increases without causing overflow. If fuel is filled up to the tank opening, the actual refueled amount will exceed the nominal capacity. To check remaining fuel, drivers can observe the fuel gauge on the right side of the instrument cluster, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel level, while nearing F shows sufficient fuel.
Was this review help?
17
1
Share
More Forum Discussions

What is the difference between a manual-automatic transmission and a dual-clutch transmission?

The differences between a manual-automatic transmission and a dual-clutch transmission are as follows: 1. In terms of fuel economy: The dual-clutch transmission is equivalent to two automatic clutches, and is generally more fuel-efficient. 2. In terms of power performance: The manual-automatic transmission is developed based on the traditional automatic transmission, with a relatively slower response speed. Due to engine protection considerations, its power performance is relatively weaker. 3. In terms of cost: The manual-automatic transmission is generally used in some mid-to-high-end cars, with relatively faster gear shifting. The dual-clutch transmission is usually used in some high-end models and sports cars, with very expensive components.
13
5
Share

What is the tire pressure for a sedan?

The tire pressure for a sedan is between 2.3 and 2.8 bar. Manufacturers provide recommended standard tire pressures, which vary by brand. During vehicle development and production, manufacturers conduct extensive research and testing to determine the optimal tire pressure that ensures safe and suitable driving conditions. Hazards of overinflated tires: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Steering wheel vibration and misalignment, decreasing driving comfort; 3. Accelerated wear on the central tread pattern, shortening tire lifespan; 4. Increased vehicle vibration, indirectly affecting the longevity of other components.
3
2
Share

Is it necessary to display the compulsory insurance decal on the vehicle?

Compulsory insurance decals must be displayed on the front windshield of the vehicle. Relevant details are as follows: 1. Penalty: According to the 'Regulations on Compulsory Insurance for Motor Vehicle Traffic Accident Liability', motor vehicles driven on public roads must display insurance decals. Traffic police authorities have the right to detain vehicles without decals and impose fines ranging from 20 to 200 yuan. 2. Definition: Compulsory Traffic Accident Liability Insurance (CTALI), commonly known as 'compulsory insurance', is a mandatory liability insurance where insurance companies compensate for personal injuries, deaths, and property losses caused by insured motor vehicles in traffic accidents within specified liability limits. This is a compulsory insurance system implemented by national law. According to the 'Road Traffic Safety Law', both the vehicle inspection compliance decal and compulsory insurance decal must be neatly displayed in the upper right corner of the front windshield without obstructing the driver's view.
7
4
Share

What documents are required for vehicle inspection in Beijing?

When conducting a vehicle inspection in Beijing, the following documents must be presented: 1. Vehicle documents: Original vehicle registration certificate. 2. Personal identification: Original ID card of the person conducting the inspection. 3. Related materials: Original valid insurance policy (for compulsory traffic insurance, only the copy retained by the traffic management department is required). Conditions for qualifying for the 6-year exemption from annual inspection are as follows: 1. Non-commercial vehicles: The vehicle must be non-commercial. 2. Passenger capacity: The vehicle's approved passenger capacity must be 6 or fewer. 3. Vehicle type specified on the registration certificate: Sedan (mini, compact, midsize, full-size), mini ordinary passenger vehicle, mini off-road passenger vehicle, compact ordinary passenger vehicle, compact off-road passenger vehicle, compact special passenger vehicle. 4. Registration date: The registration date must be after September 1, 2010.
6
1
Share

How to File an Insurance Claim for a Self-Inflicted Car Accident?

There are two scenarios for filing an insurance claim for a self-inflicted car accident: 1. Only compulsory traffic insurance is purchased: If the vehicle only has compulsory traffic insurance, you cannot file a claim and will need to cover the repair costs yourself. 2. Commercial insurance with vehicle damage coverage is purchased: You can directly contact the insurance company, which will assess the damage and arrange for vehicle repairs. Important notes for those with vehicle damage coverage: 1. Do not move the vehicle arbitrarily: After an accident, avoid moving the vehicle or having someone else drive it to prevent affecting the normal claims process. 2. Wait for the insurance company to assess the damage: Only after the insurance company has photographed and assessed the damage can the vehicle be sent for repairs. Do not conduct private inspections or determine the vehicle's condition; everything must wait until the insurance company's personnel arrive.
15
2
Share

How to Deal with High Transmission Fuse Temperature?

To address excessive transmission temperature, first pull the vehicle over to allow the transmission temperature to gradually decrease. Check if the transmission's radiator fan is functioning properly and inspect whether the coolant and transmission fluid are at adequate levels. After these checks, once the transmission temperature returns to normal and the dashboard warning light turns off, you may continue driving. The causes of transmission overheating are as follows: 1. High engine and coolant temperature: Prolonged engine overload can increase coolant temperature, thereby affecting transmission cooling; additionally, insufficient coolant in the radiator reduces the cooling system's effectiveness, leading to transmission overheating. 2. Transmission clutch slippage: Clutch slippage generates additional heat, raising transmission temperature and degrading transmission fluid quality, which increases transmission wear. 3. Thermostat sticking: If the transmission's thermostat sticks, the fluid cannot circulate into the cooling system, preventing heat dissipation. 4. Insufficient transmission fluid: Low transmission fluid levels increase gearshift jerkiness and reduce cooling efficiency, causing temperature rise and potential internal component damage. 5. Clogged radiator grille: A blocked grille prevents timely heat dissipation, leading to increased transmission temperature.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.