What is the fuel tank capacity of the 10th-generation Civic?

1 Answers
DiCharles
07/30/25 3:28am
The 10th-generation Civic has a 47-liter fuel tank and requires 92-octane (formerly 93-octane) gasoline. The fuel tank consists of a tank body and a fuel cap, used for storing gasoline. The quantity and capacity vary depending on the vehicle model. Ordinary cars typically have only one fuel tank, while off-road vehicles often have two. The Civic offers multiple models to cater to the preferences of consumers in different countries, including a three-door hatchback, a hardtop coupe, a hybrid version, and a five-door sedan. In terms of body dimensions, the Civic measures 4649mm in length, 1800mm in width, and 1416mm in height, with a wheelbase of 2700mm.
Was this review help?
5
5
Share
More Forum Discussions

What is the 0-100 km/h acceleration time of the Tank 300?

The 0-100 km/h acceleration time of the Tank 300 is 9.5 seconds. More information about the Tank 300 is as follows: 1. Powertrain: The Tank 300 is equipped with a 2.0T direct-injection turbocharged gasoline engine, delivering a maximum power of 167kW and a peak torque of 387N·m. It is paired with a ZF 8-speed automatic transmission, ensuring superior obstacle-crossing capability, hill-climbing performance, and off-road traction. 2. Features: The Tank 300 comes with intelligent full-speed ACC cruise control, intelligent lane keeping assist, latest 9.3-generation ESP system, intelligent traffic sign recognition, roll movement intervention (RMI), front and rear integrated OPW side curtain airbags, and CLT dynamic locking dual pretension seatbelts.
7
3
Share

Can the Audi S3 perform a launch start?

The Audi S3 is capable of performing a launch start. A launch start utilizes the transmission to adjust the engine speed to the output range of maximum torque, allowing the engine to deliver maximum torque at the moment of takeoff. Relevant information about the Audi S3 is as follows: 1. Dimensions: The Audi S3 is a compact 4-door, 5-seater sedan with the following body dimensions: length 4504mm, width 1816mm, height 1415mm, and a wheelbase of 2630mm. 2. Powertrain: The Audi S3 is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 228 kW and a maximum torque of 400 Nm. It features a front-engine, all-wheel-drive layout, with a front suspension using MacPherson struts and a rear suspension employing a multi-link independent setup.
8
0
Share

What is the maximum wading depth of the Haval H6?

The maximum wading depth of the Haval H6 is 90 centimeters, and it is best not to exceed half of the tire height. Relevant information about wading depth is as follows: 1. Maximum wading depth: This is one of the important indicators for evaluating a vehicle's off-road capability, referring to the deepest water body the vehicle can pass through safely. 2. Unprepared wading depth: This refers to the depth at which the vehicle, without any modifications, can wade without affecting the normal operation of its mechanical components. Relevant information about the Haval H6 is as follows: 1. Configuration: Equipped with the Hi-Life intelligent system Zhi Xuan version, it can start quickly and operate stably and reliably in both high-temperature and extreme cold environments. It features a deeply customized Android system with stronger openness and expandability, boasting a vast ecosystem of third-party applications. Integrated with Baidu's security module, it ensures safety. Functions include intelligent voice interaction, Baidu Maps, QQ Music, iQIYI online video, in-car WiFi hotspot, remote control, smart home interconnection, aggregated payment, mini-programs, and emergency rescue. 2. Powertrain: Equipped with a 1.5GDIT/2.0GDIT + wet 7DCT powertrain. The 1.5GDIT engine adopts world-leading CVVL continuous variable valve lift technology, integrated exhaust manifold in the cylinder head, and other technologies, delivering a maximum power of 124kW and a peak torque of 285N•m at 1400rpm. The 2.0GDIT direct-injection turbocharged engine features an electronically controlled wastegate twin-scroll turbocharger, integrated exhaust manifold, 350bar fuel injection system, and other advanced technologies, producing a maximum power of 165kW and a peak torque of 385N•m.
18
0
Share

Does a New Car Save Fuel After the Break-in Period?

After the break-in period of a new car, the fuel consumption will decrease, but the reduction won't be significant. The specific fuel consumption depends on the vehicle model. Below is some information about car fuel consumption: 1. Fuel consumption levels: Generally, for household economical cars, the fuel consumption per 100 kilometers is approximately 5L for 1.0L engines, 7L for 1.3L, 10L for 1.6L, and 12L for 2.0L engines. However, fuel consumption is a complex factor influenced by the car's performance, road conditions, and the driver's skills. 2. Methods to save fuel: The engine's temperature directly affects fuel efficiency. Both excessively high and low temperatures will increase fuel consumption. The engine's operating water temperature should be maintained between 80°C and 90°C. Preheating the engine during cold starts can significantly save fuel. 3. Regular maintenance: The intake system must be kept clean and unobstructed. The air filter should be frequently cleaned, the tightness of all connecting belts should be appropriate, tire pressure should not be too low, and brake shoe gaps should be regularly adjusted to avoid friction.
6
2
Share

What Causes Oil Leakage Under the Car?

When a vehicle experiences oil leakage the owner should not take it lightly, as oil leakage poses a risk of fire. The larger the leakage and the longer it persists, the higher the chance of an explosion. Therefore, vehicle owners must pay close attention. There are many reasons for oil leakage in cars, with the most common being the following five: First, gasket damage: Many car owners overlook this seemingly insignificant component. Gaskets between various parts primarily serve to prevent leaks and provide sealing. If the gasket is poorly manufactured or improperly installed, it will not function as intended. Over time, gaskets may also wear out, but many owners fail to recognize their importance and do not replace them when servicing other components, only realizing the need when oil leakage occurs. Second, loose nuts: Nuts are among the most common components in a car. If nuts are too loose or too tight, they can cause oil leakage. Therefore, when a vehicle leaks oil, the owner should first check the tightness of the nuts. Overly loose nuts can lead to gasket seepage, while overly tight nuts may cause metal protrusions around the screw holes or stripped threads, both of which can result in leakage. Third, oil seal failure: This is the primary cause of car oil leakage. Simply put, an oil seal is a mechanical component designed to contain oil. Over time, the rubber in oil seals can degrade, losing elasticity and leading to leaks. Additionally, improper installation or inadequate sealing of the oil seal, causing misalignment between the oil well and the seal's opening, can also result in leakage. Fourth, wheel hub oil sling: Wheel hub oil sling can be caused by various factors, primarily due to excessive lubricating grease and rising temperatures during driving. Other causes include incorrect oil seal installation, poor-quality or aged seals, frequent braking, and loose axle nuts. Fifth, preventing engine ventilation system blockage: This issue is less common but should not be ignored. A blocked engine ventilation system increases piston resistance and fuel consumption. Moreover, the pressure difference between the inside and outside can cause leaks at weak sealing points, so owners should regularly inspect the ventilation system.
11
3
Share

What are the techniques for B2 curve driving?

Straighten the vehicle, engage first gear, and align the front of the car to drive straight between the two lines. When the left front corner of the car touches the right line, turn the steering wheel one full turn to the left, keeping the body about 15 centimeters away from the left line. When the center point of the front touches the left line, turn the steering wheel back to the right to straighten the car. When the right front corner of the car touches the front line, turn the steering wheel one full turn to the right, keeping the body about 15 centimeters away from the right line and moving forward. Here is more information about the driver's license: 1. Introduction: The full name is the People's Republic of China Motor Vehicle Driver's License, also known as the 'driver's license.' It is a license required for motor vehicle drivers under the laws of the People's Republic of China. 2. Regulatory Authority: The Traffic Management Bureau of the Ministry of Public Security of the People's Republic of China. 3. Applicable Scope: Mainland China. 4. Examination Subjects: Includes four items: traffic laws and related knowledge, field driving, road driving, and theoretical tests on safe and civilized driving knowledge. 5. Categories: The driver's license categories in China include Class A, Class B, Class C, Class D, Class E, Class F, Class M, Class N, and Class P.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.