What is the fuel tank capacity of FAW Besturn X40?

1 Answers
DeMaddox
07/29/25 4:31pm
FAW Besturn X40 has a fuel tank capacity of 50 liters, which is the officially announced data. The recommended fuel grade for FAW Besturn X40 is 92 octane, with a fuel consumption of 6.7-6.9L per 100 kilometers. A full tank can provide a driving range of 724-746 kilometers. During daily driving, it is necessary to constantly monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. In actual refueling situations, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This extra space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
17
5
Share
More Forum Discussions

What is the fuel consumption of a 2.0L car?

Most models equipped with a 2.0L naturally aspirated engine have a fuel consumption of around 8.5L/100KM. If it's a turbocharged engine, the fuel consumption will be even higher. A car's fuel consumption is not only related to the vehicle itself but also to the driver's habits and road conditions. Poor driving habits and frequent driving on congested roads can increase fuel consumption. When driving in traffic jams, the car often needs to stop and go. Starting from a standstill requires significant acceleration, which demands more power from the engine and consequently increases fuel consumption. When the engine is idling, it continues to consume fuel without increasing the car's mileage, which also leads to higher fuel consumption per 100 kilometers. To improve fuel efficiency, it is recommended to maintain a steady speed while driving, avoid sudden acceleration and deceleration, and unnecessary overtaking. Regular maintenance of your car is also essential to keep it in optimal condition.
1
2
Share

What is the normal tire pressure display for the Buick GL6?

The normal tire pressure display for the Buick GL6 is between 2.4 and 2.5 bar. Strictly speaking, tire pressure refers to the air pressure inside the tire. Tire pressure is the blood pressure of a car, and its level plays a crucial role in the car's performance and power. The Buick GL6 is a model under SAIC General Motors, with body dimensions of 4692mm in length, 1794mm in width, and 1626mm in height, and a wheelbase of 2796mm. In terms of appearance, the Buick GL6 features a winged chrome grille that runs through the headlight design, forming a double-layer combination of winged LED headlights; a floating roof, hidden D-pillar, and unique integrated streamlined windows extend from the A-pillar to the rear, running through the tail, giving the overall shape a very smooth look.
15
0
Share

How many types of engines does the BMW X5 use?

The BMW X5 uses two types of engines: a 2.0-liter turbocharged engine and a 3.0-liter turbocharged engine. The BMW X5 is a mid-to-large-sized SUV under the BMW brand, with a body length, width, and height of 4930mm, 2004mm, and 1776mm respectively, and a wheelbase of 2975mm. The 2.0-liter turbocharged engine of the BMW X5 delivers 265 horsepower and a maximum torque of 400 Nm. This engine can output maximum power at 5000 to 6000 rpm and maximum torque at 1550 to 4500 rpm. The 3.0-liter turbocharged engine delivers 340 horsepower and a maximum torque of 450 Nm. This engine can output maximum power at 5500 to 6500 rpm and maximum torque at 1500 to 5200 rpm. The BMW X5 features a double-wishbone independent front suspension and a multi-link independent rear suspension, providing excellent handling sensitivity and stability. It incorporates a series of innovative technologies, including four-wheel braking, ASC+T, and DSCⅢ.
13
1
Share

What Items Are Typically Replaced During Car Maintenance?

During routine car maintenance, the following items are typically replaced: 1. Engine oil and oil filter: These are usually replaced at every service interval. Engine oils are generally categorized into three types: mineral oil, semi-synthetic oil, and fully synthetic oil, each with different replacement cycles. Mineral oil should be replaced every 5,000 kilometers or six months, semi-synthetic oil every 7,000 kilometers or six months, and fully synthetic oil every 10,000 kilometers or annually. 2. Coolant: Automotive coolant not only prevents freezing but also helps dissipate heat generated by the engine during operation. In cold winter temperatures, coolant protects the engine from low-temperature damage. It is generally recommended to replace coolant every three years or 50,000 kilometers. 3. Cabin air filter: This filters the air to ensure clean airflow from the air conditioning system. Typically, it should be replaced every 1-2 years. 4. Brake fluid: It is advisable to replace brake fluid approximately every two years to prevent braking abnormalities and ensure driving safety. 5. Transmission fluid: Transmission fluid has a longer replacement cycle, usually recommended every five years or after exceeding 60,000 kilometers.
12
1
Share

What is the reason why the Audi A8 remote one-touch window lift cannot be used?

The reason why the Audi A8 remote one-touch window lift cannot be used is due to damage to the window lift motor, poor contact in the electrical control wiring harness, motor overheating, or excessive resistance in the glass guide channel. Definition of one-touch window lift: One-touch window lift refers to a system where the car window glass can be controlled to rise or lower into position with a single press of a button. Cars equipped with one-touch window lift have a two-stage window lift control switch, with the first stage functioning similarly to a regular electric window. Function of one-touch window lift: Generally, mid-to-high-end car models are equipped with one-touch window lift functionality, primarily for the convenience of drivers and passengers, and to prevent the driver from being distracted by operating the windows, thereby improving safety. One-touch window lift systems usually come with an "anti-pinch" feature to avoid the danger of pinching fingers.
19
5
Share

How to set the automatic locking function for the Magotan car?

Method to set the automatic locking function for the Magotan car: Set it in the car menu on the central control screen, where you can find the automatic locking function. Locate the "Auto Lock" option and check the box, enabling the automatic locking feature while driving. The purpose of the automatic locking function is anti-theft, allowing the doors to lock quickly after starting to drive, providing a certain level of security. The Magotan is a model under FAW-Volkswagen, with body dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, and a wheelbase of 2812mm. In terms of appearance, starting from the headlights, the Magotan features two "sharp edges" that form waist lines complementing the body lines, creating a dual-waistline design. Combined with the prominent wheel arch lines and the chrome anti-scratch strip moved downward to the bottom, the side profile of the car appears more stable visually.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.