What is the fuel tank capacity of FAW Besturn X40?

2 Answers
DiAustin
07/29/25 4:44am
FAW Besturn X40 has a fuel tank capacity of 50 liters. The fuel tank is a container for storing fuel in a vehicle, specifically designed to hold hydraulic oil or fluid in hydraulic systems. Fuel tanks can be categorized into open-type and closed-type. To maintain oil cleanliness, the tank should have a sealed cover with an air filter installed on it. The Besturn X40 is based on FAW Group's mature A-segment car technology, with body dimensions of 4310mm in length, 1780mm in width, and 1680mm in height, and a wheelbase of 2600mm. In terms of appearance, the Besturn X40 features a swift and rugged design style, with an overall posture full of lightness. The hexagonal front grille, inheriting the Besturn gene, offers strong recognition. The sleek, streamlined headlights exhibit a distinctive personality, full of inspiration, appearing both intelligent and dynamic.
Was this review help?
14
0
Share
Declan
08/12/25 8:25am
The FAW Besturn X40 has a standard fuel tank capacity of 52 liters, which I find very practical when driving this car. If you're an urban commuter, a full tank can last for 650-750 kilometers, with an average fuel consumption of around 7L/100km. One tank is basically enough for a long trip. It's best to refuel when the low fuel light comes on, and don't wait too long to avoid running on empty, which can affect the engine. Personally, I like to check the fuel level in advance. The size of the fuel tank directly affects convenience when traveling, which is a relief for frequent travelers like me. While 52 liters isn't oversized, it's sufficient and fairly standard compared to other SUVs. Being able to fill up in one go saves a lot of time, especially during peak hours when you don't have to queue frequently.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What is the 0-100 km/h acceleration time of the Toyota Reiz?

According to official data, the Toyota Reiz comes with two engine displacements: 2.5L and 3.0L. The 2.5L model accelerates from 0-100 km/h in 9 seconds, while the 3.0L model achieves it in 7.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The 2.5L model accelerates from 0-100 km/h in 9 seconds with a maximum torque of 236 Nm, while the 3.0L model does it in 7.8 seconds with a maximum torque of 293 Nm. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Toyota Reiz is equipped with a 6-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. The 2.5L model accelerates from 0-100 km/h in 9 seconds with a power-to-weight ratio of 120 Hp/T, while the 3.0L model achieves it in 7.8 seconds with a power-to-weight ratio of 141 Hp/T.
20
5
Share

What is the English lettering for Santana?

The English name for Santana is SANTANA. It is a brand car produced by Volkswagen in California, USA, and was introduced to China from Germany in 1983. The first Santana was assembled at the Shanghai Automobile Factory. The Santana models include: the original Santana (Pu Sang), Santana 2000, Santana 3000, and Santana Vista. There is no Santana 4000. The original Santana was based on the Volkswagen Passat B4 from Germany, the Santana 2000 was developed by Volkswagen Brazil, the Santana 3000 was an improved version of the Santana 2000, and the Santana Vista was an improved version of the Santana 3000. Relevant information about Santana is introduced as follows: The new Volkswagen Santana is equipped with two engines: the Volkswagen EA211-DLX and EA211-DFL, both with a displacement of 1.5L and naturally aspirated intake. EA211-DLX version: The Volkswagen EA211-DLX engine has a maximum output power of 81 kW, a maximum torque of 150 Nm, a top speed of 185 km/h, and a 0-100 km/h acceleration time of 11.4 seconds. EA211-DFL version: The Volkswagen EA211-DFL engine has a maximum output power of 82 kW, a maximum torque of 145 Nm, a top speed of 185 km/h, and a 0-100 km/h acceleration time of 12.6 seconds.
19
3
Share

What are the differences between the Baojun RS3 and 510?

Baojun RS3 and 510 differ in appearance and configuration. The RS3 is equipped with an electronic parking system, while the 510 has a manual handbrake; the RS3 has a non-full-size spare tire, whereas the 510 has a full-size spare tire; the RS3 features full-speed adaptive cruise control, while the 510 has standard cruise control; the RS3 has a 7-inch color display screen, whereas the 510 has a monochrome display. More details are as follows: 1. In terms of appearance, the RS3 can be considered an upgraded version of the 510. The RS3's large-sized air intake and split-type headlights create a front face that not only gives the car high recognition but also makes it more stylish when paired with a uniquely designed bumper. In terms of appearance, the 510 is not as impressive as the RS3. In terms of size, although both cars belong to the small SUV category, the RS3 has a length of 4300mm, while the 510 is only 4220mm. 2. In terms of power, the 510 only offers a 1.5L naturally aspirated engine, while the RS3 provides two engine options for consumers: a 1.5L and a 1.2T engine, with maximum power outputs of 105Ps and 131Ps, respectively. Although these power figures are modest, they are sufficient for most urban roads. 3. In terms of interior, compared to the traditional design of the 510, the RS3 incorporates more convenient car networking features, allowing users to remotely locate the car, start the vehicle, and activate the air conditioning via a smartphone. Additionally, the voice control system supports WeChat messaging via voice commands.
15
1
Share

Should a Damaged Mercedes-Benz Generator Be Repaired or Replaced?

Mercedes-Benz generator damage requires replacement. The following is an introduction to engine-related content: 1. Energy Conversion: An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. 2. Device: The term engine applies both to power-generating devices and to the entire machine including the power unit (e.g., gasoline engines, aircraft engines). The engine was first developed in England, so the concept of the engine also originates from English, with its original meaning referring to 'a mechanical device that generates power.'
5
0
Share

What is the layer of cotton laid under the car called?

The layer of felt is called chassis soundproofing cotton. Here is some relevant information: 1. Introduction to soundproofing cotton: Soundproofing cotton has excellent thermal insulation properties. When applied inside the car's engine hood, it effectively prevents the engine's high temperature from directly transferring to the hood, thereby protecting the hood's surface paint and avoiding fogging on the hood during rainy days, which can affect visibility. 2. Functions: After soundproofing the doors, the hollow cavities inside the doors are effectively filled, making the sound of closing the doors softer. After soundproofing the front and rear hoods, firewall, and floor, the engine's loud valve noise is filtered out. During low-speed driving, most of the tire and road noise is suppressed, with some room for further improvement at higher speeds. The vehicle's stability is significantly increased, and the shock absorption and cushioning performance are noticeably enhanced. It also reduces and effectively alleviates metal fatigue in the chassis, extending the vehicle's lifespan.
20
4
Share

What Does It Mean When a Car Shows Positive and Negative Poles?

The dashboard displaying battery positive and negative poles indicates that the generator is not functioning and requires immediate inspection. Common causes for generator failure include a loose or detached generator belt and a loose engine control unit connector. Loose or detached generator belt. If this fault occurs after rapid acceleration, the generator belt should be inspected for detachment. If the issue stems from a detached belt, the functionality of the belt tensioner must be thoroughly checked, as a properly functioning tensioner maintains belt tightness. If any problems are detected, promptly replace the belt or tensioner. Loose engine control unit connector. Another reason for generator failure is a loose control unit connector. Therefore, it is essential to inspect the connector's connection and related pins for looseness. If there are issues with the connector's fixation, the connector housing can be replaced separately. If the related pins are loose, they can also be replaced individually to avoid excessive costs.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.