What is the fuel tank capacity of Dongfeng Xiaokang C32 in liters?

What causes the popping sound from the exhaust pipe at idle?

Possible causes include fuel line A, fuel line blockage, poor flow, rail pressure, etc. Below is an introduction related to car idle conditions: 1. The function of car idle: Idle is an operating condition of a car, referring to the engine running in neutral gear. The engine speed during idle is called the idle speed. The idle speed can be adjusted by changing the throttle opening size, etc. Idle means the engine "produces power without doing work." When the engine is running, if the accelerator pedal is fully released, the engine is in an idle state. 2. Reasons for unstable idle: Direct causes refer to mechanical parts being dirty, worn, or incorrectly installed, leading to changes in cylinder power, resulting in an imbalance in power among cylinders and causing unstable engine idle. Indirect causes refer to abnormalities in the engine's electronic control system, leading to poor combustion of the air-fuel mixture, making it difficult to balance the power among cylinders and causing unstable engine idle.

13

0

Share

What are the damages of installing a turbocharger to the engine?

After turbocharging, the pressure and temperature during engine operation significantly increase, resulting in a shorter lifespan compared to naturally aspirated engines of the same displacement. Additionally, mechanical and lubrication performance will be affected. The advantage is that it increases the engine's air intake, thereby enhancing the engine's power and torque, allowing for greater power output after turbocharging. After installing a turbocharger, an engine's maximum power can increase by 40% or even more compared to when it was not equipped with a turbocharger. Below are some details about turbocharged engines: 1. Working Principle: Generally, turbocharging is indeed suitable for long-distance driving, similar to naturally aspirated engines, because long-distance driving involves higher and more consistent speeds, keeping the turbocharger engaged for extended periods, which can be more fuel-efficient compared to naturally aspirated engines. The main difference between turbocharged and naturally aspirated engines lies in the presence of the turbocharger. For a given engine displacement, the most effective way to increase output power is to supply more fuel for combustion. 2. Precautions: Improper driving can severely impact the lifespan of both the turbocharger and the engine.

19

4

Share

What is the difference between driving with glasses and without glasses?

There is actually not much difference between driving with glasses and without glasses, as long as you pay attention to safety. Here are some driving precautions: 1. Slow down and observe when turning: Develop the habit of slowing down and observing the situation in the non-motorized vehicle lane and pedestrian lane when turning (especially when intersecting with them). Proceed slowly, which applies both in urban and rural areas. Actively yield to electric bikes in the non-motorized lane and pedestrians on the sidewalk. When making a right turn in the city, give way to pedestrians and electric bikes on the crosswalk and proceed slowly only after confirming there is no risk of accidents. 2. Slow down and look left and right at intersections: Develop the habit of looking left and right (while slowing down) when approaching an intersection, regardless of whether there is a traffic light or if your lane has a green light. Observe the traffic on the cross street and proceed only after confirming there are no vehicles rushing through. Also, be mindful of electric bikes, as their small size makes them easy to overlook.

13

3

Share

Does Wearing Contact Lenses Affect Driving Practice?

Wearing glasses or not actually makes little difference. Here are some driving precautions: 1. Slow down and observe when turning: Develop the habit of slowing down significantly when making turns (especially at intersections with bicycle lanes or pedestrian crossings)! Carefully observe the situation in bicycle lanes and pedestrian crossings, then proceed slowly. This applies to both urban and suburban driving. Actively yield to electric bikes in bicycle lanes and pedestrians on sidewalks. When making right turns in urban areas, give way to pedestrians and electric bikes at crosswalks, only proceeding slowly after confirming no potential hazards. 2. Slow down and look both ways at intersections: Cultivate the habit of looking left and right (while slowing down) when approaching intersections, regardless of traffic lights or whether your lane has a green light. Observe the traffic situation on the crossing roads, only accelerating through the intersection after confirming no vehicles are running red lights (also watch out for electric bikes as their small size makes them easy to overlook).

13

2

Share

What are the requirements for the third-phase traffic duty station?

The main task is to assist police officers in guiding citizens to comply with traffic regulations. For example, dissuading non-motor vehicles from running red lights, stopping beyond the line, going against traffic, or driving in non-designated lanes; discouraging pedestrians from running red lights or not using sidewalks. Stages: The three-hour persuasion activity is divided into three stages. In the first stage, trainees are required to stand at the intersection for one hour. The second stage allows trainees to rest and learn basic traffic knowledge. In the third stage, trainees continue to stand at the intersection for another hour. They must wear reflective vests uniformly, hold a small yellow triangular flag labeled "Traffic Persuader," and carry a whistle, directing on-site traffic under the command of traffic police. Duty Station: If a trainee leaves the post without approval from a police officer or auxiliary police, fails to dress as required or carry persuasion equipment, performs duties carelessly, or finds someone to substitute for the persuasion activity, they will be deemed as failing. The trainee must redo the duty station until they pass.

13

0

Share

What Causes the Handbrake of a Sedan to Fail to Hold?

Introduction to the reasons why the handbrake fails to hold: 1. Braking effect: The ABS activates, but the car still shows no obvious braking effect, and the braking distance significantly increases. 2. ABS not activated: The wheels do not lock up, the ABS does not activate, and the car rolls forward. The first issue likely stems from the tires, possibly due to severe tire wear, leading to a reduced static friction coefficient, which makes the tires prone to locking up and causes the ABS to intervene too early, failing to generate effective braking force and compromising safety. Solution: 1. Replace the tires: It is recommended to switch to a slightly larger tire size for a significantly improved braking effect. The second issue likely originates from the braking system itself. 2. Replace the brake pads: If a noticeable friction sound is heard during braking, it indicates severely worn brake pads that should be replaced immediately. If no sound is heard, the issue may lie with a malfunctioning brake pump, preventing the brake piston from working effectively. In such cases, it is advisable to promptly visit a repair shop to service the brake assembly.

15

2

Share

What is the fuel tank capacity of Dongfeng Xiaokang C32 in liters?

What causes the popping sound from the exhaust pipe at idle?

What are the damages of installing a turbocharger to the engine?

What is the difference between driving with glasses and without glasses?

Does Wearing Contact Lenses Affect Driving Practice?

What are the requirements for the third-phase traffic duty station?

What Causes the Handbrake of a Sedan to Fail to Hold?

How Often Should Castrol Magnatec Engine Oil Be Changed?

What is the new energy vehicle with several vertical bars?

How Many Training Hours Are Required for Subject 3 Before Scheduling the Exam?

Can Non-Operational Vehicles Purchase Operational Insurance?