What is the fuel tank capacity of Dongfeng Fengshen A60 in liters?

Abnormal Noise When Shifting Gears in Automatic Transmission?

Abnormal noise when shifting gears in an automatic transmission is generally caused by the following reasons: 1. The vehicle was not completely stopped before shifting. When parking, the vehicle should be brought to a complete stop before shifting the gear lever from D (Drive) to P (Park). If the vehicle is shifted to P before it is fully stopped, the P gear lock hook inside the transmission will strike the gear, producing a clunking sound. This operation can cause wear or even breakage of the lock hook, and in severe cases, may lead to transmission failure. 2. Incorrect operation sequence when parking on a slope. For automatic transmission vehicles, the P gear relies on the lock hook engaging the gear to keep the vehicle stationary. When parking on a slope, the handbrake should be engaged first before shifting to P, allowing the handbrake to bear the vehicle's sliding force. If P is engaged before the handbrake, the entire sliding force of the vehicle will be borne by the P gear lock hook, putting tension on the lock hook and gear. In this case, shifting from P to other gears will produce a noise.

9

5

Share

How Many Kilowatt-Hours Does It Take to Fully Charge a Pure Electric Vehicle?

This depends on the vehicle's battery capacity. Different new energy vehicles have varying battery capacities, so the amount of electricity required for a full charge cannot be generalized. Below are the relevant explanations: 1. Electric vehicles are divided into AC electric vehicles and DC electric vehicles. 2. Electric vehicles typically use batteries as their energy source, converting electrical energy into mechanical energy through components such as controllers and motors to drive the vehicle. 3. Electric vehicles align with the national trend of energy conservation and environmental protection, playing a significant role in China's environmental conservation and protection efforts. 4. Over a decade ago, electric vehicles were developed as a green industry in China, growing at an annual rate of 30%. 5. Due to their obvious advantages, electric vehicles have become popular among urban low- and middle-income groups. In recent years, the electric vehicle market has maintained rapid growth, with new energy vehicles achieving mass production, gradually bringing the technology of the electric vehicle industry to international advanced levels.

3

5

Share

How to Deal with the Sour and Musty Smell in Car Air Conditioning?

Solutions for the sour and musty smell in air conditioning: 1. Replace the car air conditioning's air filter element, ensuring regular cleaning and replacement. 2. Clean the ventilation ducts, preferably when replacing the air filter element. 3. Clean the blower, ideally performed by professionals to avoid damage. 4. Clean the car interior, paying more attention to the hygiene inside the car. 5. Turn off the cooler before parking and dry the evaporator and ventilation ducts. These measures can effectively prevent the issue and extend the evaporator's service life. Note: A strong sour and musty smell in the car air conditioning is often caused by problems in the air conditioning system, such as severe contamination of the air filter element, excessive humidity inside the evaporator box, or accumulation of dust and impurities in the air conditioning vents.

2

4

Share

How to Apply Car Window Tint Film?

Detailed steps for applying car window tint film: 1. Before applying the film, first ensure that the working environment meets the requirements of being dry and dust-free. Otherwise, dust and debris entering during the process will affect the film application. It is recommended to wash the car before applying the film. 2. Cover necessary parts of the vehicle. Both the interior and exterior should be protected with covers. If specialized materials are not available, cling film can be used as an alternative. 3. Clean the car glass where the film will be applied. Pay special attention to the top and edges of the glass, then dry it thoroughly. 4. Next, cut the film to size, ensuring it matches the dimensions of the glass. Spray a small amount of water on the glass surface, then adhere a plastic film of a certain thickness to the window. Trace the edges to create a template, which can slightly exceed the glass size. 5. When applying film to the front and rear windshields, a heat gun is required for shaping. Place the cut film on the exterior side of the glass and use a heat gun to shape it. This step is crucial and prone to errors, as the temperature of the heat gun and shaping technique require precision. Improper use can easily lead to the film becoming scorched or the glass cracking. 6. After shaping the film, proceed with the actual application. Spray clean water or window film installation solution on the interior side of the glass, then remove the innermost plastic layer of the film and apply it to the interior glass, adjusting it to the optimal position. 7. Spray a small amount of water or window film installation solution on the surface of the film, then use a long triangular plastic squeegee to remove excess water. If such a tool is not available, unused hard cards (such as credit cards or membership cards) can serve as substitutes. 8. After removing the water, check for bubbles, secure adhesion, wrinkles, or scratches between the film and the glass. If no issues are found, finally clean the edges of the glass with a towel to remove any remaining water.

3

2

Share

How Many Meters Should the Following Distance Be?

The following distance in meters varies under different conditions: 1. When a motor vehicle is driving on the highway, the following distance should be more than 50 meters or more than 100 meters depending on the speed. 2. When a motor vehicle is driving on the highway at a speed exceeding 100 kilometers per hour, it should maintain a distance of more than 100 meters from the vehicle in front in the same lane. 3. When the speed is below 100 kilometers per hour, the distance from the vehicle in front in the same lane can be appropriately reduced, but the minimum distance should not be less than 50 meters. 4. When a motor vehicle is driving on the highway under low visibility weather conditions such as fog, rain, snow, dust, or hail, if the visibility is less than 200 meters, turn on the fog lights, low beam lights, position lights, and front and rear position lights. The speed should not exceed 60 kilometers per hour, and the distance from the vehicle in front in the same lane should be more than 100 meters. 5. When the visibility is less than 100 meters, turn on the fog lights, low beam lights, position lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 40 kilometers per hour, and the distance from the vehicle in front in the same lane should be more than 50 meters. 6. When the visibility is less than 50 meters, turn on the fog lights, low beam lights, position lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 20 kilometers per hour.

13

0

Share

Under which brand is Acura?

Acura is a luxury brand under Honda Motor, primarily targeting the North American market with relatively limited influence in China. The dimensions of an Acura vehicle are 4496mm in length, 1840mm in width, and 1615mm in height, with a wheelbase of 2660mm. In terms of exterior design, Acura adopts a family-style design language, featuring the latest headlight designs on both sides with four prominent light beads and an L-shaped design motif. For powertrain, the Acura MDX is equipped with a 3.5L V6 engine paired with a 10-speed automatic transmission, while the Type S model comes with a 3.0T V6 engine and the SH-AWD four-wheel-drive system.

1

5

Share

What is the fuel tank capacity of Dongfeng Fengshen A60 in liters?

Abnormal Noise When Shifting Gears in Automatic Transmission?

How Many Kilowatt-Hours Does It Take to Fully Charge a Pure Electric Vehicle?

How to Deal with the Sour and Musty Smell in Car Air Conditioning?

How to Apply Car Window Tint Film?

How Many Meters Should the Following Distance Be?

Under which brand is Acura?

Should You Turn on the A/C When Using the Car Heater?

Can You Start the Engine If Water Enters the Exhaust Pipe?

What does the yellow triangle with an exclamation mark in a car mean?

How to Reinstall a Car Seat After Removal?