What is the fuel tank capacity of Changan Ruixing M80 in liters?

2 Answers
DeMadison
07/24/25 7:11pm
Changan Ruixing M80 has a fuel tank capacity of 40 liters, which is the officially announced data. Owners who have purchased the Changan Ruixing M80 can also check this information on the vehicle's configuration sheet. The recommended fuel grade for Changan Ruixing M80 is 92 octane, with a fuel consumption of 7.5L per 100 kilometers. A full tank can provide a driving range of approximately 533km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the manufacturer's marked fuel tank capacity is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the marked tank capacity.
Was this review help?
6
4
Share
GrantDella
08/11/25 10:39am
The fuel tank capacity of the Changan Ruixing M80 is generally around 60 liters, which is quite practical for commercial vehicles. I've driven this model and found that filling up the tank is just enough for two days of cargo transportation needs. Avoid always filling it to the brim, as this can easily cause fuel pump issues, especially in summer when high temperatures cause fuel expansion and overflow. Experience tells me that filling up to about 80% is the safest, and it also prevents impurities from settling at the bottom of the tank. Before long trips, check the fuel system to ensure there are no leaks or blockages. Additionally, using regular 92-octane gasoline is sufficient—it saves money and avoids unnecessary hassle. Overall, this vehicle's range is quite reliable, and regular maintenance of the fueling system ensures peace of mind.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

How to Replace the Battery in a New BMW Car Key?

Here is the method to replace the battery when a new BMW car key runs out of power: 1. First, press the side button and pull out the mechanical key. 2. Insert it into the groove on the back cover and gently push to pop the cover open. 3. Replace it with the new battery you have prepared. 4. Close the back cover and insert the mechanical key to complete the battery replacement. Extension: BMW is a German luxury car brand headquartered in Munich, Bavaria, Germany. BMW's vehicle series include the i, X, Z, and pure number models (1, 2, 3, 4, 5, 6, 7, 8 series), as well as the M series (BMW's official high-performance modification division) based on improvements to these series.
8
2
Share

What is the fuel tank capacity of the Baojun 530?

Baojun 530 has a fuel tank capacity of 52L. The standard fuel tank capacity indicated in the vehicle specifications is not actually the maximum capacity. According to international standards, L (liter) is used as the unit of measurement for automobile fuel tank capacity, and different countries and regions have corresponding standards for fuel tank capacity. Here are some precautions for refueling: 1. When the low fuel warning light comes on, there is still a certain amount of fuel remaining. Generally, this is the time to refuel, but it is best to refuel before the warning light comes on. Many vehicle manuals recommend refueling when the fuel gauge pointer reaches the one-quarter mark, which is to protect the fuel pump. 2. Nowadays, gasoline vehicles are equipped with electric fuel pumps and electronic fuel level sensors, which need to be immersed in gasoline for heat dissipation. If there is too little gasoline, the fuel pump will not be immersed, greatly affecting heat dissipation. Poor heat dissipation can affect the lifespan of the fuel pump and even cause it to burn out. 3. If the vehicle's fuel tank has not been cleaned for a long time, the accumulation of impurities at the bottom of the tank can easily cause fuel line blockages when the fuel level is low. Additionally, a low fuel level increases the workload of the fuel pump and affects the cooling of the pump's internal rotor. It may also impact the oxygen sensor in the exhaust system.
10
0
Share

Where is the turn signal switch on the Crown car?

The operation method can be summarized into four words: up, right, down, left. The Crown turn signal switch is located on the light switch assembly on the left side of the steering wheel. Pushing it upward activates the right turn signal, pushing it downward activates the left turn signal, and returning it to the middle turns it off. Turn off the hazard lights before using the turn signals; this helps quickly identify if the turn signals are malfunctioning. The Crown turn signal switch is located on the light switch assembly on the left side of the steering wheel. Pushing it upward activates the right turn signal, pushing it downward activates the left turn signal, and returning it to the middle turns it off.
1
0
Share

Which Volkswagen model is Sagitar?

Sagitar is the compact sedan Sagitar produced by FAW-Volkswagen. Basic information about this model: Engine displacement options: Available in 4 variants: 1.2T, 1.4T, 1.6L, and 2.0T. Transmission options include dual-clutch, manual, and automatic transmissions. Maximum engine power: 147.0kW, maximum horsepower: 200PS, maximum torque: 280.0Nm. Sagitar is the English name for the Sagitar model. Interior design: The interior layout follows Volkswagen's latest design language, with the center console tilted towards the driver's side for easier operation. The cabin features high-quality materials, including soft-touch plastic on the dashboard, leather-wrapped door panels and steering wheel, providing a more premium feel.
16
2
Share

What are the three yielding principles for turning vehicles to yield to straight-going vehicles?

The three yielding principles for turning vehicles to yield to straight-going vehicles are: yield to vehicles coming from the right, turning vehicles yield to straight-going vehicles, and right-turning vehicles yield to left-turning vehicles in opposite directions. The Road Traffic Safety Law of the People's Republic of China stipulates: turning motor vehicles must yield to straight-going motor vehicles, meaning left-turning vehicles should yield to straight-going vehicles. When motor vehicles pass through intersections without traffic lights or traffic police directing traffic: 1. If there are traffic signs or markings, yield to the party with the right of way; 2. If there are no traffic signs or markings, stop and observe before entering the intersection, yielding to vehicles coming from the right; 3. Turning motor vehicles yield to straight-going motor vehicles; 4. Right-turning motor vehicles yield to left-turning vehicles in opposite directions.
7
5
Share

Can motorcycles carry passengers?

Motorcycles can carry passengers, but they must comply with legal regulations. Requirements for carrying passengers on motorcycles: The vehicle must have a valid registration certificate, the rider must possess a valid driver's license, the vehicle should preferably have compulsory insurance, and both the rider and passenger must wear helmets. Precautions for carrying passengers on motorcycles: After carrying a passenger, the front and rear weight distribution of the motorcycle changes significantly, with the front becoming lighter and the rear heavier, which makes the handlebars feel lighter. Slow-speed handling becomes less stable, braking requires more effort, acceleration is slower, and other negative factors come into play. Since the vehicle becomes heavier with a passenger and braking needs to be gentler, it is essential to allow for a longer braking distance. When braking, first apply the rear brake to slow down slightly, then use the front brake to stabilize the rear of the motorcycle, reducing the extent of front fork compression and minimizing the passenger's forward lean.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.