What is the fuel tank capacity of a Xiali in liters?

2 Answers
DelilahDella
07/25/25 12:20pm
The fuel tank capacity of a Xiali is 37 liters, as officially announced. Owners who have purchased a Xiali can also check this information on the vehicle's configuration sheet. The recommended fuel grade for Xiali is 92 octane, with a fuel consumption of 6.1L per 100 kilometers. A full tank can cover a distance of approximately 607 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
15
1
Share
DiAnthony
08/11/25 8:18pm
I used to drive an old generation Charade hatchback with a fuel tank capacity of about 37 liters. On highways, a full tank could cover over 400 kilometers, and in the city, refueling once a week was sufficient. However, the newer sedan version has a slightly larger tank. My friend's N5 model has a 45-liter tank, which is indeed more convenient for long trips. Don't wait until the fuel light comes on to refuel, as the fuel pump relies on gasoline for cooling and can easily burn out. Just fill up until the pump clicks off; overfilling can cause leaks into the charcoal canister, which is particularly troublesome to repair.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What Causes Abnormal Noise at the Moment of Car Ignition?

This is caused by excessively low engine oil temperature and low ambient temperature. When the oil temperature is too low, the various components inside the engine lack lubrication, leading to increased friction between parts, which results in some abnormal noises. This is a normal phenomenon. Below is relevant information about engine oil: 1. Engine oil is referred to as the lifeblood of the engine. Inside the engine, it not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat. Without engine oil, the engine cannot operate properly. 2. During engine operation, the oil forms a thin film on the surfaces of various components, preventing direct contact and friction between them. If components directly contact and rub against each other, it will accelerate engine wear and generate a large amount of heat instantaneously, which is highly detrimental to the engine. 3. Over time, the performance of engine oil degrades, so it needs to be replaced regularly. Prolonged failure to change the oil will increase engine wear. During each oil change, the oil filter should also be replaced. The oil filter is used to clean the oil; without it, the oil will become dirty after some use, affecting the engine's lubrication and heat dissipation.
7
0
Share

Where is the cabin air filter located in a Toyota Corolla?

Toyota Corolla's cabin air filter is located inside the glove compartment on the passenger side. The cabin air filter, commonly known as the pollen filter, serves to purify the air entering the vehicle interior from outside, improving air cleanliness. It typically filters out impurities in the air, including microscopic particles, pollen, bacteria, industrial exhaust, and dust. Here are some details about cabin air filters: 1. Cabin air filters are generally divided into two types: standard cabin air filters and activated carbon series cabin air filters. Standard cabin air filters are usually made from a specific eco-friendly filtration material that is processed and folded, often appearing as a single white layer. Activated carbon series cabin air filters are made from non-woven fabric on both sides, with tiny activated carbon particles sandwiched in between to form an activated carbon filter cloth, which is then further processed into a cabin air filter. 2. The recommended replacement interval for cabin air filters is typically when the vehicle has traveled 8,000-10,000 kilometers, but this can vary depending on the driving environment. If the environment experiences significant dry-wet contrasts, consistently dry climates, or high levels of wind and sand, the filter should be replaced earlier.
7
0
Share

What is the tire model of the Beidou Star?

The tire model specification is 165/65R13. The first number 165 indicates the tire width is 165MM, 65 represents the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 13 denotes the rim diameter is 13 inches. The middle letters or symbols have special meanings: "X" indicates a high-pressure tire; "R" and "Z" indicate radial tires; "-" indicates a low-pressure tire. Maximum speed is 156km/h, and fuel consumption per 100km is 5.1L. In addition to the model, the tire also displays the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Shows the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".
14
2
Share

What are the body dimensions of the Cadillac XTS?

The length, width, and height dimensions of the Cadillac XTS are 5103mm/1852mm/1502mm, which are official data. The length of the Cadillac XTS refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The turbocharged engine of the Cadillac XTS has a maximum power of 198kW and a maximum torque of 353 Nm. The maximum power speed of this engine is 5300 rpm, and the maximum torque speed ranges from 2000 to 5000 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head. This engine is paired with a 6-speed automatic manual transmission. There are relevant national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, in the national standard, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the national regulation stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
2
2
Share

How to Connect a Car Horn Relay?

First, disconnect the non-ground wire from the horn and connect it to the terminal labeled 'button' on the relay, leaving the horn's ground wire untouched. Then, use a wire to connect the terminal labeled 'battery' on the relay to the positive terminal of the battery. Next, connect the terminal labeled 'horn' on the relay to another terminal on the horn using another wire, and ground the relay housing. Below is some relevant information about horn relays: 1. A relay is an electrical control device that establishes an interactive relationship between the control system (also known as the input circuit) and the controlled system (also known as the output circuit). It is commonly used in automated control circuits and essentially functions as an 'automatic switch' that uses a small current to control the operation of a larger current. Therefore, it plays roles such as automatic regulation, safety protection, and circuit switching in electrical circuits. 2. A car electric horn produces sound through the vibration of a metal diaphragm. The car electric horn consists of an iron core, a magnetic coil, contacts, an armature, and a diaphragm. When the driver presses the horn switch, current flows through the contacts to the coil, generating a magnetic force that pulls down the armature, forcing the diaphragm to move. The movement of the armature causes the contacts to open, interrupting the current and causing the magnetic force of the coil to disappear. The diaphragm, along with the armature, returns to its original position under its own elasticity and the action of a spring plate, closing the contacts and reconnecting the circuit. Current then flows through the contacts to the coil again, generating magnetic force and repeating the above actions. This cycle repeats, causing the diaphragm to vibrate continuously and produce sound. The resonator, rigidly connected to the diaphragm, ensures smooth vibration and produces a more pleasant sound (based on the principle of electromagnetism).
9
1
Share

How to reset the maintenance light on the new H6?

Here is the method to reset the maintenance light on the Haval H6: 1. Insert the key and keep the engine off. 2. Press the reset button once, and switch and select the system that needs adjustment according to the display. 3. Turn the ignition switch to the second gear and hold the reset button for about 3 seconds. 4. The multifunction display on the instrument panel will show the relevant icon, indicating that the maintenance light has been successfully reset. Here is some related information about the maintenance light: 1. The maintenance light is a device that reminds the owner to perform vehicle maintenance in a timely manner. 2. After performing vehicle maintenance, the maintenance light can be reset to zero, allowing the system to recalculate the next maintenance time or mileage.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.