What is the fuel tank capacity of a smart car?

What kind of tires does the Touareg use?

The Touareg uses two tire brands: Continental and Hankook. The Touareg is equipped with three different tire sizes, with specifications of 245/60R18, 255/55R19, and 255/50R20. Relevant information about car tires is as follows: 1. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling. 2. Tires are rubber products, and rubber products will age if left unused for a long time. Most tires have a shelf life of three years when unused. If the tires have been in storage for more than three years, they should not be purchased. 3. Tires are one of the most important components of a car. Their main functions include: supporting the entire weight of the vehicle and bearing the car's load; transmitting traction and braking torque to ensure the adhesion between the wheels and the road; reducing and absorbing vibrations and impacts during driving to prevent severe vibrations and premature damage to car components; adapting to the high-speed performance of the vehicle and reducing driving noise; ensuring driving safety, handling stability, comfort, and energy efficiency.

3

4

Share

Which parts should not be sprayed with chassis armor?

Generally, chassis armor should not be sprayed on areas such as the engine oil pan, transmission housing, exhaust pipe, wiring harnesses on the chassis, steering shaft, shock absorbers, etc. Additionally, the brakes and suspension should be wrapped with newspaper, and the exhaust pipe and tires must be completely removed before spraying. Since chassis armor can melt when exposed to high temperatures, posing safety hazards, parts of the vehicle that generate high temperatures during operation should not be sprayed with chassis armor. Before spraying chassis armor, the vehicle's chassis should be thoroughly cleaned. Use a lift to raise the car to remove the wheels and inner fender protective panels. Then, use a high-pressure water gun to rinse the chassis, removing any adhered dirt and sand. For areas with severe dirt buildup, a wire brush can be used to scrape it off until the metal base of the chassis is exposed.

8

5

Share

What car brand is represented by three slashes?

Three slashes represent Lifan Motors. Lifan Motors made a grand appearance at the 2014 Beijing International Auto Show with its first mid-to-high-end sedan, the Lifan 820. The Lifan 820 not only enriched Lifan's product lineup but also elevated the brand into the B-segment market. More details about the Lifan 820 are as follows: 1. The Lifan 820 currently has five models available, featuring two engine displacements (1.8L and 2.4L) and two transmission options (manual and automatic). The engine delivers a maximum power of 123.0 kW, a maximum horsepower of 167 PS, and a maximum torque of 226.0 N·m. 2. Positioned as a mid-size sedan, the Lifan 820 is the brand's new flagship model, marking another step upward in Lifan's product line. 3. In terms of exterior design, the Lifan 820 features a hexagonal grille with four evenly spaced chrome strips, sharp yet composed headlights equipped with automatic lighting and LED daytime running lights. The LED daytime running lights on either side of the lower air intake enhance the car's front fascia. 4. The straight waistline extending from the fender to the rear adds visual appeal to the side profile. The rear design is equally impressive, with strong layering and LED elements incorporated into the taillights.

18

0

Share

How to reset the maintenance light on the new 16smart?

The method to reset the maintenance light on the new 16smart is as follows: 1. Turn on the key and press the reset button at the bottom left corner twice consecutively, usually holding it for about 4 seconds. 2. Turn off the key, hold the reset button, and then turn on the ignition. 3. At this point, the car's maintenance light will reset, allowing you to reconfigure it for the next maintenance. Information about the maintenance light is as follows: 1. The maintenance light is a reminder function set by the manufacturer to prompt the owner to perform maintenance at certain mileage or time intervals, displayed in the form of an instrument or screen message or indicator light. 2. Resetting the maintenance light means clearing the reminder information after completing the maintenance, which is essentially a reset of the information.

6

3

Share

How to Use a Multimeter to Measure Car Battery Drain?

Follow these steps to use a multimeter to measure car battery drain: 1. Select the correct range: The multimeter has ranges for measuring voltage, resistance, and current. To measure car battery drain, set the multimeter to the current measurement range. 2. Choose the appropriate range: When measuring current, start with the highest range and gradually decrease to find the suitable range. If the range is too small, it may damage the multimeter. Typically, for cars, select a range around 10 amperes. 3. Open the hood of the car you want to test, turn off all electrical devices, and lock the doors. (For vehicles with remote keys, use the remote to lock the car.) 4. Use the appropriate wrench to disconnect the negative terminal of the battery. Then, connect the red probe of the multimeter to the car's ground wire and the black probe to the battery's negative terminal. 5. Wait for 30 seconds and read the value on the multimeter. Since cars have multiple electrical devices, a dark current below 50 milliamperes is considered normal. If the reading exceeds 50 milliamperes, it indicates a potential battery drain issue.

8

4

Share

Can an automatic car be started in P gear?

An automatic car can be started in P gear. Starting the engine in P gear and then passing through R gear without stopping will not cause damage to the transmission. Therefore, in daily driving, you can start the engine in P gear as long as you ensure not to stay in R gear, which will not cause additional harm to the transmission. Relevant information about automatic cars is as follows: 1. The gear symbols of an automatic transmission are P, R, N, D. In P gear, the automatic transmission is in neutral, and a mechanical lever locks the output shaft to prevent the car from rolling. Of course, the gear lever can only be placed in P gear when the vehicle is completely stopped. 2. R (REVERSE) - Reverse gear can only be engaged or disengaged when the vehicle is completely stopped; otherwise, it will cause early wear of the automatic transmission. 3. If you need to push or tow the vehicle, you must use N gear. When towing the vehicle, the towing speed should not exceed 50km/h, and the towing distance should not exceed 50km; otherwise, it will damage the planetary gear mechanism of the automatic transmission.

11

4

Share

What is the fuel tank capacity of a smart car?

What kind of tires does the Touareg use?

Which parts should not be sprayed with chassis armor?

What car brand is represented by three slashes?

How to reset the maintenance light on the new 16smart?

How to Use a Multimeter to Measure Car Battery Drain?

Can an automatic car be started in P gear?

How to Use Seat Memory?

What is the lifespan of car bearings?

What Are the Benefits of Wheel Alignment?

Is the BMW 3 Series a Three-Cylinder Engine?