What is the fuel tank capacity of a car in liters?

2 Answers
AdelynDella
07/24/25 6:40am
Generally, the fuel tank capacity of small cars is 35-45 liters, while that of medium-sized cars is 55-75 liters. After filling up the tank, the car can usually travel about 500 kilometers. Depending on the engine displacement of the car, a higher fuel consumption means a larger tank, and a lower fuel consumption means a smaller tank. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by car manufacturers is the volume from the bottom of the tank to the safety level. There is still some space from the safety level to the tank opening, which is reserved to allow the fuel inside the tank to expand when the temperature rises, preventing overflow from the tank's safety space. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. If the car owner wants to know the remaining fuel level in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient.
Was this review help?
12
1
Share
RiverMarie
08/11/25 2:24am
I've been driving for over ten years, and fuel tank capacity varies from person to person. My car is an ordinary family sedan with a capacity of about 50 liters, but there's a big difference between models. Small economy cars like the Toyota Vios may have around 40 liters, allowing you to drive over 400 kilometers on a full tank. Mid-size SUVs like the Haval H6 require 60 liters or more, capable of running 500-600 kilometers. When choosing a car, I pay attention to the fuel tank size because it directly affects driving habits—smaller capacity means frequent refueling, requiring careful planning of stops on highways to avoid running out of fuel; larger capacity saves time but slightly increases fuel consumption due to the added weight. Personally, I prefer to refill when the fuel gauge shows half left to prevent the fuel pump from overheating and getting damaged. When you get a new car, always check the manual or the label on the fuel tank cap for accurate data—don’t just rely on the salesperson’s pitch. Nowadays, eco-friendly cars have smaller capacities, but practicality still depends on individual needs. I recommend comparing brand specifications before buying to find the right balance for your travel needs—don’t just focus on big or small.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What are the differences between Dongfeng Honda Inspire and Accord?

The differences between Dongfeng Honda Inspire and Accord are: 1. Different body length and height: The length of Dongfeng Honda Inspire is 4910mm and the height is 1450mm; the length of Accord is 4893mm and the height is 1449mm. 2. Different fuel tank capacity: The fuel tank capacity of Dongfeng Honda Inspire is 48L; the fuel tank capacity of Accord is 48.5L. 3. Different curb weight: The curb weight of Dongfeng Honda Inspire is 1574kg; the curb weight of Accord is 1619kg. 4. Different tire specifications: The tire specification of Dongfeng Honda Inspire is 225/50R17; the tire specification of Accord is 235/45R18.
12
3
Share

What does it mean when the tire pressure monitoring system alerts an abnormality?

Tire pressure monitoring system alerting an abnormality indicates that the air pressure in the four tires is outside the normal range. The tire pressure warning will be triggered if the tires are underinflated due to slow leaks or punctures, or if the tire pressure is too high. The functions of the tire pressure monitoring system are: 1. To prevent accidents; 2. To extend the service life of the tires; 3. To reduce wear on the suspension system. The tire pressure monitoring system automatically monitors the tire pressure in real-time while the car is in motion and alerts the driver to leaks or low pressure to ensure driving safety. The working principle of the tire pressure monitoring system is: an internal sensor is installed on the tire hub, which includes a bridge-type electronic pressure sensing device that detects air pressure, converts the pressure signal into an electrical signal, and transmits the signal via a wireless transmitter.
15
3
Share

Why Does an Automatic Transmission Car's Brake Make Abnormal Noises?

Automatic transmission brake abnormal noises can be caused by: 1. Rust on the brake disc or brake pads; 2. New brake pads; 3. Excessive wear of the brake disc and brake pads; 4. Incorrect installation or mismatched model of brake pads; 5. Use of low-quality or overly hard brake pads; 6. Abnormal brake caliper or lack of brake fluid; 7. Presence of foreign objects between the brake drum or disc and the shoe. The function of the brake is to reduce speed or bring the vehicle to a stop. Its working principle involves converting the kinetic energy of the moving vehicle into heat energy through friction between the brake pads and the brake drum, as well as between the tires and the ground, thereby slowing down or stopping the car.
8
5
Share

What Causes the Noise When Wiper Blades Rub Against the Windshield?

The reasons for the noise when wiper blades rub against the windshield are: 1. The wiper blades have aged and hardened; 2. There is foreign matter between the wiper blades and the windshield; 3. The linkage mechanism is deformed or there is an issue with the motor; 4. Problems with the intermittent relay; 5. The wiper arms may also produce noise if they move too fast, too slow, continuously, or if their angle is incorrect. Steps to replace wiper blades: 1. Lift the wiper arm; 2. Press the clip underneath to remove the wiper blade; 3. Take off the wiper blade; 4. Pry up the front end of the middle clip; 5. Insert the new wiper blade into the middle clip, pull it tight by hand, and once you hear a click, the replacement is complete.
7
4
Share

Which country does Borgward belong to?

Borgward is a Chinese automobile brand. The models under Borgward include: Borgward BX7, Borgward BX7T, Borgward BX5, Borgward BX6, Borgward BXi7, etc. Taking the 2020 Borgward BX5 as an example, its body dimensions are: length 4490mm, width 1877mm, height 1675mm, with a wheelbase of 2685mm, a minimum ground clearance of 186mm, a fuel tank capacity of 60 liters, and a curb weight of 1525kg. The 2020 Borgward BX5 is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.
20
1
Share

Where is the car VIN code located?

Car VIN codes can be found in: 1. The left side of the dashboard; 2. The lower left side of the windshield; 3. On the vehicle's nameplate; 4. On the body at the upper part of the right front shock absorber; 5. In the trunk area; 6. On the door hinge pillar, door lock pillar, or one of the pillars where the door lock pillar connects to the door edge. The car VIN code consists of 17 characters and includes information about the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. The functions of the car VIN code are: 1. To confirm the vehicle's identity; 2. For traffic violation inquiries; 3. To check the vehicle's batch; 4. To accurately locate parts.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.