What is the fuel tank capacity of a BMW in liters?

What transmission does the Golf 6 use?

The Golf 6 uses a total of three transmissions, which are a 6-speed automatic transmission, a 7-speed dual-clutch transmission, and a 5-speed manual transmission. The following are the specific details of the Golf 6: 1. The Golf 6 is equipped with two engines, one is a 1.6-liter naturally aspirated engine, and the other is a 1.4-liter turbocharged engine. 2. The 1.6-liter naturally aspirated engine has a maximum power of 81kW, a maximum torque of 155 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 3800 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 6-speed automatic transmission or a 5-speed manual transmission. 3. The 1.4-liter turbocharged engine has a maximum power of 96kW, a maximum torque of 225 Nm, a maximum power speed of 5000 to 6000 rpm, and a maximum torque speed of 1500 to 3500 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 7-speed dual-clutch transmission or a 5-speed manual transmission.

15

3

Share

Why is the car throttle response sluggish?

The reasons for sluggish throttle response in a car are as follows: 1. Use of low-quality gasoline, leading to incomplete combustion. Many car owners, in order to save money, refuel at unofficial gas stations where the gasoline contains more impurities and is often mixed with water. This results in lower fuel calorific value and reduced thermal efficiency, naturally causing sluggish throttle response. Over time, this can also lead to carbon buildup, damaging the engine and reducing its lifespan. 2. The ignition system is not functioning well or accurately, causing unstable voltage output and leading to inconsistent ignition. The most common issue is with the spark plugs. For example, severe carbon buildup on the spark plugs, insufficient ignition voltage, or reaching the end of their lifespan. Depending on the situation, the spark plugs can be cleaned or replaced. 3. Clogged intake system. A clogged intake system increases the engine's intake resistance, reduces air content, and leads to incomplete fuel combustion, naturally reducing power and causing sluggish throttle response. Generally, cleaning the throttle body is the solution. 4. Fuel injection failure. For example, clogged fuel injectors or damaged injectors leading to poor fuel injection and deteriorated atomization effects.

18

3

Share

Where to Place the Automotive First Aid Kit?

Models equipped with automotive first aid kits typically place them in the trunk, usually near the spare tire or next to the fire extinguishers on both sides. The automotive first aid kit is a package containing medical supplies and emergency equipment, primarily used for self-rescue in the event of a traffic accident. As of June 2019, there are no specific regulations in China mandating that vehicles must be equipped with first aid kits, but some cities have included it as one of the compulsory requirements. Additional Information: Automotive first aid kits generally include triangular bandages, elastic head covers, emergency blankets, buckle-type tourniquets, medical gloves, hemostatic pads, disposable instant cold packs, adhesive bandages, iodine swabs, isolation masks, motion sickness medication, gauze, etc. The contents of the first aid kit may vary slightly depending on the vehicle model. Precautions to take after a traffic accident: 1. Stay calm and composed. 2. Perform self-rescue immediately and call emergency numbers such as 120 or 119. 3. Cut off the vehicle's power supply. 4. Protect the accident scene.

18

2

Share

What Causes the Engine Abnormal Noise in BMW 523li?

Inappropriate engine oil, especially with excessively high viscosity, can lead to insufficient lubrication of the engine, resulting in friction-induced abnormal noise. Engine Classification: External combustion engines, meaning their fuel burns outside the engine, were invented in 1816 by R. Stirling of Scotland, hence also known as Stirling engines. These engines convert the thermal energy generated from combustion into kinetic energy. The steam engine improved by Watt is a typical example of an external combustion engine. When a large amount of coal burns to generate heat, it heats water into a significant volume of steam, creating high pressure. This high pressure then drives mechanical work, completing the conversion of thermal energy into kinetic energy. Internal combustion engines, or reciprocating piston engines, differ significantly from external combustion engines in that their fuel burns inside them. There is a wide variety of internal combustion engines, with common gasoline and diesel engines being typical examples. Engine Displacement: Engine displacement is the total volume swept by all the cylinders in an engine, usually measured in liters (L). The cylinder displacement refers to the volume of gas swept by the piston from the top dead center to the bottom dead center, also known as single-cylinder displacement, which depends on the cylinder bore and piston stroke. Engine displacement is a crucial parameter, more representative of engine size than cylinder bore and number, and many engine indicators are closely related to displacement. Generally, the larger the displacement, the greater the engine's output power.

18

5

Share

How many times a year should a car be inspected after 15 years?

Vehicles over 15 years old must undergo two inspections per year. Annual inspections can promptly identify any issues with the vehicle, allowing the owner to stay informed about the vehicle's condition and carry out necessary repairs. It is crucial for older vehicles to undergo inspections on time and not to forget. Moreover, vehicles that do not comply with the inspection regulations are not permitted on the road. Additional Information: According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law": Motor vehicles must undergo safety technical inspections according to the following intervals from the date of registration: 1. Passenger vehicles for commercial use must be inspected once a year within the first 5 years; after 5 years, once every 6 months. 2. Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first 10 years; after 10 years, once every 6 months. 3. Small and mini non-commercial passenger vehicles must be inspected once every 2 years within the first 6 years; after 6 years, once a year; after 15 years, once every 6 months. The procedure for an out-of-town delegated inspection requires the owner to first apply to the original registration location before the inspection can proceed. Additionally, an application must be submitted annually to the vehicle management office of the original registration location.

6

3

Share

Can the Audi A3 be modified with a one-key start?

The Audi A3 can be modified with a one-key start. Here is a related introduction to the advantages and disadvantages of the one-key start feature in cars: 1. Within the monitoring range, you can directly start the car door by carrying the sensing device card, eliminating the hassle of searching for the car key. 2. Simply press the brake and lightly press the one-key start button to start the engine, skipping the process of finding the key tool. 3. The vehicle has an automatic anti-theft alarm, equipped with all the features of an anti-theft device, and also includes unique functions such as a microcomputer-controlled automatic window closing and trunk opening. Method for installing the one-key start in the Audi A3: 1. First, remove the instrument panel and door panel, and take out the wiring harness inside. 2. Unplug the socket from the SY start switch and locate the + power supply, NCC, N2, N2, and ignition wires. 3. Solder the wiring connections for the one-key start device. To avoid damaging the original car wiring, use plug connections. 4. Disengage the mechanical steering wheel lock, cut the original car key, set the original car start switch to the ACC position, then attach the one-key start button to the original switch position, match the key, and complete the installation.

13

3

Share

What is the fuel tank capacity of a BMW in liters?

What transmission does the Golf 6 use?

Why is the car throttle response sluggish?

Where to Place the Automotive First Aid Kit?

What Causes the Engine Abnormal Noise in BMW 523li?

How many times a year should a car be inspected after 15 years?

Can the Audi A3 be modified with a one-key start?

How to Deal with a Two-Year Overdue Vehicle Inspection?

Will there be any consequences if the front license plate fell off and was unknowingly captured by traffic cameras?

Can a car be exposed to the sun after painting?

What are the dimensions of the Tacqua in terms of length, width, and height?