What is the fuel tank capacity of a 50-seater bus?

2 Answers
DeAdalynn
07/29/25 8:02am
The fuel tank capacity of a 50-seater bus is approximately 100 liters. Generally, large buses require sizable fuel tanks to meet the demands of long-distance travel, but excessively large tanks may not comply with usage standards and could be restricted. Therefore, the fuel tank of a large bus must balance both range and regulatory compliance. Below is additional information: 1. Fuel tank materials: Automobile fuel tanks are categorized by material into steel and aluminum alloy tanks. With the development of new materials, the rust prevention issue of steel tanks has become a major quality concern. 2. Tank quality: The quality of fuel tanks, which are critical for storing fuel, is a key focus. Aluminum alloy tanks not only meet strength requirements but also offer significant advantages in corrosion resistance compared to steel and other new materials. They have become the preferred choice for large buses and heavy-duty trucks, which consume large amounts of fuel and require high fuel quality.
Was this review help?
10
2
Share
MacRyder
08/12/25 11:15am
With over 20 years of experience driving coaches, I can say that the fuel tank capacity of a 50-seater coach generally ranges between 150 to 200 liters, depending on the model and manufacturer. For common brands like Yutong or King Long coaches, diesel models typically have around 150 liters. A full tank can usually cover about 600 to 700 kilometers, which is ideal for long-distance travel, reducing the need for frequent fuel stops. A tank that's too small would require more stops on long trips, while one that's too large adds weight and increases fuel consumption. I've also encountered coaches with higher-positioned fuel tanks, which, when fully loaded, can reduce fuel consumption by about 15%. Regular maintenance checks on the tank's seals are crucial to prevent leaks and malfunctions. When selecting a coach, I prioritize fuel efficiency—a 160-liter tank in an economical model can handle most trips. However, it's important to avoid rough terrains to prevent damage to the fuel tank.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

What are the types of final drives?

There are several types of final drives: 1. Two-stage reduction gear: It features an additional intermediate gear. The left side of the driving bevel gear meshes with the bevel gear portion of the intermediate gear, while a small-diameter spur gear on the same shaft as the bevel gear meshes with the driven gear. 2. Single-stage reduction gear: It consists of a driving bevel gear and a driven bevel gear. The driving bevel gear connects to the drive shaft and rotates clockwise, with the driven bevel gear positioned to its right. The meshing point rotates downward, aligning with the forward direction of the wheels. The function of the final drive is to further reduce the speed of the power output from the transmission to increase torque, before transferring the power to the differential.
5
1
Share

How to Properly Start and Shut Down a Push-to-Start Car?

The correct methods to start and shut down a push-to-start car are as follows: 1. Starting: Press the button twice without stepping on any pedals. The vehicle will enter the self-check process. Observe the dashboard indicator lights turning on one by one until they all go off, indicating the vehicle has completed all self-check procedures. Then, press the button again while stepping on the brake, and the vehicle will start normally. 2. Shutting down: Step on the brake to bring the vehicle to a complete stop. Shift the gear from D (Drive) to N (Neutral); engage the handbrake (for electronic handbrakes, pull it upward); continue holding the brake, shift the gear from N to P (Park); release the brake, press the push-to-start button, and the power will turn off, completing the shutdown process.
10
4
Share

What Causes Abnormal Noise in Car Compressors?

Here are the specific reasons for abnormal noise in car compressors: 1. Electromagnetic clutch contamination: Due to the proximity of the electromagnetic clutch to the ground, long-term driving can cause the clutch to accumulate dirt or mud, leading to internal bearing damage and resulting in abnormal noise. 2. Loose drive belt: The car air conditioning compressor has high operational requirements for the electromagnetic clutch. A loose drive belt increases the load on the electromagnetic clutch, making it prone to damage and, in severe cases, can cause the compressor to burn out. 3. Repeated engagement of the electromagnetic clutch: Frequent engagement of the electromagnetic clutch can lead to insufficient power generation by the alternator, causing inadequate working voltage for the compressor and resulting in abnormal noise. 4. Lack of lubricating oil: Insufficient lubricating oil inside the compressor. After prolonged use, the compressor should be appropriately lubricated to avoid noise or failure caused by friction.
18
4
Share

What are the effects of a cracked engine intake hose?

Engine intake hose cracking can cause vehicle shaking and insufficient engine power. Below is a detailed introduction to the engine intake system: 1. Composition: The engine intake system is the passage for air to enter and exit the air filter. The intake pipe connects the air filter to the carburetor manifold, while the intake manifold is the pipe that connects the bottom of the carburetor at the upper end to the intake valves on the cylinder block at the lower end. 2. Function: The intake pipe includes the main intake pipe and branch intake pipes. In addition to power performance, the engine must also have good fuel economy and emission performance. In gasoline engines, the intake pipe must also consider issues such as fuel atomization, evaporation, distribution, and pressure wave utilization. In diesel engines, it is required that the airflow forms an intake vortex in the cylinder through the intake system to improve mixture formation and combustion.
18
5
Share

Where is the child lock on the Volkswagen Tayron?

Volkswagen Tayron's child locks are located on the two rear doors. The child lock, also known as the child safety door lock, is set on the rear door locks. To activate it, open the rear door and find a small lever below the door lock. Push the lever towards the end with the child icon, then close the door. Once activated, the door cannot be opened from the inside and can only be opened from the outside. The Tayron is a model under FAW-Volkswagen, with dimensions of 4589mm in length, 1860mm in width, and 1660mm in height, and a wheelbase of 2731mm. In terms of power, this car is equipped with three engines: a 1.4L turbocharged engine, a low-power 2.0L turbocharged engine, and a high-power 2.0L turbocharged engine.
19
4
Share

What are the reasons for the self-reduction of engine oil?

Engine oil self-reduction is caused by: 1. Aging of cylinders, pistons, or piston rings; 2. Weakened sealing of valve guides; 3. Aging of engine body sealing rings, leading to weakened sealing; 4. Loose bottom oil tank screws. Engine oil is composed of base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives compensate for and improve the shortcomings of the base oil's performance. It is divided into diesel engine oil and gasoline engine oil. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption for the engine.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.