What is the fuel consumption per kilometer for the Landwind X7?

1 Answers
VincentDella
07/29/25 6:34pm
The fuel consumption of the Landwind X7 ranges from 8.9 to 10.4L/100km. Below is a related introduction to the Landwind X7 Jingyue: Appearance: Based on the overall design, the headlight style has been changed, integrating the headlights with the grille. The headlight design is very dynamic, with daytime running lights shaped like an "L." The lower grille area has been enlarged, enhancing the sporty feel of the front face. The rear features chrome trim instead, and the taillights adopt a rectangular dual-exhaust layout. Performance: Equipped with a 1.5GTDI engine, it delivers a maximum horsepower of 163Ps, a maximum power of 120kW, and a peak torque output of 250Nm, reaching the maximum torque range at just 1500 rpm.
Was this review help?
14
5
Share
More Forum Discussions

How to reset the oil reset light on the Lavida?

To reset the oil reset light on the Lavida, follow these specific steps: 1. First, turn off the key, press and hold the maintenance reset button, then turn on the key and wait for a moment until the maintenance cycle indicator displays normally. 2. Turn off the key and reopen it to test if the reset was successful. If not, you can try again. Here is some additional information about the Lavida: 1. The Lavida is a sedan produced by Shanghai Volkswagen. While continuing the "dynamic and fashionable" design language of the A-class car market, the Lavida embodies a new design DNA. 2. The Lavida maintains the excellent quality of German design while incorporating many aesthetic concepts that reflect traditional Chinese culture and cutting-edge design elements of the era.
5
0
Share

Can the Honda CR-V Hybrid Get a Green License Plate?

The hybrid CR-V is a non-plug-in hybrid and cannot be classified as a new energy vehicle because it essentially still relies on energy from fuel combustion. Therefore, it does not qualify for a green license plate. More relevant information is as follows: 1. In terms of appearance, the hybrid CR-V is quite conventional, with no major changes compared to the previous model. The most noticeable difference is that the rear end is no longer as raised. For the interior, soft materials are extensively used, providing a good tactile feel, and wood-grain trim panels are added in certain areas to enhance the premium feel. The dashboard features a clear LCD screen, and the center console is equipped with an 8-inch LCD display. 2. In terms of powertrain, it uses a 2.0L four-cylinder naturally aspirated engine paired with a dual-motor (one generator and one electric motor) system, along with an eCVT transmission and a lithium-ion battery pack. The engine delivers a maximum horsepower of 145 hp, while the electric motor provides 184 hp. With the support of the electric motor, acceleration and overtaking performance are both effortless.
7
4
Share

What are the causes of transmission noise in the Envision?

The causes of transmission noise in the Envision are: 1. Issues with the transmission fluid itself, where excessive viscosity in cold conditions leads to poor fluidity during operation, causing abnormal behavior in working components. 2. Problems with the transmission itself, such as internal pressure leaks, malfunctioning valve bodies or hydraulic pistons, resulting in improper alignment of the conical wheel position. Below is a detailed introduction to the Envision's transmission: 1. The Envision's transmission is assembled and produced in mainland China; the dual-clutch transmission combines the advantages of manual and automatic transmissions, eliminating the torque converter and instead using two sets of clutches that alternate to achieve seamless gear shifting. 2. The two sets of clutches control odd and even gears respectively. Specifically, before shifting, the DSG pre-engages the next gear. Upon receiving the shift command, the DSG quickly signals the engine to increase speed, at which point the pre-engaged gear swiftly engages while the first clutch fully disengages, completing an upshift. Subsequent actions follow similarly. 3. Without a hydraulic torque converter, the engine's power can be fully utilized. Additionally, the alternating operation of the two clutches ensures extremely short shift times, minimizing power interruption from the engine.
1
5
Share

How to reset the brake pad warning light on BMW 5 Series?

Turn on the ignition, press the reset button for 8 seconds until the oil symbol appears on the multifunction display in the instrument cluster. Press the button again to display the rear brake pad system reset. Select the item that needs to be reset, press and hold the reset button for 3 seconds until the display shows "reset", then press the reset button again until the display shows "OK". Finally, turn off the ignition. Additional information: 1. The brake pad warning system works by inserting a sensor wire into the brake pad. When the brake pad wears excessively, the sensor wire contacts the brake disc or gets worn through, causing a change in resistance that generates an electrical current. This signal is detected, triggering the brake pad warning light on the dashboard. 2. The illuminated brake pad warning light may indicate severely worn brake pads that require immediate inspection and replacement at a service center. It could also mean low brake fluid level - insufficient brake fluid reduces braking power and may even lead to complete brake failure in severe cases, requiring immediate fluid replenishment. Other possibilities include brake system leaks or false alarms, all of which need systematic troubleshooting. 3. If the brake pad warning light comes on while driving, gradually reduce speed and pull over safely. You can visually inspect whether it's a brake pad wear issue, but it's recommended to visit the nearest professional auto repair shop. Technicians can use an automotive computer diagnostic tool to check the ABS system, read fault codes, identify the problem source, and perform necessary repairs based on the diagnosis.
7
0
Share

What transmission does the Honda Civic use?

Honda Civic uses two types of transmissions, namely CVT continuously variable transmission and 6-speed manual transmission. More relevant information is as follows: 1. The latest Honda Civic has a body length of 4658mm, a width of 1800mm, a height of 1416mm, and a wheelbase of 2700mm. The latest Honda Civic is equipped with 1.0T and 1.5T engine versions, with maximum output power of 92 kilowatts and 130 kilowatts respectively. 2. The latest Honda Civic comes standard with driver and passenger airbags, tire pressure monitoring function, ABS anti-lock braking, brake force distribution, brake assist, traction control, body stability system, engine start-stop, automatic parking, hill start assist, variable steering ratio, etc.
3
0
Share

Is the Haval H6 a domestic car?

Haval H6 is a domestic car under the Great Wall brand, positioned as a city SUV and the best-selling model in China. It boasts outstanding product strength, luxurious interior, rich configurations, and powerful performance, making it a national favorite car. More relevant information is as follows: 1. The Haval H6 is a domestic SUV model under the Great Wall Motor Group, positioned as a city SUV, consistently maintaining the title of the best-selling and most popular SUV. In terms of drive, it offers both two-wheel drive and four-wheel drive options. Its exterior design does not follow the traditional off-road style but adopts a more fashionable and widely accepted new design style, exuding a sense of grandeur and stability. 2. The Haval H6 features an advanced intelligent voice interaction system that allows voice control for navigation, air conditioning, music, windows, and other functions. It also delivers strong performance with a maximum power of 124KW and torque of 285Nm, equipped with a 7DCT wet dual-clutch transmission for low fuel consumption. Additionally, it incorporates a leading 3DP safety concept design to minimize the driver's risk.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.