What is the fuel consumption per kilometer for the Dongfeng Fengxing Lingzhi 1.6?

1 Answers
LeKennedy
07/25/25 3:09am
Dongfeng Fengxing Lingzhi 1.6L consumes 0.7 liters of fuel per kilometer. Below are the relevant details: 1. Body dimensions: The Lingzhi M3 has a wheelbase of 2800mm, with body dimensions of 4645mm × 1695mm × 1940mm, and a maximum cargo space of up to 4340L, offering strong transportation capabilities. 2. Powertrain: It is equipped with the Mitsubishi 4G18S1 engine, known as the 'golden small displacement' 1.6L engine, which provides powerful performance while being fuel-efficient. Additionally, the 2013 Lingzhi M3 has upgraded interiors and configurations, along with some user-friendly features, further enhancing the overall comfort and safety of the vehicle.
Was this review help?
5
3
Share
More Forum Discussions

What Causes the Car Not to Move When Releasing the Clutch?

Analysis of reasons why the car does not move when releasing the clutch is as follows: 1. The clutch is not fully engaged: The clutch should be inspected and repaired promptly. 2. The handbrake is not released: If the handbrake of a manual transmission car is not returned to its position, it should be released immediately. 3. The gear is stuck: If the gear is stuck and not fully engaged, simply shift gears again. 4. Worn clutch disc: A worn clutch disc may result in no effect when slowly releasing the clutch, requiring replacement of the clutch disc. Below are precautions for driving a manual transmission car: 1. Slowly release the clutch when starting: To ensure smooth starting, control the clutch and throttle properly, and slowly release the clutch to start. 2. Regarding gear shifting: When driving a manual transmission car, shift gears promptly based on the vehicle's RPM.
4
0
Share

What lights to use when approaching an intersection?

Low beam headlights should be used. When passing through uncontrolled intersections, arch bridges, curves, or unguarded railway crossings, alternate between high and low beams at least twice. The driver's license examination consists of four sections: 1. Section One: Tests on road traffic safety laws, regulations, and related knowledge. The question bank structure and basic question types are formulated by the Ministry of Public Security, while provincial traffic management departments establish local question banks based on regional circumstances. 2. Section Two: Field driving skills test, including: reverse parking, hill start and stop, right-angle turns, curve driving, and parallel parking. 3. Section Three: Road driving skills test, covering: pre-driving checks and starting, straight-line driving, lane changes, passing intersections, pulling over, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, U-turns, and night driving. 4. Section Four: Safe and civilized driving knowledge test, covering relevant safe driving practices.
8
5
Share

Can You Pass the Driving Test Without Remembering the Route for Subject Three?

It is possible to pass the Subject Three driving test even if you cannot remember the route. If a candidate really struggles to memorize the route, they should still try to familiarize themselves with it as much as possible and be well-versed in the operations required for each test item. During the exam, maintaining composure and following the voice prompts is crucial. Below are some important notes for the Subject Three test: 1. Check before getting in the car: Before the Subject Three test, you need to walk around the car once for inspection. The test vehicle usually has two sensors, one at the front and one at the back. When walking around the car, pause briefly near the sensors to ensure they detect you. 2. Adjust before operating: Adjust the car's rearview mirrors and seat height, then confirm if they are suitable. When observing through the rearview mirrors, make sure you can see the rear wheels. Fasten your seatbelt and ensure the gear is in the neutral position before starting the engine.
8
4
Share

Does an Air Filter with Cotton Affect Engine Power?

An air filter with cotton can indeed affect engine power. Here are the detailed explanations: 1. Explanation One: The function of an air filter is quite simple—it removes tiny impurities from the air. 2. Explanation Two: During operation, the engine needs to intake a large amount of air. If the air is not filtered, the dust suspended in the air will be drawn into the cylinders, accelerating the wear of the piston assembly and cylinders. 3. Explanation Three: Larger particles entering between the piston and cylinder can cause severe "cylinder scoring," which is particularly problematic in dry and sandy working environments.
17
1
Share

What are the key points of Subject 3 test?

Subject 3 test points are as follows: 1. Start slowly: 80% of failures during starting are due to nervousness and haste, either failing to control the clutch properly or forgetting to pull up the handbrake. 2. Ignite slowly: During the test, it's inevitable to encounter stalling. At this time, don't rush to ignite. After stalling, the first thing to do is to pull the handbrake and shift to neutral. 3. Steer slowly: Any significant steering wheel operation, such as lane changing or starting, requires the use of turn signals. The lights serve both illumination and alert functions, reminding other vehicles of your next move. 4. Brake slowly: When hearing the instruction, pay attention to decelerating, but don't slam on the brakes suddenly as it can easily cause a rear-end collision.
5
1
Share

What are the requirements for the duration and mileage of Subject 3?

Mileage must be no less than 300 kilometers. Subject 3 requires 12 hours of theoretical training and 24 hours of practical training, totaling 36 hours. Below are detailed introductions about it: 1. Introduction one: Subject 3 mainly focuses on mastering safe and civilized driving knowledge and possessing comprehensive vehicle control abilities. 2. Introduction two: It aims to develop the ability to consciously comply with traffic regulations, effectively handle random traffic situations, and unconsciously and reasonably operate the vehicle. 3. Introduction three: It involves understanding the dynamic characteristics of pedestrians and non-motor vehicles, as well as methods for predicting and analyzing risks, mastering general road and night driving techniques, and being able to drive safely under different road traffic conditions.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.