What is the fuel consumption per kilometer for the Audi Q2L?

2 Answers
SanLila
09/08/25 6:41am
The fuel consumption per kilometer for the Audi Q2L is 0.075 liters. This engine can deliver maximum power at 5000 to 6000 rpm and maximum torque at 1750 to 3000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. The dual-clutch transmission has high transmission efficiency and fast gear shifting, providing a crisp and responsive driving experience. Due to its high transmission efficiency, vehicles equipped with dual-clutch transmissions generally have good fuel economy. The interior design of the Audi Q2L follows the typical Audi family style, offering a high-tech feel with meticulous craftsmanship and premium materials. The Audi interior resembles a finely crafted and highly functional electronic gadget, which is particularly appealing to many female consumers. The Audi Q2L is equipped with a MacPherson independent front suspension and a multi-link independent rear suspension.
Was this review help?
19
5
Share
StHope
09/20/25 5:12am
As a car enthusiast who frequently test drives new vehicles, I'm familiar with the fuel consumption of the Audi Q2L. The official data for this compact SUV is approximately 6.5 to 7.5 liters per 100 kilometers, which translates to about 0.065 to 0.075 liters per kilometer. In real-world driving conditions, especially in congested urban traffic, the fuel consumption may rise above 8 liters per 100 kilometers, equivalent to 0.08 liters per kilometer. This is influenced by driving habits such as rapid acceleration or air conditioning usage. I recommend comparing it with similar models like the Mercedes-Benz GLA, which has comparable fuel consumption at around 7 liters per 100 kilometers. However, the Q2L's 1.4T engine is relatively fuel-efficient. Paying attention to smooth driving and regular maintenance, such as checking tire pressure and fuel lines, can help reduce fuel consumption slightly, saving a few cents per kilometer.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

Reasons for Audi Steering System Malfunctions?

Audi a6l steering system malfunctions and their solutions are as follows: 1. Abnormal noise during steering: The cause of abnormal noise during car steering is generally due to damage to the kingpin and bushing, or damage to the column thrust bearing. When encountering this situation, you can turn the steering wheel left and right and disassemble and inspect based on the location of the noise. 2. Steering gear oil leakage: Oil leakage in the steering gear usually occurs at three places: the upper cover of the steering gear, the connection between the steering shaft and the arm, and the side end cover. This is often caused by prolonged use of the car leading to sealing issues. Since these three parts have sealing rings, replacing the oil seal and sealing rings can solve the problem. However, if oil leakage occurs in other parts, it may be due to sand holes or cracks in the steering gear housing. Small gaps can be sealed with high-permeability sealant, while larger gaps require replacement of the corresponding parts.
1
1
Share

How to Use Auto Start-Stop?

When encountering a red light or other situations that require stopping while driving, press the brake pedal, and the engine will typically shut off automatically after two seconds. To start moving again, simply release the brake, press the accelerator, or gently turn the steering wheel, and the engine will restart. Below are some key points about the auto start-stop function: 1. Auto start-stop activates the engine only when needed for driving and shuts it off during situations like waiting at red lights or in traffic jams, reducing unnecessary fuel consumption. The auto start-stop system can lower fuel consumption by up to 15%. 2. The auto start-stop function should be avoided when driving on slopes. Using it on inclines can easily lead to the vehicle rolling backward or forward. 3. When driving through water, remember to turn off this function. If the engine stalls in water, repeatedly shutting it off and restarting can cause secondary damage to the engine, leading to additional losses.
1
2
Share

What Causes the Sudden Illumination of the Lynk & Co 01 Engine Fault Light?

The main reasons for the Lynk & Co 01 engine fault light to illuminate are the following 7: Sensor malfunction: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, which will then trigger the engine fault light. Fuel quality issues: If fuel and engine oil are not added as required by the manufacturer, it may cause engine wear, leading to the illumination of the fault light. Poor mixture combustion: Poor mixture combustion can lead to engine carbon buildup or knocking. Once detected by the oxygen sensor and reported to the ECU, the fault light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor mixture combustion in the engine. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine fault light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may cause engine pipeline blockage, and in severe cases, trigger the engine fault light. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust faults can also cause the engine fault light to illuminate. The rear oxygen sensor, three-way catalytic converter, exhaust camshaft, and bearing failures are all causes of exhaust problems, with the three-way catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or faults in the engine fuel supply system can easily cause three-way catalytic converter failure. Anti-theft system malfunction: If the car's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can also prevent the engine from operating normally, while illuminating the engine fault light. If the engine fault light illuminates, follow these steps: First, check if the engine is running normally, whether there is shaking, black smoke, etc. If so, try not to restart the engine. Especially note that if the red light is on, do not restart the engine under any circumstances. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once or turn the key halfway to the 'on' position without pressing the clutch. The car will perform a self-check after powering on. Wait for 5-10 seconds to observe whether the fault light on the dashboard goes off. If the fault light does not go off, proceed to a service station as soon as possible to identify the cause. The service station can use a portable diagnostic tool to read the fault codes, obtain fault information, and perform targeted repairs.
9
5
Share

Should You Turn Off AC When Turning Off the Car?

You should turn off the AC when turning off the car. Forgetting to turn off the air conditioning when the car is off will consume battery power. If you don't turn it off before shutting down the engine, it will automatically start the next time you start the car, which will place a heavy burden on the battery and cause wear. Additional Information: 1. Principle: The air conditioning system involves the compressor and blower, and the audio system is also a high-power electrical device. If not turned off before shutting down the engine, they will automatically start the next time you start the car, placing a heavy burden on the battery and causing wear. This is especially true if the car's audio system has been modified, as it consumes more power normally and creates a greater impact on the battery during startup. Therefore, whether it's a temporary stop or a long-term parking, you should turn off the air conditioning and audio system before shutting down the engine. 2. Battery Maintenance: Car owners should pay attention to the condition of the car battery and perform regular checks and maintenance. With the changing driving habits nowadays, there are more and more electrical devices in cars, which increases the pressure on the car battery. Without careful inspection and maintenance, the car battery can easily malfunction. Therefore, car owners must strengthen the inspection and maintenance of the car battery to avoid faults caused by the battery, which can bring trouble to driving.
16
0
Share

What is the difference between Mitsubishi's Super Select 4WD and full-time 4WD systems?

The difference between the two is that the Super Select 4WD has multiple driving modes, while the full-time 4WD has only one driving mode. Below are the specific introductions of Super Select 4WD and full-time 4WD: Super Select 4WD: 1. It is divided into four driving modes: 2H (high-speed 2WD), 4H (high-speed 4WD), 4HL (high-speed 4WD locked), and 4LL (low-speed 4WD locked). 2. The 2H (high-speed 2WD) and 4H (high-speed 4WD) modes can be used for a long time on good urban asphalt roads. 3. The 4HL (high-speed 4WD locked) and 4LL (low-speed 4WD locked) modes can be used for a short time on harsh environmental roads. Full-time 4WD: 1. It is generally equipped with electronic assistance devices. When the device detects high torque output, it automatically switches to 4WD mode, which requires manual switching. 2. All four wheels of the vehicle serve as drive wheels to transmit power.
11
3
Share

What is the long-distance fuel consumption of BYD Qin Hybrid?

BYD Qin Hybrid has a long-distance fuel consumption of approximately 4.5 liters per 100 kilometers. More relevant information is as follows: 1. Engine configuration: The hybrid version of BYD Qin is equipped with a 1.5-liter turbocharged engine and a 150-horsepower electric motor. The 1.5-liter turbocharged engine, coded as BYD476ZQA, has a maximum power of 113 kW, a maximum torque of 240 Nm, a maximum power speed of 5200 rpm, and a maximum torque speed range of 1750 to 3500 rpm. 2. Driving modes: Pure Electric + Economy: The engine is not used, and the car runs on electricity. When the accelerator is pressed, the controller slowly increases the current to the motor. Pure Electric + Sport: Similarly, the engine is not used. When the accelerator is fully pressed, the controller directly supplies a larger current to the motor. Hybrid + Sport: The engine operates like a conventional vehicle, starting and stopping only manually. The engine transmits 100% of its power to the wheels, and the motor also operates at maximum power. Hybrid + Economy: The engine is not used when the speed is below 40 km/h and the battery level is above 15%. When the speed exceeds 40 km/h, the engine automatically starts, providing only 10% of its power to the vehicle. The controller still slowly increases the current to the motor and charges the battery. If the speed is below 40 km/h and the battery level drops below 15%, the engine will start but not provide power to the vehicle, idling to charge the battery. As long as the speed does not exceed 40 km/h, the engine will automatically shut off once the battery is charged above 25%.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.