What is the fuel consumption per kilometer for the 2015 Citroen C3?

What Causes the Ticking Sound in a Motorcycle Engine?

The reasons for the ticking sound in a motorcycle engine are as follows: A distinct ticking sound from the cylinder head area of the motorcycle indicates that the valve clearance is relatively large. Under the effect of air collision, this produces the ticking sound. Experienced mechanics often adjust the valve clearance based on the intensity of this ticking sound. Relevant information is introduced below: After starting the motorcycle, as the engine heats up, the thermal expansion coefficient of the aluminum alloy cylinder head is greater than that of the steel valves. Therefore, some smaller valve clearances gradually widen. If the valve clearance exceeds the permissible value when the engine cools down, it will produce a ticking sound when heated. Hence, when hearing the ticking sound from the valves, it is advisable not to attempt adjustments based on personal experience. Instead, it is best to take the motorcycle to a professional repair shop for maintenance to prevent accidents during the repair process, which could cause further damage to the motorcycle and lead to potential risks and issues while riding.

12

4

Share

How new is a motorcycle that has run over 10,000 kilometers?

For a motorcycle that has run over 10,000 kilometers, its condition mainly depends on maintenance level. With proper maintenance, it's generally considered 80% new. Relevant information is introduced as follows: Three-wheeled motorcycles are scrapped after running 100,000 kilometers, while other motorcycles are scrapped after 120,000 kilometers. According to the "Mandatory Motor Vehicle Scrapping Standards Regulations", the state guides the scrapping of motor vehicles that have reached certain mileage limits. Owners may sell their vehicles to qualified scrapping and recycling enterprises, which will handle registration, dismantling, and destruction according to regulations, and submit the scrapped vehicle's registration certificate, license plate, and driving license to traffic management authorities for cancellation.

20

0

Share

What Causes High Engine RPM but Low Speed in Motorcycles?

High engine RPM but low speed in motorcycles may be caused by clutch slippage. The engine's RPM can increase, but the vehicle speed does not correspondingly rise. If the riding technique is correct, clutch slippage could be the issue. First, check the engine oil condition, whether the clutch cable is too tight, and if the clutch release arm is stuck or not returning to position. If these are not the problems, inspect the wear condition of the clutch plates and the clutch springs for any issues. Below is an introduction related to engine RPM: The level of engine RPM relates to the number of power strokes per unit time or the effective power output of the engine, meaning the engine's effective power varies with RPM. Therefore, when specifying the engine's effective power, the corresponding RPM must also be indicated. The effective power and its corresponding RPM specified on the engine's product nameplate are referred to as the rated power and rated RPM, respectively. The operating condition of the engine at rated power and RPM is called the rated condition. Rated power is not the maximum power the engine can produce; it is the maximum usable limit of effective power determined based on the engine's intended use. For the same engine model, the rated power value may differ depending on its application.

18

0

Share

How Long Can a Motorcycle Be Delayed Before It Is Considered Overdue for Inspection?

Two-wheeled motorcycles require an annual inspection. Exceeding the stipulated inspection period constitutes being overdue for inspection. Relevant information is introduced as follows: Motorcycles, like cars, need annual inspections, and the inspection policies are largely similar. Exceeding the inspection deadline means the motorcycle is overdue for inspection and cannot be driven on the road. Motorcycles within four years of use require an inspection every two years, while those over four years old require an annual inspection. Motorcycles that have not completed their inspections are considered overdue. If a motorcycle fails to undergo inspection for three consecutive inspection cycles, its vehicle license will be revoked and cannot be reinstated. Failing to complete the inspection on time may result in penalties if stopped by traffic police, so it is necessary to renew the inspection promptly to avoid serious consequences.

12

4

Share

Is it safe to ride a motorcycle emitting white smoke?

It is not advisable to ride a motorcycle emitting white smoke. When a motorcycle emits a small amount of white smoke upon cold start, it is due to low engine temperature causing poor atomization of the air-fuel mixture entering the cylinder, which is normal. However, if a multi-cylinder engine continuously emits white smoke, it may indicate a faulty spark plug in one cylinder, and it is recommended to visit a repair shop. Here are the reasons for a motorcycle emitting white smoke: Excessive water content in gasoline can cause white smoke. If the motorcycle has been stored for an extended period, drain the fuel from the carburetor and add fresh gasoline to the tank. Water in the exhaust pipe, caused by rain exposure or submersion, can also lead to white smoke. Lack of maintenance: Four-stroke motorcycles may emit faint white smoke during warm-up as the engine automatically activates the choke, causing slightly higher idle speed than normal. Solutions: Regularly replace the air filter. Change the engine oil periodically. Replace spark plugs at regular intervals. Adopt proper riding techniques. Conduct regular inspections and maintenance. Warm up the engine before riding.

14

4

Share

What Causes the Rattling Noise in a Motorcycle's Low-Speed Chain?

Motorcycle low-speed chain rattling noise can be caused by an overly tight chain or lack of lubrication. Specific causes and solutions are as follows: Overly Tight Chain: Check if the chain is adjusted too tightly. Normally, after proper adjustment, the chain should have 20-30mm of vertical play. If the chain is too tight, it will not only produce noise but also accelerate wear on both the sprocket and chain. The solution is to readjust the chain tension. Lack of Lubrication: If the chain tension is correct, inspect whether the chain lacks lubrication. A dry chain will generate rattling sounds. The solution is to apply chain lubricant. Relevant maintenance information: Chains accumulate dirt, rust, and wear during regular use. They typically require cleaning and maintenance every 500km. A common operational issue is "chain binding," where adjacent links or a small section become stiff due to corrosion or inadequate maintenance, causing loss of flexibility. This leads to rough chain rotation, engine power wastage on chain movement, and potential chain derailment. Therefore, regular chain cleaning and maintenance are crucial.

18

3

Share

What is the fuel consumption per kilometer for the 2015 Citroen C3?

What Causes the Ticking Sound in a Motorcycle Engine?

How new is a motorcycle that has run over 10,000 kilometers?

What Causes High Engine RPM but Low Speed in Motorcycles?

How Long Can a Motorcycle Be Delayed Before It Is Considered Overdue for Inspection?

Is it safe to ride a motorcycle emitting white smoke?

What Causes the Rattling Noise in a Motorcycle's Low-Speed Chain?

Is a motorcycle speed of over 70 km/h considered fast?

What Does Motorcycle Horsepower Mean?

Which highways allow motorcycles?

What is the function of motorcycle winglets?