What is the fuel consumption per 100 kilometers of the Geely Xingrui?

2 Answers
DelAdelyn
07/28/25 3:52pm
Geely Xingrui's MIIT fuel consumption is 6.7L/100km. Additional information: 1. Definition of fuel consumption: Fuel consumption generally refers to constant-speed fuel consumption. Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. 2. These types of vehicles include: (1) M1 category, M2 category with a maximum design total mass not exceeding 3.5t, and N1 category compressed natural gas vehicles; M1 category and N1 category vehicles with a maximum design total mass not exceeding 3.5t, tested according to the method specified in GB/T-12545.1-2008 "Test methods for fuel consumption of passenger cars". (2) M2 category, M3 category with a maximum design total mass exceeding 3.5t, and N2 category, N3 category compressed natural gas vehicles; M2 category, M3 category, and N category vehicles with a maximum total mass greater than or equal to 2t, tested according to the method specified in GB/T-12545.2-2001 "Test methods for fuel consumption of commercial vehicles".
Was this review help?
13
1
Share
Phillips
08/11/25 11:04pm
I've been driving this Xingrui for a year and a half, with city commuting fuel consumption averaging around 8-9 liters per 100km, reaching 9.5 with AC on in summer. Two days ago, I specifically took a highway trip to test it - maintaining a steady 100km/h with AC on, it only consumed 6.2 liters, showing 6.8 after exiting the highway. Actually, fuel consumption is heavily influenced by driving habits - my neighbor with the same model keeps braking and accelerating aggressively, and his fuel consumption never drops below 10 liters. Paying attention to avoiding floor acceleration, easing off the throttle before traffic lights, and maintaining tire pressure at 2.5 can all save significant fuel costs. With recent sharp fuel price hikes, I've installed the Xiaoxiong Fuel Consumption app and found that using 95 octane costs less than 0.1 yuan more per kilometer than 92 octane, but delivers noticeably smoother power.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

How long does it take for the water temperature to normalize after starting the car?

How long it takes for the water temperature to normalize after starting the car depends on the season and humidity conditions. In winter when the weather is colder, it takes about 5 to 10 minutes if the temperature is below 5 degrees Celsius, and 1 to 2 minutes if it's above 5 degrees. If the engine is too cold, the internal oil becomes less lubricating and cannot effectively lubricate the engine. Starting the car in this condition will cause wear on the engine cylinders, shortening the engine's lifespan. The correct method to allow the car's water temperature to reach normal levels is to drive slowly at low speeds. Avoid high RPMs and maintain a low speed, keeping the engine speed below 3000 RPM, generally around 2000 RPM. Otherwise, the severe wear on the engine and transmission may be irreversible. Once the engine temperature rises to the normal operating temperature (which usually takes about 3 to 5 minutes), you can resume normal driving.
14
5
Share

Where is the motorcycle three-way catalytic converter located?

Motorcycle three-way catalytic converters are located inside the exhaust pipe. Here's some information about three-way catalytic converters: 1. Installation regulations: According to the regulations of the Ministry of Environmental Protection of the People's Republic of China, not every motorcycle is equipped with one. 2. Three-way catalytic converter: It is the most important external purification device installed in the exhaust system, which can convert harmful gases such as CO, HC, and NOx in the exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. When high-temperature exhaust passes through the purification device, the purifying agent in the three-way catalytic converter enhances the activity of CO, HC, and NOx, promoting certain oxidation-reduction chemical reactions. CO is oxidized into colorless, non-toxic carbon dioxide gas at high temperatures; HC compounds are oxidized into water (H2O) and carbon dioxide; NOx is reduced into nitrogen and oxygen. These three harmful gases are transformed into harmless gases, thereby purifying the vehicle's exhaust emissions.
15
2
Share

How to Repair a Crack in Glass?

Fill the crack with liquid resin, clean the gap, and use a vacuum injector to remove the air inside the glass crack. Then, fill it with liquid resin. After repeatedly extracting and pressing, use a UV lamp to irradiate for two minutes in all directions (up, down, left, and right) to allow the repair solution to solidify. Next, apply a high-concentration repair agent to the crack, cover it with a glass piece, and dry it. Finally, use a blade to level the surface, apply a polishing agent, and polish it with a cloth. Below is relevant information about automotive glass: 1. Manufacturing Process: Automotive glass is made by heating the glass in a furnace to near its softening temperature, then quickly transferring it to air grids with different cooling intensities for uneven cooling, creating varying stress levels between the main viewing area and the peripheral areas. 2. Types: It is divided into laminated glass and tempered glass. Laminated glass is a glass product made by bonding two or more layers of glass with one or more layers of transparent adhesive material. Tempered glass includes physical tempering and chemical tempering, with the commonly referred tempered glass being physically tempered.
4
2
Share

Which way to steer when the front is narrow and the rear is wide?

When the front is narrow and the rear is wide, steer towards the wider side to make the wider side narrower and avoid the other side crossing the line. Below are some steering precautions: 1. Check behind the car before reversing: Estimate the reversing route and determine whether the front of the car will hit obstacles during reversing. Especially when the steering wheel is turned significantly, the turning radius of the front wheels is larger than that of the rear wheels, and the front of the car swings outward more during reversing. Be careful to avoid scraping the front of the car. This method is more suitable when parking on the right side or when a longer reversing distance is required. 2. Rear steering: If the rear of the car needs to move to the right rear, turn the steering wheel to the right; conversely, turn it to the left. This is the same as the steering operation when driving forward. 3. Reversing: Do not only look behind the car while reversing. While ensuring safety behind the car, occasionally observe the left and right rearview mirrors, pay attention to the distance between obstacles and the car body, and use the steering wheel to adjust the car's position while reversing.
10
0
Share

What is the impact of toe-in size on handling?

Excessive toe-in can cause excessive wear on the inner edges of the front tires and make the steering wheel heavier to turn. On the other hand, insufficient toe-in can lead to excessive wear on the outer edges of the front tires and prevent the steering from automatically returning to center. Below is an introduction to toe-in: 1. Definition of toe-in: Front wheel toe-in refers to the condition where the front edges of the two front wheels are closer together than the rear edges. The difference in distance is called the toe-in value. Viewed from above the car, the two front wheels form a "V" shape pointing upwards. Toe-in can also refer to the angle between the front wheel plane and the direction of the car's movement, in which case it is called the toe-in angle. 2. Precautions for adjusting toe-in: Measure the distance between the centers of the front wheels at the middle, then measure the distance between the rear edges of the front wheels. The difference between these two measurements is the toe-in value. Correction is needed when the toe-in value exceeds 0-12mm.
5
0
Share

Does Carburetor Cleaner Have Corrosion?

Carburetor cleaner is not corrosive. Here is the relevant introduction about carburetor cleaner: 1. Definition of carburetor: Carburetor cleaner is a type of cleaning agent mainly used for cleaning amorphous carbon deposits and graphite carbon deposits on various workpieces, carburetors, and inside engines. It can also be used for cleaning amorphous carbon deposits and graphite carbon deposits on various catalysts. 2. Function of carburetor: Effectively cleans oil sludge and other contaminants on the surfaces of throttle valves and engine components. Effectively removes gum and carbon deposits from throttle valves, intake passages, and exhaust gas recirculation systems. Improves starting performance, enhances acceleration, eliminates unstable idle, and reduces emissions.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.