What is the fuel consumption per 100 kilometers of the Geely Vision?

1 Answers
McMaverick
07/30/25 5:15am
The MIIT comprehensive fuel consumption of the Geely Vision ranges from 5.9 to 6.3L/100km. Fuel consumption per 100 kilometers refers to the amount of fuel consumed by a vehicle traveling a distance of 100 kilometers at a certain speed on the road. The fuel consumption per 100 kilometers is measured by manufacturers in an objective environment, where the values obtained from a dynamometer installed on the vehicle's chassis are converted into speed parameters, and then the vehicle is driven at specified speeds to calculate the fuel consumption per 100 kilometers. Below is a detailed introduction to the Geely Vision: 1. Engine: The Geely Vision is equipped with Geely's new 1.8L and 1.5L CVVT all-aluminum engines, which have full independent intellectual property rights. These engines feature strong power, low fuel consumption, and low noise, with a particularly notable power-to-weight ratio of 57.2, showcasing their excellent performance. 2. Fuel Consumption: The Geely CVVT engine adopts an internationally advanced all-plastic intake manifold design, effectively reducing intake resistance, increasing air intake, and minimizing power loss, demonstrating strong fuel economy. 3. Environmental Protection: The engine utilizes CVVT and high-atomization fuel injectors, along with a front intake and rear exhaust layout, which enhances the efficiency of the catalytic converter, reduces exhaust emissions, and achieves low tailpipe emission levels equivalent to the European STEP III standard. This design not only pursues low fuel consumption but also aims for minimal environmental impact.
Was this review help?
4
3
Share
More Forum Discussions

What is the Ideal RPM for Highway Driving?

Highway driving typically maintains an engine RPM between 1000~3500. Below is relevant information about vehicle RPM: 1. Definition: Vehicle RPM refers to the rotational speed of a car's engine. 2. Function: RPM serves to promptly reflect engine operation status, enabling drivers to better coordinate transmission gears and throttle position, keeping the vehicle in optimal working condition to reduce fuel consumption and extend engine lifespan. The instrument displaying engine RPM under various working conditions is called a tachometer, generally installed on the dashboard symmetrically with the speedometer. Its unit is 1/min×1000, indicating how many thousands of revolutions the engine makes per minute. The faster the engine rotates, the more pulses the ignition coil generates, resulting in a higher displayed RPM value on the gauge.
20
5
Share

What are the consequences of having different tire tread patterns?

Having different tire tread patterns on a car can result in varying grip capabilities for each tire, leading to the vehicle pulling to one side while driving. Below is a relevant introduction about car tire replacement: 1. Replacement Timing: As the tread wears down and the degree of wear increases, it means the vehicle's braking distance will also be affected. Therefore, for safety reasons, tires should be replaced in advance. Generally, the thickness is around 8 millimeters, and when it wears down to 1.6 millimeters, it should be replaced. 2. How to Determine When Tires Should Be Replaced: Inspect the tread and the patterns on the sidewalls. If cracks appear, it indicates that the tires have severely aged and the remaining mileage they can handle is limited. In such cases, replacement should be considered as soon as possible.
15
5
Share

What are the reasons for a car consuming more and more fuel?

There may be several reasons why a car is consuming more and more fuel: 1. Poor driving habits: Bad driving habits such as squeezing into gaps, sudden stops and starts, and driving at high speeds in low gears can all lead to high fuel consumption. To save fuel, try to maintain a steady speed and rely on inertia for braking. 2. Engine carbon buildup: Carbon buildup in the engine can also cause high fuel consumption. Consider purchasing car cleaning products to remove the carbon deposits from the engine, which can help reduce fuel consumption. 3. Low tire pressure: Low tire pressure or insufficient tire inflation can also cause the car to consume more fuel. Before driving, check the tire inflation. There are instruments available to measure tire pressure. Timely inflation of the tires can help reduce fuel consumption. 4. Overloaded trunk: Carrying too many items in the trunk can also increase fuel consumption. Regularly clean out the trunk and remove unnecessary items to lighten the load on your car, which will naturally reduce fuel consumption.
10
4
Share

What Violations Do Electronic Police Capture?

Electronic police capture violations such as illegal U-turns, improper lane changes, occupying bus lanes, driving against traffic, running red/yellow lights, and solid line lane changes. Below are detailed introductions to other monitoring methods for detecting violations: 1. Traffic flow monitoring: Mounted on thin poles. Used to record traffic volume on road sections at different times of the day, submitting data to traffic management departments for adjusting traffic light intervals, not for recording vehicle violations. 2. Speed trap cameras: Installed at marked locations, relatively easy to spot, but may also be placed in concealed areas of highways, making them hard to identify. If such a camera flashes when passing on the highway, it indicates speeding. 3. Illegal parking cameras: Frequently seen in residential alleys and high-traffic areas, they can also monitor vehicles driving against traffic or parked illegally for extended periods, with an accuracy rate exceeding 90%. The lenses can zoom and automatically adjust image size, with a visible range of 200 meters. 4. Multiple cameras on a single pole: Typically installed between intersections, most commonly used on main roads with speed limits of 60 km/h. Some are hidden under bridges.
13
0
Share

Squealing Noise When Braking

Here are the specific reasons for sharp squealing noises when braking: 1. Improper brake pad installation: When installing new brake pads, the old brake disc was not resurfaced, resulting in a poor fit. A poor fit or installing new pads without resurfacing the old disc causes the new pads to directly rub against the uneven surface of the old disc, leading to uneven wear on the new pads. 2. Brake system malfunction: There may be a defect in the brake system itself, causing the brake pads to only partially contact the brake disc. This increases the pressure per unit area during braking, resulting in abnormal noises. It is recommended to inspect components such as the caliper and guide pins. 3. Presence of foreign objects: Foreign objects cause an uneven contact surface, leading to abnormal noises.
15
4
Share

Is It Safe to Buy a Car with an Expired Mortgage?

A car with an expired mortgage can be purchased, but it carries significant risks. If the mortgagor repays the loan on time, the mortgage right will not be enforced. However, if the mortgagor fails to repay the loan on schedule, after the debt repayment period expires, the mortgagee can apply to auction the car to repay the debt. In this case, the buyer can only demand a refund from the mortgagor and has no right to refuse the auction. Additional Information: 1. Legality of Mortgaged Cars: Mortgaged cars are divided into fully paid mortgaged cars and non-fully paid mortgaged cars. A fully paid mortgaged car is one where the owner is unwilling or unable to repay the financial company and does not cooperate with the transfer of ownership. The financial company legally transfers the debt, making such a mortgaged car safe and legal to purchase. A non-fully paid mortgaged car is still under mortgage status with the vehicle management office and the bank. Such cars should be purchased with caution, as they may eventually be seized if the owner fails to repay the car loan. 2. Sources of Mortgaged Cars: Mortgaged cars are properties pledged by owners or homeowners when they urgently need cash and take loans from financial institutions. There are two main sources of mortgaged cars: one comes from state-recognized investment companies, guarantee companies, or pawnshops, and the other originates from private financial companies as loan collateral.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.