What is the fuel consumption per 100 kilometers of the Feizhi 150?

2 Answers
NathanLee
07/29/25 8:41am
The fuel consumption per 100 kilometers of the Feizhi 150 is approximately 1.8 liters. The actual fuel consumption may vary due to objective factors such as whether the vehicle is in the break-in period, daily driving conditions, individual driving habits, and vehicle load. Taking the Feizhi YS150 as an example: its length, width, and height are 2015mm, 745mm, and 1095mm respectively, with a wheelbase of 1330mm, a seat height of 795mm, a curb weight of 128kg, a fuel tank capacity of 14L, a front tire specification of 2.75-18M42P, and a rear tire specification of 100/80-18M.
Was this review help?
12
4
Share
AutumnRose
08/11/25 6:15pm
As a 150cc sport motorcycle, the Yamaha FZ150 has an official fuel consumption data of approximately 2.2 to 2.5 liters per 100 kilometers, which is quite fuel-efficient. However, in actual usage, it fluctuates significantly depending on how you ride—steady driving on suburban roads can keep it around 2.5 liters, but in city traffic or with sudden acceleration, it may jump above 3 liters. This is related to its single-cylinder engine design and fuel injection system, which optimize efficiency, but if you frequently carry luggage or change lanes, fuel consumption increases. I recommend new owners check tire pressure and chain tension, as these maintenance details can help keep fuel consumption at a lower level. Overall, the FZ150's fuel efficiency performance is good, being both economical and practical.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

How to Set Cruise Control on Volkswagen Magotan?

To set cruise control on Volkswagen Magotan: 1. Press the power button to activate the cruise control system; 2. Accelerate to the desired speed, press the set button and release the accelerator to maintain the current speed. The Volkswagen Magotan is a mid-sized 4-door 5-seater sedan with body dimensions of 4865mm in length, 1832mm in width, 1471mm in height, and a wheelbase of 2871mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. The drivetrain is front-wheel drive, with a front MacPherson independent suspension and a rear multi-link independent suspension.
18
3
Share

How to Close the Hood of a Ford Focus?

To close the hood of a Ford Focus, follow these steps: 1. Retract the support rod; 2. Lower the hood to a height of 20 cm and release both hands; 3. Let the hood fall freely to lock into place. The Ford Focus is a compact 4-door 5-seater sedan with the following dimensions: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, and a fuel tank capacity of 53 liters. The Focus is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 90 kW at 6500 rpm and a maximum torque of 153 Nm. It features front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
14
0
Share

What does suspension stiffness mean?

Suspension stiffness refers to the comfort level of a vehicle's suspension. The functions of the suspension are: 1. To provide cushioning when the vehicle passes over uneven ground; 2. To ensure that the wheels move within a fixed angle, maintaining steering stability; 3. To support the weight of the wheels; 4. To maintain good contact between the wheels and the ground, ensuring that the driving force and braking force generated between the wheels and the ground are accurately transmitted to the vehicle body. A vehicle's suspension is the general term for all force-transmitting connecting devices between the vehicle's frame and the axle or wheels. It is divided into: 1. Non-independent suspension system: Both wheels are connected by a solid axle, and the wheels and axle are suspended together under the frame or body via an elastic suspension system; 2. Independent suspension system: Each wheel is individually suspended under the frame or body via an elastic suspension system.
13
0
Share

What is the length of the Audi A6?

The length of the Audi A6 is 4951mm, with a width of 1886mm and a height of 1483mm. It has a fuel tank capacity of 73 liters and a trunk capacity ranging from 565 to 1680 liters. The tire specification is 245/45R19, and it features front-wheel drive with a front-engine layout. Both the front and rear suspensions utilize a five-link independent suspension system. The Audi A6 is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 140 kilowatts at 5000 to 6400 rpm and a maximum torque of 320 Newton-meters at 1370 to 4500 rpm.
8
4
Share

How to Adjust the Ignition Advance Angle?

Ignition advance angle can be adjusted using a vacuum gauge. During adjustment, it is necessary to refer to the data of the highest vacuum value of the car engine in idle state. You can align the fuel supply point with the high-pressure pipe's fuel outlet according to the scale. Ignition advance means that the spark plug fires before the piston reaches the compression top dead center, igniting the combustible mixture in the combustion chamber. The angle through which the crankshaft rotates from the ignition moment until the piston reaches the compression top dead center is called the ignition advance angle. When the gasoline engine maintains a constant throttle opening, speed, and mixture concentration, the engine power and fuel consumption rate change with the variation of the ignition advance angle. For each operating condition of the engine, there exists an optimal ignition advance angle.
15
5
Share

What Causes the Lavida Engine to Lose Power and Shake During Acceleration?

Lavida engine power loss and shaking during acceleration are caused by carbon buildup. Reasons for carbon buildup: High gear, low RPM, and heavy engine load cause the governor to control the high-pressure pump to supply more fuel, while the intake air volume struggles to increase accordingly. Fuel burns with relatively insufficient oxygen, resulting in incomplete combustion of carbon, which leads to carbon deposits. Carbon buildup affects intake and exhaust, adheres to pistons and fuel injectors, impairing fuel atomization and further affecting combustion, creating a vicious cycle. Carbon cleaning treatment: Use cleaning fuel additives during daily driving to prevent carbon buildup. How to avoid carbon buildup: To prevent carbon deposits, ensure correct engine fuel supply and valve timing, and try to operate the engine under rated conditions, avoiding prolonged low-speed operation.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.