What is the fuel consumption per 100 kilometers of the Changan Yidong Plus?

1 Answers
VonBradley
07/25/25 1:31pm
The fuel consumption per 100 kilometers of the Changan Yidong Plus is approximately 5.6L to 5.8L. The calculation method for fuel consumption per 100 kilometers is: the amount of fuel consumed divided by the distance traveled multiplied by 100. The fuel consumption per 100 kilometers is an important indicator to measure the fuel economy of a car. Generally, the car's onboard computer will provide an average fuel consumption value, which is displayed on the dashboard, but it usually differs slightly from the actual fuel consumption. Taking the Yidong 2021 Plus 1.6L GDI CVT Elite model as an example: it is a compact car under Changan Automobile, equipped with a 1.6L naturally aspirated engine and a CVT (simulated 8-speed) transmission. In terms of body dimensions, the car has a length of 4730 mm, a width of 1820 mm, and a height of 1505 mm, and the body type is a 4-door, 5-seater sedan.
Was this review help?
2
5
Share
More Forum Discussions

What to Do If OBD Fails Annual Inspection?

OBD failure should be addressed by upgrading the vehicle's system at a 4S shop. OBD stands for On-Board Diagnostics system inspection. Starting from November 1, 2019, the entire process of tailpipe emission testing has been under OBD dynamic monitoring. OBD refers to the On-Board Diagnostics system inspection. If the vehicle has any emission control-related fault alarms or abnormal connections between OBD and the diagnostic tool, it may result in inspection failure. Vehicles purchased a long time ago are recommended to have their OBD systems upgraded at a 4S shop. Below is additional information on the causes of OBD failure and remedial measures: 1. Outdated OBD system; 2. Malfunctioning OBD system sensors; 3. Engine failure in the vehicle. Methods to reduce OBD failure include: 1. Refuel at reputable gas stations and use the fuel grade specified by the manufacturer; 2. For diesel vehicles equipped with selective catalytic reduction devices, use qualified urea produced by reputable manufacturers; 3. When the OBD light is on, promptly take the vehicle to a 4S shop for repair; 4. Use the vehicle normally, avoiding overloading or exceeding limits; 5. Do not modify, block, or dismantle pollution control devices of the OBD system without authorization.
4
1
Share

How to Repair Minor Scratches on Car Leather?

To repair minor scratches on car leather, you can address it from the following two aspects: 1. Use toothpaste: Dampen a towel slightly, apply toothpaste to the towel, and rub the scratch firmly. This method can immediately remove shallow scratches and some residual paint marks from scrapes, but it is not suitable for deeper scratches. 2. Use car wax: This method is relatively simple. Apply car wax to the area with minor scratches, then soak a towel in warm water and repeatedly rub the waxed area several times. This will remove the minor scratches and, as an added benefit, enhance the gloss of the paint surface.
13
4
Share

What does the yellow pavement marking at the center of an intersection mean?

Yellow grid lines on the pavement indicate that all vehicles are strictly prohibited from stopping, whether temporarily or for an extended period, to prevent traffic congestion. Here is relevant information: 1. When there are vehicles stopped ahead of the yellow grid line, following vehicles must wait outside the yellow grid line until they confirm there is sufficient space ahead to proceed before crossing the grid line. 2. Yellow grid lines are painted in front of important state organs, military facilities, large enterprises, and public transportation hubs to ensure that vehicles can enter and exit without being blocked by congestion at the entrance. 3. The grid lines are yellow, and occupying them while parking is prohibited.
3
5
Share

Does Using the Heater Consume More Fuel?

Using the heater does not consume more fuel. This is because the heater utilizes the car's own heat cycle and does not require the compressor to work, thus it does not consume additional fuel. Here are some precautions when using the heater without consuming extra fuel: 1. Wait for a while after starting the car before turning on the heater: You should wait for 3-5 minutes after starting the car, allowing the water temperature to rise before turning on the heater. 2. Set the air circulation to internal mode: Setting the air conditioning to internal circulation mode will quickly increase the temperature inside the car. Once the car feels warm, switch to external circulation to help with air circulation inside the car. 3. Adjust the heater temperature: Setting the heater temperature to 23 degrees Celsius is most suitable.
18
1
Share

What to Do When the Motorcycle Engine Warning Light Comes On?

Here are the methods to address when the motorcycle engine warning light comes on: 1. Method One: Check and eliminate wiring faults. First, inspect the connection from the generator excitation winding lead through the brush to the regulator. Next, check the connection from the generator stator three-phase winding lead through the diode and neutral point to the regulator. Then, examine the wiring of the indicator light, switch, regulator, and battery. Check for grounding, open circuits, or unreliable connections in these wires and terminals. 2. Method Two: Check and eliminate regulator faults. If the regulator is confirmed to be faulty, first identify the issue. Generally, start by checking whether the contacts are burned, dirty, or not conducting, and whether the contact return spring is failing. 3. Method Three: The return spring adjusts the voltage level. Extending the spring increases the voltage, while shortening it decreases the voltage. Additionally, check the regulator coil and connections for any open or short circuits. The regulator should be adjusted on specialized equipment.
5
5
Share

What are the characteristics of a squeaky stabilizer bar bushing?

Motorcycle lack of power is usually caused by the following reasons: 1. The motorcycle may have been driven at high temperatures for a long time, meaning it was driven in low gear for too long; 2. The cylinder head gasket is damaged and leaking, resulting in insufficient pressure in the cylinder; 3. The quality of the gasoline is poor, possibly containing too many impurities; 4. The throttle linkage did not return to its original position after being opened and remained in the closed state. Below are the inspection and repair steps for motorcycle lack of power: 1. Check if the air filter is clean: mainly check if the filter element is clean. If it is covered in dust, it can be washed with soapy water, dried, and then reinstalled. 2. Check if the cylinder pressure is normal: you can unscrew the spark plug and press it firmly with your thumb, then step on the starter pedal. If you cannot hold it no matter how hard you press, then it is normal.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.