What is the fuel consumption per 100 kilometers for Volkswagen?

1 Answers
VonRonan
07/29/25 3:29pm
The comprehensive fuel consumption of the Volkswagen Bora is 5.3-5.9L/100km. Currently, there are 15 models of the Volkswagen Bora on sale. The DSG Comfort Smart Edition and DSG Elite Smart Edition have a comprehensive fuel consumption of 5.3L/100km. The DSG Elite Smart Edition and DSG Luxury Smart Edition have a comprehensive fuel consumption of 5.5L/100km. The Automatic 30th Anniversary Edition, Automatic Comfort Smart Edition, Automatic Elite Smart Edition, Automatic Luxury Smart Edition, and Automatic Fashion Smart Edition have a comprehensive fuel consumption of 5.7L/100km. The Manual Fashion Smart Edition, Manual Comfort Smart Edition, Manual Fashion Type VI, and Manual Leading Type VI have a comprehensive fuel consumption of 5.8L/100km. The Automatic Fashion Type VI and Automatic Leading Type VI have a comprehensive fuel consumption of 5.9L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 5.3-8.8L/100km. When driving, the following five tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration and braking, early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking, thereby improving fuel efficiency. By anticipating road conditions and using slow, even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units, relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Regular oil changes can reduce carbon buildup (carbon buildup can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Close windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
Was this review help?
8
4
Share
More Forum Discussions

How Many Years of Experience Do Beginners Need to Drive on Highways?

According to legal regulations, novice drivers can only drive on highways after holding a driver's license for one year. If the driver's license has been held for less than one year, the driver must be accompanied by someone who has held a driver's license for more than three years to drive on highways. During the probationary period, probationary drivers must display a probationary sign on their vehicles. Otherwise, they will be penalized. Drivers in the probationary period are not allowed to drive buses, commercial passenger vehicles, police cars, fire trucks, or other similar vehicles. According to Article 75 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": When driving a motor vehicle on a highway during the probationary period, the driver must be accompanied by someone who has held a corresponding or higher-level driver's license for more than three years. Legal Basis: Article 75 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": During the probationary period, motor vehicle drivers are not allowed to drive passenger cars, commercial passenger vehicles, police cars, fire trucks, ambulances, engineering rescue vehicles, or motor vehicles carrying explosives, flammable and explosive chemicals, toxic or radioactive substances; they are also not allowed to tow trailers. When driving a motor vehicle on a highway during the probationary period, the driver must be accompanied by someone who has held a corresponding or higher-level driver's license for more than three years. For drivers of small automatic passenger vehicles for the disabled, they can be accompanied by someone who holds a driver's license for small automatic passenger vehicles or higher.
6
5
Share

What to Do with China V After China VI Implementation?

If your vehicle is China V or China IV, the implementation of China VI will not affect its normal operation on the road, as vehicles purchased are subject to the emission standards at the time of purchase. As long as the vehicle meets the standards, it can continue to be driven. However, after the implementation of China VI, the resale value of China V new vehicles will decrease compared to before, increasing the cost of changing cars. The differences between China V and China VI are: Different carbon monoxide emission requirements: China V vehicles have a carbon monoxide content of 1000mg per kilometer; China VI vehicles have a carbon monoxide content of 500mg per kilometer. Different letter representations: China V is represented by V; China VI is represented by VI. 3. Different issuing departments: The China V standard was issued by the Ministry of Environmental Protection; the China VI standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine.
5
2
Share

When Can a New Car Be Driven on the Highway?

It is best to drive a new car on the highway after the break-in period. During the break-in period, the engine speed should be controlled at around 2,500 RPM, and the car should not remain in a single gear for too long. The speed and gear should be changed every few minutes to ensure that the gears are properly broken in and to prevent excessive wear on any single gear. Here are some methods to determine whether a car is new: Check the manufacturing date: The manufacturing date on the vehicle should match the date on the certificate of conformity, and it is usually difficult to alter. If the manufacturing date exceeds 15 days, the car is considered used. Inspect the brake discs: After driving more than 200 kilometers, brake pads typically leave noticeable marks on the brake discs. There is usually a gap of 1–2 millimeters between the brake pads and the outer edge of the brake discs.
11
4
Share

Will Running a Yellow Light Trigger a Camera?

Traffic cameras will photograph vehicles entering an intersection during a yellow light. According to the Road Traffic Safety Law, a yellow light serves as a warning, and motor vehicles should slow down when approaching an intersection. If your vehicle has already crossed the stop line when the yellow light activates, you may proceed through the intersection. If your vehicle has not yet crossed the stop line, you should slow down and come to a stop. Running a yellow light constitutes a violation of traffic signal regulations, punishable by a fine ranging from 20 to 200 yuan and 6 penalty points. (1) When the green light is on, vehicles and pedestrians are permitted to proceed, except that turning vehicles must not hinder the passage of straight-moving vehicles or pedestrians with the right of way; (2) When the yellow light is on, vehicles and pedestrians are prohibited from proceeding, except for vehicles that have already crossed the stop line and pedestrians already within the crosswalk, who may continue; (3) When the red light is on, vehicles and pedestrians are prohibited from proceeding.
15
1
Share

What is the difference between a comprehensive car dealership and a 4S store?

Comprehensive car dealerships and 4S stores differ in the following ways: 1. Different vehicle sources: The cars in comprehensive dealerships are purchased in bulk from 4S stores; 4S stores are a car franchise model centered around the 'four-in-one' concept, with vehicles provided directly by the manufacturer. 2. Different business scopes: Comprehensive dealerships only sell cars; 4S stores include sales, spare parts, after-sales service, and information feedback. The front bumper replaced at a 4S store is an original part. A car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle. The bumper consists of an outer panel, cushioning material, and a crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed from cold-rolled sheet metal pressed into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the frame longitudinal beams with screws.
2
2
Share

Where is the traction control switch on the Buick GL8?

The traction control switch on the Buick GL8 is located below the air conditioning screen on the center console. The Buick GL8's engine oil capacity is 4.2 to 4.5 liters. The functions of engine oil include: lubrication and anti-wear, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, and shock absorption. Taking the 2021 Buick GL8 as an example, it is an MPV with body dimensions of: length 5238mm, width 1878mm, height 1776mm, wheelbase 3088mm, fuel tank capacity 66 liters, and curb weight 1880kg. The 2021 Buick GL8 features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237PS, maximum power of 174kW, maximum torque of 350Nm, paired with a 9-speed automatic manual transmission.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.