What is the fuel consumption per 100 kilometers for the Tiida?

1 Answers
LeBraxton
07/29/25 6:49pm
The fuel consumption per 100 kilometers for the Tiida is 5.3-6.0L. Currently, there are 4 models on sale. Among them, the Tiida TIIDA-2021 CVT Intelligent Edition, CVT Cool Edition, and CVT Premium Edition have a fuel consumption of 5.3L per 100 kilometers; the manual Joy Edition has a fuel consumption of 6L per 100 kilometers. The above figures are the NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for combined driving conditions. The actual fuel consumption is higher than this value, ranging from 6.84-7.28L/100km. Among comparable models, the 2021 Excelle has a combined fuel consumption of 5.9L/100km, the 2022 Elantra has a combined fuel consumption of 5.3L/100km, and the 2021 MG6 has a combined fuel consumption of 6.2L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind direction, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, overtaking, or not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind direction: Driving against the wind or on windy days increases resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline is less likely to atomize, requiring more gasoline to burn, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
20
1
Share
More Forum Discussions

Which gear is the reverse gear in an automatic transmission?

In an automatic transmission car, the reverse gear is the R gear. Below is an introduction to the gears of an automatic transmission car: 1. P-Parking, the parking gear. When the car is parked and not in use, the gear is in this position, at which time the wheels are mechanically locked to prevent rolling; 2. R-Reverse, the reverse gear, used when reversing; 3. N-Neutral, the neutral gear, used when temporarily stopping the car. To prevent the car from rolling on a slope, always step on the brake; 4. D-Drive, the forward gear, also known as the driving gear, used when moving forward; 5. L-Low, the low gear. When going downhill or on a long slope, shifting to this gear limits the car's gear to the lowest gear (equivalent to the first gear in a manual transmission car), allowing the car to use engine power for braking when going downhill, so the driver does not have to step on the brake for a long time, which could cause the brake pads to overheat and lead to danger; 6. S-Sport, indicating sports mode. When shifting into this gear, the gears can be freely switched, but the shifting timing is delayed, keeping the engine at high speed for a period of time to increase the car's power.
1
4
Share

What are the classifications of ignition systems?

Ignition systems are divided into conventional ignition systems and electronic ignition systems. The ignition system is an important component of gasoline engines, and its performance significantly affects engine power, fuel consumption, and exhaust emissions. All equipment capable of generating an electric spark between the two electrodes of a spark plug is referred to as the engine's "ignition system." It typically consists of a battery, generator, distributor, ignition coil, and spark plug, among other components. More details are as follows: 1. In gasoline engines, when compression is near the top dead center, the combustible mixture is ignited by the spark plug, thereby burning to perform external work. For this reason, gasoline engine combustion chambers are equipped with spark plugs. 2. The function of the ignition system is to generate an electric spark with sufficient energy between the two electrodes of the spark plug in accordance with the working sequence of the cylinders.
5
4
Share

Does Changing Car Wheels Affect Annual Inspection?

Replacing car wheels with different ones from the original will affect the annual inspection, while using identical replacements will not. Here are some details about vehicle annual inspections: 1. Any unauthorized modifications to a vehicle's chassis, engine, suspension, transmission system, steering system, tires and wheels, lights, body color painting, exterior structure, or any technical data that does not match the specifications announced by the State Council's automotive product authority are considered modifications. 2. Vehicle annual inspection is a mandatory examination for all vehicles, akin to a health check-up for cars. It aims to promptly identify and eliminate potential safety hazards, thereby reducing the occurrence of traffic accidents, commonly referred to as vehicle inspection.
11
5
Share

Do Brake Pads Need to Be Replaced When Changing Brake Discs?

Brake discs and brake pads do not need to be replaced together. Below is an introduction to brake discs and brake pads: 1. The replacement of brake discs depends on their thickness and wear condition. Brake discs are a crucial component of the braking system, which can be categorized into solid brake discs and ventilated discs based on their structure. 2. Brake pads, also known as brake linings, are critical safety components in a car's braking system. They consist of a steel plate, an adhesive heat insulation layer, and a friction block. Below are the maintenance methods for brake pads and brake discs: 1. Develop good driving habits. 2. Avoid emergency braking. 3. Regularly inspect brake pads and brake discs. 4. Check the thickness of the friction material. 5. Always use original equipment manufacturer (OEM) brake pads and brake discs when replacing them.
14
5
Share

What is the Detailed Explanation of Hybrid Vehicle Principles?

The following is a detailed explanation of hybrid vehicle principles: 1. At the beginning of vehicle operation, the battery is in a fully charged state, and its energy output can meet the vehicle's requirements, so the auxiliary power system does not need to work. 2. When the battery level drops below 60%, the auxiliary power system starts: when the vehicle's energy demand is high, the auxiliary power system and the battery pack simultaneously provide energy to the drive system; when the vehicle's energy demand is low, the auxiliary power system not only supplies energy to the drive system but also charges the battery pack. 3. Due to the presence of the battery pack, the engine operates under relatively stable conditions, thereby improving its emissions.
17
4
Share

What is the weight of the Changan Oshan X7?

The total weight of the Changan Oshan X7 is 1590 kilograms. Below are the detailed specifications of the Changan Oshan X7: 1. The Changan Oshan X7 is a 5-door, 5-seater compact SUV with body dimensions of 4705mm in length, 1860mm in width, 1720mm in height, and a wheelbase of 2780mm. 2. The Changan Oshan X7 is equipped with a 1.5T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum power of 131 kilowatts at 5500 rpm and a maximum torque of 265 Newton-meters at 4500 rpm. It features front-wheel drive. 3. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.