What is the fuel consumption per 100 kilometers for the Teana 2.0L?

2 Answers
CarmenLynn
07/24/25 3:15am
The combined fuel consumption of the Teana 2.0L is 5.9L/100km. Currently, there are three models of the Teana 2.0L available for sale: the Fashion Edition, the Intelligent Navigation Edition, and the Comfort Edition, all with a combined fuel consumption of 5.9L/100km. This data is measured under the NEDC test procedure for combined driving conditions. The actual fuel consumption is higher than this value, ranging from 7.0-8.0L/100km. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to burn, which increases fuel consumption. Additionally, in low temperatures, the car's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
9
2
Share
LaAubree
08/10/25 10:49pm
Speaking of the Teana 2.0L's fuel consumption per 100 kilometers, from a performance perspective, it generally ranges between 8 to 10 liters. The official test standard is around 8.5 liters, but actual usage varies with road conditions: in city traffic jams, it can easily rise to 11 or 12 liters, while steady highway driving can bring it down to under 7 liters. Key factors affecting fuel consumption include speed control, air conditioning usage, and vehicle weight; for example, using the AC in summer can add 1-2 liters. Engine efficiency is also crucial: regular maintenance like oil changes and air filter cleaning helps maintain stable fuel consumption; insufficient tire pressure can also waste extra fuel. By optimizing these factors, daily average consumption can be kept around 9 liters, making it a practical design for family use. Paying attention to these details can enhance the overall driving experience.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What are the three major components of the Buick Envision Plus?

The three major components of the Buick Envision Plus are the engine, transmission, and chassis. Here are the relevant details about the three major components of the Buick Envision Plus: 1. Engine: The 2020 Buick Envision offers two powertrain options: a 1.5T/2.0T turbocharged engine. The photographed model is equipped with a 1.5T engine, delivering a maximum power of 169 horsepower at 5600 rpm and a peak torque of 250 Nm between 1700-4400 rpm. The top speed is 190 km/h. It accelerates from 0-100 km/h in 10.3 seconds, with a combined fuel consumption of 6.6 liters per 100 km. The 2.0T engine produces 191 kW (260 horsepower), with a top speed of 210 km/h. It accelerates from 0-100 km/h in 8.2 seconds, with a fuel consumption of 8.8 liters per 100 km. 2. Transmission: The 2020 Envision 1.5T model is paired with a 7-speed dual-clutch transmission, while the 2.0T model is matched with a 9-speed automatic transmission. 3. Chassis: The Envision features a front MacPherson independent suspension and a rear multi-link independent suspension.
15
1
Share

How to Resolve the U112100 Fault Code?

U112100 fault code indicates a data bus loss, and a new battery needs to be replaced. Perform a power reset test; if the issue persists, reprogramming at a 4S shop is required. The solutions for the U112100 fault code are as follows: 1. First, remove the cover near the wiper and check whether the wiring harness of the engine and transmission is worn, whether the connectors of the engine control unit and transmission control unit are properly connected, and whether there is any water ingress in the connectors. 2. Ensure the wiring harness is intact and the control unit connectors are properly connected. Check that the brake control unit connectors are properly connected and the wiring harness is intact. Remove the trim panel on the left side of the dashboard and inspect the body wiring harness for any damage.
11
5
Share

What are the length and width of the 12th-generation Crown in meters?

The 12th-generation Crown adopts a design with a short front overhang and a long rear overhang, and this generation has also improved in space compared to the previous one. Its dimensions are 4840mm×1780mm×1470mm (length×width×height), with a wheelbase of 2850mm. More details about the 12th-generation Crown are as follows: 1. Detail one: The top-tier Toyota Crown 12 model is identical in appearance to the V6 model, and the interior also features a multifunctional steering wheel design. However, it integrates more functions with a greater number of buttons than the V6 version, equipped with a large-screen navigation system. The center console operation panel is basically the same as the V6 version, and it is expected that the functions will not differ significantly. 2. Detail two: The top-tier version pays more attention to the comfort of rear passengers, featuring a rear center armrest with wood trim design, integrating audio-visual entertainment control system and air conditioning control buttons. 3. Detail three: The new Crown offers two powertrain options in Japan: one combines a 4.3L V8 engine with a 6-speed automatic transmission and a four-wheel-drive system, while the other pairs a 4.6L V8 engine with an 8-speed CVT transmission, but only provides a two-wheel-drive system.
18
3
Share

How to Lift Up the Rear Seat of a Car?

To lift up the rear seat of a car, follow these steps: 1. Insert your hand into the gap between the seat cushion and the carpet. 2. Lift upward firmly until the wire beneath the seat cushion disengages from the plastic clips on the car body. 3. Repeat the same method on the other side of the seat cushion. 4. Align the seat cushion wire with the plastic clips on the car body, then press the seat cushion firmly until the wire snaps into the plastic clips to complete the installation.
19
5
Share

Motorcycle Valve Clearance Adjustment Method

Motorcycle valve clearance adjustment method is as follows: 1. Adjustment for overhead camshaft valves. Remove the magneto cover and valve chamber cover, rotate the magneto rotor counterclockwise to align the "T" mark on its outer circumference with the mark on the engine casing. At this point, the piston should be at top dead center of the compression stroke. Then, select a feeler gauge of the specified thickness and insert it into the valve clearance. If slight resistance is felt when pulling the gauge back and forth, the clearance is appropriate. If no resistance is felt, adjustment is needed. First, use a small wrench to turn the adjustment screw while pulling the feeler gauge to sense the resistance. Once the clearance is correct, tighten the adjustment nut. 2. Adjustment for side valve clearance. Side valve clearance refers to the gap between the valve stem end and the adjustment screw on the tappet. Remove the valve chamber cover and spark plug, then block the spark plug hole with your finger. Step on the kick starter until you feel air pressure, indicating the piston is in the compression stroke. Insert a screwdriver into the spark plug hole and slowly press the kick starter. When the screwdriver reaches its highest point, the piston is at top dead center. Then, check and adjust the valve clearance using the same method as for overhead camshaft valve clearance adjustment.
17
3
Share

What is the service life of a start-stop battery?

The service life of a start-stop battery is typically around 3-4 years. If it exceeds this period, it is necessary to frequently check the battery's working condition. Methods to determine symptoms of a damaged car battery are as follows: 1. The most noticeable phenomenon is the feedback when starting the car. If you feel that starting the car is quite difficult, it is likely due to battery aging. However, there are many other factors that can cause difficulty in starting, such as severe carbon buildup and abnormal spark plugs, so it is necessary to consider other conditions as well. 2. If, while experiencing difficulty starting the car, the horn is not as loud as before, it is likely because the battery has aged to a certain extent and needs to be replaced promptly. Additionally, the car's headlights may also be affected, resulting in dimmer light. 3. Another symptom is the battery fault light, which is the most intuitive indicator, as this light specifically reflects whether there is an issue with the battery. Therefore, when the battery fault light comes on, it undoubtedly indicates an abnormality, and it is necessary to promptly visit an auto repair shop for inspection. If the issue is due to a damaged battery, a new battery should be replaced.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.