···
Log in / Register

What is the fuel consumption per 100 kilometers for the Sylphy?

6Answers
MarcusLee
09/01/2025, 01:32:38 AM

Sylphy's comprehensive fuel consumption per 100 kilometers is 3.9-6.1L/100km. Actual driving fuel consumption is affected by multiple factors such as vehicle load, road conditions, driver's driving habits, weather and wind speed, and tire pressure. The method for calculating fuel consumption and related introductions on how to improve high fuel consumption are as follows: Method for calculating fuel consumption: You can determine fuel consumption by observing the fuel tank capacity on the car's dashboard, where F=full and E=empty. When the fuel tank capacity warning light turns red, record the current mileage, then record the amount of fuel added. When the gasoline is consumed again, record the mileage once more. Subtract the initially recorded data from the later mileage, then divide by the fuel amount to obtain the actual fuel consumption. Methods to improve high fuel consumption: Drivers should correct bad driving habits, accelerate smoothly, avoid coasting in neutral, reduce vehicle load, and perform regular maintenance.

Was this review help?
110
Share
LeClaire
09/13/2025, 04:13:57 AM

I've been driving a Nissan Sylphy for three years, mainly for daily urban commuting. The average fuel consumption is around 5.5 liters per 100 kilometers, dropping to just over 5 liters on highways but rising to over 6 liters during peak-hour traffic jams. Many factors affect this, such as my driving habits - maintaining a steady speed and avoiding sudden acceleration and frequent braking saves a lot on fuel costs. Air conditioning usage also plays a role; using the AC in summer increases consumption by about 0.5 liters. Regular maintenance is crucial for fuel efficiency - I change the engine oil and air filter every 5,000 kilometers and keep tire pressure at standard levels. These small measures help maintain long-term efficiency. Overall, the Sylphy is quite fuel-efficient compared to friends' similar-class vehicles, saving thousands in fuel costs annually and significantly reducing car maintenance expenses.

Was this review help?
5
Share
Expand All
McArya
10/27/2025, 10:13:04 PM

As someone who frequently travels long distances for business, the Sylphy is my most trusted means of transportation, with fuel consumption typically fluctuating around 5.3 liters per 100 kilometers, depending on road conditions and load. The car's fuel efficiency is its core advantage, especially during fluctuating fuel prices, as the low consumption directly reduces my living expenses. With economical driving, a full tank can cover over 700 kilometers, making fuel costs for a business trip less than 200 yuan. The stable fuel consumption in the 5-liter range is also thanks to the CVT transmission design, which ensures smooth gear shifts and minimizes fuel wastage. I make it a habit to check tire pressure and filters weekly to avoid unnecessary consumption. Overall, the Sylphy's low fuel consumption makes budgeting easier, making it ideal for commuters who prioritize savings.

Was this review help?
13
Share
Expand All
ArabellaRose
12/10/2025, 09:28:56 PM

The Sylphy's fuel efficiency is indeed outstanding, with the official claimed fuel consumption ranging between 4.9 to 5.7 liters per 100 kilometers, while actual owner feedback averages around 5 liters. This is attributed to the high compression ratio of the 1.6L engine and its intelligent management system. The engine optimizes combustion efficiency, and the CVT transmission reduces friction losses, collectively ensuring low fuel consumption during smooth driving. Gentle steering and gradual acceleration are key while driving; fuel consumption may be slightly higher during cold starts or short trips, so preheating the engine is recommended to improve efficiency. Overall, these figures lead among compact cars, making it highly reliable for daily use.

Was this review help?
10
Share
Expand All
LaTimothy
01/30/2026, 10:34:05 PM

As a working professional born in the 1990s, the Nissan Sylphy is my first commuter car, with fuel consumption generally around 6 liters per 100 kilometers. It occasionally increases in congested city traffic but remains stable below 5.5 liters on highways. The fuel efficiency is quite appealing to us young people, especially when going on weekend trips with friends—filling up the tank for long drives doesn’t make me worry about fuel costs. Compared to my friends’ cars, the Sylphy saves me an extra 200-300 yuan per month, which I can spend on snacks or a movie. However, driving habits matter—when I occasionally drive aggressively, fuel consumption spikes, so I’ve gradually adopted a steady-speed habit. The Sylphy’s fuel performance is well-suited for urban life, being both economical and practical.

Was this review help?
12
Share
Expand All
Isabel
04/25/2026, 04:22:22 PM

Having driven for over a decade, my choice of the Sylphy has never exceeded 6 liters per 100 kilometers in fuel consumption, with normal usage averaging around 5.2 liters. This is largely attributed to regular maintenance and sensible driving. Maintenance is the key—cleaning engine carbon deposits and replacing the air filter every six months, along with ensuring fresh engine oil, can reduce fuel consumption by 0.3 liters. In terms of driving, maintaining a gentle start, minimizing sudden braking, and using cruise control on highways to stabilize speed are crucial. Air conditioning in summer increases consumption, so I keep it at a moderate temperature. Low fuel consumption also extends the car's lifespan, making it cost-effective and hassle-free in the long run. The Sylphy is indeed a reliable choice.

Was this review help?
3
Share
Expand All
More Q&A

Will replacing the tie rod end affect the car?

Replacing the tie rod end will not affect the car. The function of the tie rod end: The tie rod end is a rod with a ball joint housing. The ball joint of the steering spindle is placed inside the ball joint housing, and the ball joint is hinged with the edge of the shaft hole of the ball joint housing through the ball joint seat at its front end. The needle roller between the ball joint seat and the steering spindle is embedded in the groove of the inner hole surface of the ball joint seat, which can reduce the wear of the ball joint and improve the tensile resistance of the spindle. Symptoms of a damaged tie rod end: Rattling noise on bumpy roads; unstable car, swaying left and right; brake deviation; steering failure; excessive play in the ball joint, which can easily break under impact load; loose tie rod end can cause steering deviation, tire wear, steering wheel vibration, and in severe cases, the ball joint may fall off, leading to sudden wheel detachment.
118
Share

What is the new car inspection called?

New car inspection is called PDI. The full name of "PDI" is "Pre-Delivery-Inspection". Generally, 4S stores will conduct a free PDI inspection before vehicle delivery to ensure the complete safety and performance of the new car for customers. PDI inspection items: Roughly include the exterior of the vehicle: appearance, paint surface, tire pressure (including the spare tire), door opening and closing, and even child locks, etc.; inside the engine compartment: battery status, fluid levels, etc. Steps of PDI inspection: First, the technician in the store will take a PDI work order, which contains more than 70 inspection items in total. The PDI standards of different brands may vary slightly, but at least the process on the inspection list should be completed. You can refuse to sign if the inspection is not done. Special attention: once you sign, it means you agree with the condition of the vehicle at the time of sale.
108
Share

Is It Normal for a BMW Fan to Keep Running at Low Speed?

Engine fans continuously operating at low speed is due to the engine temperature, meaning the coolant temperature does not reach the level required for high-speed operation. This is influenced by the current external environment, particularly the weather. It's normal for the fan not to run at high speed now, but it might do so during extremely hot summer days. Methods to Address Overheating Engine Coolant: 1. Overheating Due to Insufficient Coolant: In this case, you need to add water. However, to prevent engine damage, do not add water immediately. Typically, you should first open the car's hood, then the engine cover to allow ventilation and heat dissipation. Only add water after the coolant temperature has decreased. 2. Overheating Caused by Water Pump Failure: Possible causes include seized bearings or damaged impeller blades. Seized bearings are less likely, but if the impeller is damaged, it should be replaced.
115
Share

Where can yellow-label vehicles be inspected?

Yellow-label vehicle inspection locations will be notified after applying at the certification office. Yellow-label vehicle certification standards: The certification of yellow-label vehicles is based on exhaust emission standards, specifically China's National I and National III standards. China's 'Limits and Measurement Methods for Emissions from Light-duty Vehicles (I)' implemented in 2001 is equivalent to Euro I standards. The 'Limits and Measurement Methods for Emissions from Light-duty Vehicles (III)' implemented in 2007 is equivalent to Euro III standards. Yellow-label vehicle inspection procedures: Vehicle owners should bring their motor vehicle license and the 'Application Form for Subsidy Funds for Old Vehicle Replacement' to the yellow-label vehicle certification office to apply; The yellow-label vehicle certification office will arrange specific inspection times and locations based on the owner's application and notify the applicant according to centralized and unified principles; The applicant should go to the designated inspection line at the scheduled time for testing, paying only for the exhaust emission test. Inspection line personnel must not refuse inspection for any reason.
120
Share

Can the rear wheel of Jiajue N19 be widened?

Jiajue N19 rear wheel can be widened. Basic introduction to motorcycles: Motorcycles are two-wheeled or three-wheeled vehicles driven by gasoline engines and steered by handlebars to control the front wheel. They are lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serve as sports equipment. Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc. Tires: Tires are circular elastic rubber products assembled on various vehicles or machinery for rolling on the ground. Usually mounted on metal rims, they support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
107
Share

What is the reason for the brake occasionally being hard to press down?

The reasons why the brake is hard to press are as follows: 1. Related to pressing the brake before turning off the engine: The car's braking system can only perform at its best when the engine is running, and the brake booster is the key component that enables vehicle braking. The force applied to the pedal is amplified by it. When the engine is off, the brake booster also stops working. Generally, pressing the brake pedal three times will exhaust its remaining vacuum force, making the brake feel very hard. 2. Leakage or malfunction of the brake booster: If the car's brake booster is leaking or malfunctioning, and you did not press the brake pedal after turning off the engine, or you find the brake pedal hard to press while driving, it is likely due to a brake booster failure. This could be caused by a vacuum tube leak or blockage in the brake booster. In such cases, if this issue is noticed before driving, it is best to send the car to a repair shop for inspection immediately.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.