What is the fuel consumption per 100 kilometers for the Rolls-Royce Phantom?

1 Answers
VonMariana
07/30/25 3:54am
The combined fuel consumption of the Rolls-Royce Phantom is 14.2-14.5L/100km. Currently, there are two models of this vehicle on sale. The standard wheelbase version has a combined fuel consumption of 14.2L/100km, while the long wheelbase version has a combined fuel consumption of 14.5L/100km. The above figures are based on the NEDC combined cycle, which measures fuel consumption under standardized test conditions. The actual fuel consumption is higher than this value, approximately around 15.75L/100km. Automobile fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power and require more gasoline for combustion. Heavier vehicles also consume more fuel as greater mass requires more driving torque. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and consequently fuel consumption. Natural wind: Driving against the wind or during windy conditions increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, injected gasoline does not atomize easily during cold starts, requiring more fuel for combustion, thus increasing consumption. Additionally, at lower temperatures, the engine's computer may control higher idle speeds to warm up the engine, which also increases fuel consumption.
Was this review help?
19
0
Share
More Forum Discussions

Is the Accord Hybrid eligible for green license plates?

The Accord Hybrid is not eligible for green license plates. The Accord Hybrid is a gasoline-electric hybrid model, which is classified as an energy-efficient vehicle in China and does not qualify as a new energy vehicle. Therefore, during the vehicle registration process, it cannot benefit from new energy policies and is required to use blue license plates, the same as those for conventional fuel-powered vehicles. In terms of exterior features, the Accord offers a full LED headlight assembly, LED front fog lights, headlight height adjustment, power-adjustable, heated, and folding exterior rearview mirrors, and chrome-plated dual exhaust outlets. Regarding dimensions, the Accord measures 4893 mm in length, 1862 mm in width, and 1449 mm in height, with a wheelbase of 2830 mm.
20
0
Share

What is the function of OBD?

OBD is the On-Board Diagnostics system. This system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. When a system malfunction occurs, the malfunction indicator light or check engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. Through a specific procedure, the fault code can be read from the PCM. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault. The OBD device monitors multiple systems and components, including the engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, EGR, etc.
3
1
Share

How to Determine if a Used Car is an Accident Vehicle?

Methods to determine if a used car is an accident vehicle: 1. Check the car paint—scratches on the car can be identified by examining the paint. Light scratches can be concealed with a polishing machine, while deep scratches require repainting. 2. Inspect the front and rear bumpers—evidence of accidents can often be found on the bumpers. Open the hood and use a flashlight to check for any damage or welding marks. 3. Examine the engine compartment—look for signs of screws being turned or any abnormal wrinkles or dents. 4. Check the A, B, and C pillars—if these are deformed, it indicates a significant accident. During inspection, first observe for obvious bumps, then remove the door frame seal to check if the welding spots are neat.
12
2
Share

How does the rotary distributor fuel injection pump supply fuel?

The fuel supply method of the rotary distributor fuel injection pump: During operation, clean diesel from the diesel filter enters the injection pump, where it is pressurized by the vane-type transfer pump (secondary pumping). The low-pressure diesel is then divided into two paths and enters the fuel chamber of the distributor pump. The diesel in the distributor pump is pressurized by the plunger, then flows through the central oil passage of the distributor plunger, distribution holes, delivery valve, and high-pressure fuel lines until it reaches the injector. The rotary distributor fuel injection pump is a type of plunger fuel injection pump. Its characteristic is that it uses a single set of plungers to pump fuel, with the pumped fuel directed to different cylinders via a rotating mechanism, ensuring balanced fuel supply to each cylinder. The main difference between the rotary distributor fuel injection pump and other types of plunger fuel injection pumps is that it uses one set of plungers to supply fuel to all cylinders, whereas other types of plunger fuel injection pumps use a separate set of plungers for each cylinder.
17
4
Share

What engine does the RAV4 Rongfang use?

RAV4 Rongfang is equipped with two engines in total, one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine. The maximum power of the 2.0-liter naturally aspirated engine is 111 kilowatts, and the maximum torque is 192 Newton-meters. The maximum power of the 2.5-liter naturally aspirated engine is 132 kilowatts, and the maximum torque is 234 Newton-meters. In terms of body dimensions, the RAV4 Rongfang measures 4600 millimeters in length, 1855 millimeters in width, and 1680 millimeters in height, with a wheelbase of 2690 millimeters. For the suspension, the RAV4 Rongfang uses a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear.
8
5
Share

What is the method for extending the rear seats of a BMW X1?

Reach under the seat cushion and forcefully lift the front part upward until the front buckle is released. This action needs to be performed once on both the left and right front sections. After lifting the front part, insert your left hand under the side, push the seat cushion toward the backrest with your right hand, and lift the rear part with your left hand to remove the seat cushion. Once the seat cushion is removed, you will see four fixing points on the floor. The front two are recessed and hidden, while the rear two are protruding hook structures. Simply replace it with a larger seat cushion.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.