What is the fuel consumption per 100 kilometers for the Luxgen 2.2t?

2 Answers
LePaul
08/29/25 8:02am
The Luxgen 2.2t has a fuel consumption of approximately 12 liters per 100 kilometers. The three major factors affecting fuel consumption are as follows: Rough roads increase fuel consumption: Poor road conditions or uneven surfaces force the vehicle to operate in lower gears for extended periods, inevitably increasing fuel consumption. Using the trunk as storage increases fuel consumption: Treating the trunk as a storage space and filling it with unnecessary items adds weight to the vehicle. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in weight can lead to a corresponding decrease in fuel consumption by several percentage points. Incorrect driving habits can double or triple fuel consumption: Improper driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.
Was this review help?
19
4
Share
MacCourtney
09/11/25 5:32am
I've been driving a Luxgen 2.2T for several years and found the average fuel consumption is around 12 to 14 liters per 100 kilometers. During city commutes, it often rises to 15 liters, especially in summer traffic jams with the AC on, which can add about 1 liter to the consumption. On highways, maintaining a steady speed can bring it down to just over 10 liters. Many factors affect this: for example, low tire pressure or carrying heavy loads can easily increase consumption by 0.5 liters. Regular maintenance is crucial—changing the air filter and engine oil on schedule can improve efficiency. I personally drive with gentle acceleration and avoid sudden braking, which saves fuel and is easier on the car. Overall, this engine offers strong performance, but fuel costs aren't cheap. If you frequently drive in the city, you might end up spending a few hundred more on fuel each month.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

Why can't the BYD Surui turn off?

It may be due to a malfunction in the ignition lock cylinder. Damage to the ignition lock cylinder prevents the vehicle from receiving the signal to turn off from the ignition key, resulting in the inability to shut down the engine. Below is some related information about the BYD Surui: 1. Exterior: The Surui features a more stylish and sophisticated design, with a front face that integrates a dual-chrome bar design with projector headlights. The ruby-like embedded LED taillights perfectly connect with the waistline that runs from front to rear, exuding a sporty and fashionable feel. The dazzling rear brand-illuminated logo showcases modern technological beauty, with an even more captivating effect at night, meeting personalized demands. The side and rear of the Surui also adopt a minimalist design style, with simple lines creating a cohesive visual effect. 2. Interior: The Surui's black and beige dual-tone interior offers a harmonious combination, with high-gloss piano black finishes that are refined and elegant, highlighting both fashion and technology. The new multifunction steering wheel integrates multimedia controls, instrument function settings, cruise control, and other shortcut keys for smart and convenient operation. The 7-inch high-definition capacitive touchscreen combines features such as in-car digital TV, intelligent noise-canceling radio, DVD, USB, SD, AUX, Bluetooth phone, and Bluetooth music, making entertainment and information easily accessible.
12
4
Share

What is the reason for the car air conditioning system not leaking during pressure testing but leaking during refrigerant charging?

Car air conditioning systems may leak during refrigerant charging due to damage at the refrigerant tube's charging port. Below is relevant information about car air conditioning systems: 1. Air Conditioning Layout: Different types of air conditioning systems have varying layouts. Currently, the most widely used in passenger cars is the integrated heating and cooling air conditioning system. Its layout involves assembling components such as the evaporator, heater core, centrifugal blower, and control mechanisms into a single unit, referred to as the air conditioning assembly. 2. Air Conditioning Components: Modern air conditioning systems consist of a refrigeration system, heating system, ventilation and air purification devices, and a control system. Generally, car air conditioning systems mainly include components such as the compressor, electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, piping, condenser fan, vacuum solenoid valve, idle speed controller, and control system. Car air conditioning systems are divided into high-pressure and low-pressure lines. The high-pressure side includes the compressor output side, high-pressure lines, condenser, receiver-drier, and liquid lines; the low-pressure side includes the evaporator, accumulator, suction line, compressor input side, and compressor oil sump.
2
1
Share

What are the reasons why the Accord cannot connect to Bluetooth?

Bluetooth invisibility, signal interference, mismatch, conflicts, and Bluetooth module failure can all cause the Honda Accord to fail to connect to Bluetooth. Bluetooth Invisibility: Either the phone's Bluetooth or the car's Bluetooth is not set to be discoverable, making it impossible to detect the corresponding Bluetooth signal. Signal Shielding or Interference: The vehicle's location may be subject to signal shielding or strong interference, leading to Bluetooth connection failure. Try reconnecting in an open area. Mismatch Between Phone Bluetooth and Car Bluetooth: The two Bluetooth systems may be incompatible, or the password input may have failed, preventing normal pairing. Try restarting the car's infotainment system or restoring factory settings, updating the phone to the latest version, and reconnecting. Conflict: Usually, after the car's Bluetooth and phone's Bluetooth are successfully connected, they will automatically reconnect when in proximity again, preventing new phone Bluetooth signals from connecting to the car's Bluetooth, causing a conflict. In the car's Bluetooth settings interface, delete the information of other connected devices and reconnect. Bluetooth Module Failure: If none of the above issues are present, it indicates a failure in the car's Bluetooth module. It needs to be inspected and replaced at a repair facility.
17
2
Share

How to Fix a Detached Car Headliner?

If the headliner is peeling near the edges, you can simply peel back the edge, spray adhesive, let it dry for 3-5 minutes, and then press it back into place. In this case, you need to remove the entire headliner, take off the old fabric, and clean off any aged foam from the surface. Prepare a new piece of headliner fabric and specialized headliner adhesive. Spray adhesive on both sides, let it dry for 3-5 minutes (until it's no longer tacky), and then press it into place.
15
4
Share

What is the Iveco Daily?

Iveco Daily is a commercial vehicle under the Iveco brand, equipped with an automatic transmission to meet the needs of business reception. The following is a related introduction to the Iveco Daily: 1. Vehicle characteristics: The overall design is more youthful, with a large mesh grille at the front paired with sleek headlights, making it very appealing. The newly launched Daily covers commercial vehicles, vans, light trucks, and special-purpose vehicle chassis with a total weight ranging from 4 to 7 tons. In terms of body dimensions, depending on the chassis model (vehicle type), the wheelbase of the NewDaily ranges from 3000mm up to a maximum of 4750mm, with a body length of up to 6190mm. Additionally, the height of the NewDaily van varies by size, with options of 1545mm, 1900mm, or 2100mm. 2. Interior: The dashboard of the new vehicle adopts a symmetrical design, and for ease of operation, elements such as the gear lever and functional area buttons are centrally located. Moreover, the Iveco NewDaily offers abundant storage spaces inside the cabin, including the inner door panels and dashboard areas. In terms of features, the new vehicle comes standard with ESP (Electronic Stability Program), lane departure warning, rearview camera, air suspension, multimedia entertainment system, Bluetooth phone, and GPS navigation system, with optional configurations available based on customer needs.
8
3
Share

How is the premium for new car damage insurance calculated?

The cost of car damage insurance is primarily calculated based on the method of coverage. Generally, the insured amount for car damage insurance is determined according to the purchase price of the new car. Insurance companies consider this method of coverage as full coverage, and in the event of a claim, the policyholder can receive compensation for actual losses. The insured amount for car damage insurance can also be determined based on the actual value at the time of coverage. The actual value refers to the purchase price of the new car minus the depreciation amount.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.