What is the fuel consumption per 100 kilometers for the Lavida 1.4T?

2 Answers
Myrtle
07/29/25 8:24am
The average fuel consumption per 100 kilometers for the Lavida 1.4T automatic transmission comfort version is 8.61L. Below is information about fuel consumption per 100 kilometers and how it is calculated: Information about fuel consumption per 100 kilometers: It refers to the fuel consumption of a vehicle traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator for the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated under specified speed conditions to determine the theoretical experimental fuel consumption data for the model. Calculation of fuel consumption: Fuel consumption per 100 kilometers is an indicator for vehicles, while operational fuel consumption is a standardized statistical specification. The slower the vehicle travels within the economic speed range, the higher the fuel consumption per 100 kilometers. Beyond the economic speed, the opposite is true. If the engine speed is maintained within the same safe range, the hourly fuel consumption remains the same regardless of the vehicle's speed. When calculating fuel consumption for highway driving and engineering transportation, the first two specifications are not suitable, and hourly fuel consumption calculation is more accurate.
Was this review help?
3
4
Share
RyanLynn
08/11/25 5:55pm
While researching the Lavida 1.4T, I noticed that its official fuel consumption is approximately 6.5 liters per 100 kilometers, based on the combined urban and highway data under the WLTC test standard. This is attributed to the efficient design of the 1.4-liter turbocharged engine. In actual driving, fuel consumption may fluctuate—rising above 8 liters in congested city traffic but dropping below 6 liters during steady highway cruising. Factors influencing this include driving habits, road conditions, and vehicle maintenance; for example, smooth acceleration can save fuel. My experience is that this car delivers solid power output, though its fuel consumption is slightly higher than naturally aspirated cars in the same class. Maintaining tire pressure within the standard range effectively keeps fuel consumption below 7 liters, making it both fuel-efficient and practical.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

How to Remove the Rearview Mirror of Mercedes-Benz C180?

Mercedes-Benz C180 Rearview Mirror Removal Method: Pinch the cylinder behind the rearview mirror and rotate it counterclockwise by 45 degrees to remove it. After removal, the base of the interior rearview mirror will still adhere to the front windshield. The car rearview mirror is an important safety component, and its mirror surface and shape are carefully designed. Therefore, the quality and installation of rearview mirrors are subject to corresponding industry standards and cannot be altered arbitrarily. The Mercedes-Benz C180 is a C-class model with a length, width, and height of 4783mm, 1810mm, and 1442mm respectively, and a wheelbase of 2920mm. The vehicle's exterior features include an electric sunroof, panoramic sunroof, sport version surround, aluminum alloy wheels, electric sliding side doors, electric suction doors, roof rack, remote start, and electric trunk.
14
4
Share

Is the BYD F0 equipped with a three-cylinder engine?

BYD F0 is equipped with a three-cylinder engine. This car is powered by a 1.0-liter three-cylinder naturally aspirated engine. Here are the relevant details: 1. The 1.0-liter naturally aspirated engine of the BYD F0 has 68 horsepower and a maximum torque of 90 Nm. The engine's maximum power is achieved at 6000 rpm, and the maximum torque is available between 4000 to 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 5-speed AMT transmission. 2. The AMT transmission is the earliest type of automatic transmission, known for its low cost. Its structure is almost identical to a manual transmission, except for the addition of a control mechanism. 3. The front suspension of the BYD F0 uses a MacPherson independent suspension, while the rear suspension employs a trailing arm suspension.
15
1
Share

Is Driving at 132 km/h Considered Speeding When the Speed Limit is 120 km/h?

Driving at 132 km/h is considered speeding when the speed limit is 120 km/h. Additional information: Penalties for speeding within different ranges: 1. Exceeding the speed limit by less than 10%: A warning will be issued; 2. On roads with a speed limit below 50 km/h: Exceeding the speed limit by 10% to less than 20% will result in a fine; exceeding by 20% to less than 50% will result in a fine; exceeding by 50% to less than 70% will result in a fine; exceeding by 70% or more will result in a fine; 3. On roads with a speed limit between 50 km/h and 80 km/h: Exceeding the speed limit by 10% to less than 20% will result in a fine; exceeding by 20% to less than 50% will result in a fine; exceeding by 50% to less than 70% will result in a fine; exceeding by 70% or more will result in a fine; 4. On roads with a speed limit between 80 km/h and 100 km/h: Exceeding the speed limit by 10% to less than 20% will result in a fine; exceeding by 20% to less than 50% will result in a fine; exceeding by 50% to less than 70% will result in a fine; exceeding by 70% or more will result in a fine; 5. On roads with a speed limit above 100 km/h: Exceeding the speed limit by 10% to less than 50% will result in a fine; exceeding by 50% to less than 70% will result in a fine; exceeding by 70% or more will result in a fine.
13
5
Share

Where is the Tiguan L's cabin air filter located?

Tiguan L's cabin air filter is located behind the glove compartment in front of the front passenger seat. You can see it by opening the glove compartment cover. The following are the functions of the cabin air filter: 1. Filter the air inside and outside the vehicle. 2. Improve the quality of incoming air to keep the air in the cabin clean. Below is extended information on the steps to replace the cabin air filter: 1. First, locate the position of the cabin air filter in your vehicle. 2. Loosen the fixing screws or clips of the cover plate and remove the cover plate where the cabin air filter is located. 3. Pull out the old cabin air filter and check its contamination level. If it is slightly dirty, you can use an air gun to blow away the dust or tap it to shake off the dust. If it is severely dirty or deformed, you need to replace it with a new one. 4. When installing the filter, make sure the side with writing faces outward. Insert the filter back in the same way, then cover and secure the cover plate.
15
0
Share

Where is the radiator located in a Chevrolet Cruze?

Chevrolet Cruze's radiator is located under the front hood, near the engine. The car radiator generally refers to the heat exchanger. As part of the automotive cooling system, the radiator in the engine's liquid cooling system consists of three main components: the inlet tank, outlet tank, and the core with main fins. The maintenance procedures for the car radiator are as follows: 1. Park the vehicle and turn off the engine: After the coolant temperature drops, open the expansion tank and add radiator cleaner; 2. Start the engine: Let it idle for 5-10 minutes after the cooling fan activates; 3. Turn off the engine and remove the front bumper: Ensure all mounting screws are loosened during disassembly, then carefully detach it from both ends toward the center to avoid breaking the fasteners; 4. Wait until the coolant has completely cooled: Flush out the radiator cleaner along with the old coolant, and finally replace it with new engine coolant.
4
0
Share

What Causes Windshield Wipers to Not Clean Properly?

There are several reasons why windshield wipers may not clean the glass effectively: 1. The windshield washer fluid has not been replaced for too long. Generally, the shelf life of windshield washer fluid is 2-3 years. Prolonged use of expired washer fluid not only results in ineffective cleaning by the wipers but may also cause noticeable scratches on the windshield, posing certain safety hazards. Therefore, regular replacement of windshield washer fluid is essential. 2. It could also be due to hardening of the wiper blades. It is advisable to inspect the wipers monthly to check for any signs of hardening. If hardening is detected, promptly clean the wipers with a lubricant or simply replace them with new ones. Steps for replacing wiper blades: 1. First, lift the existing wiper arm to a 90-degree angle and gently rotate the wiper blade to a certain position. 2. Then, press the connector button between the wiper blade and the wiper arm to remove the old wiper. 3. Installation follows the reverse order of the removal steps.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.