What is the fuel consumption per 100 kilometers for the Haval H6?

1 Answers
OAnderson
07/29/25 8:06pm
Haval 1.3T model weighs 1610kg with a 139 horsepower engine, fuel consumption range is 8.00~10.43L, average fuel consumption is 9.21L. Haval 2.0T model weighs 1720kg with a 150 horsepower engine paired with a 6-speed manual transmission, fuel consumption range is 6.39~8.23L, average fuel consumption is 7.31L. Relevant information is as follows: Fuel consumption: The main reasons for the high fuel consumption of Haval H6 still lie in the two major components of engine and transmission. The 1.5T engine has relatively weak power output and not very high fuel utilization rate. Coupled with a 2-ton body, even with higher displacement, it is difficult to have sufficient power and reduce fuel consumption. Therefore, vehicle lightweight and engine control technology need to be further improved. Notes: Fuel consumption is mainly determined by the user's driving habits. Avoid long-term idling, as idling consumes a lot of fuel. When waiting for traffic lights, you can turn off the engine and pull up the handbrake, or use the automatic start-stop function. On highways, try to drive at a constant speed, preferably between 60-90km/h, and maintain the engine speed at 2500-4000rpm.
Was this review help?
7
0
Share
More Forum Discussions

What is the Function of a Shock Absorber?

The function of a shock absorber is to dampen the oscillations from the spring's rebound after absorbing shocks and the impacts from the road surface. When driving over uneven roads, although the suspension spring can filter out road vibrations, the spring itself still undergoes reciprocating motion. The shock absorber is designed to suppress this spring bouncing. If the shock absorber is too soft, the vehicle body will bounce up and down excessively. Conversely, if the shock absorber is too stiff, it will create excessive resistance, hindering the spring's normal operation. During modifications to the suspension system, stiff shock absorbers should be paired with stiff springs. The stiffness of the spring is closely related to the vehicle's weight, which is why heavier vehicles typically use stiffer shock absorbers.
20
4
Share

Does the Shadow Leopard have wireless charging?

The Shadow Leopard does not have a wireless charging function. Introduction to in-car wireless charging: Inside the wireless charging pad, there is a coil that generates a magnetic field when electrified. This magnetic field is then captured by the coil in the phone, converting the magnetic field back into electric current to charge the phone. In-car wireless charging can free users from the constraints of wires, but it has insufficient charging stability, low charging efficiency, and tends to generate significant heat. Introduction to models equipped with in-car wireless charging panels: Currently, many models are equipped with wireless charging panels, such as the GAC Trumpchi GS4, Lynk & Co 01, BMW X3, Roewe RX8, and Cadillac CT6.
19
5
Share

Does the BYD Qin Pro Have Ambient Lighting?

BYD Qin Pro is equipped with ambient lighting, which does not have an independent switch. As the sky gradually darkens, the ambient lighting will automatically turn on along with the headlights. Also known as LED ambient lighting, it is primarily designed to enhance the cabin's aesthetics at night, creating an atmosphere and setting the mood. In terms of body dimensions, the BYD Qin Pro measures 4765 mm in length, 1838 mm in width, and 1500 mm in height, with a wheelbase of 2718 mm. As for the powertrain, the BYD Qin Pro fuel-powered version is equipped with a 1.5T engine across the lineup, delivering a maximum power of 154 horsepower and a peak torque of 240 Nm.
8
1
Share

How to Remove the Rear Seat of the Nissan Sylphy Classic?

The method for removing the rear seat of the Nissan Sylphy Classic is as follows: 1. Reach under the seat cushion and forcefully lift the front part upward until the front hooks are released. This action needs to be performed once on both the left and right front sections; 2. After lifting the front part, insert your left hand under the side, push the seat cushion toward the backrest with your right hand, and while pushing it in slightly, use your left hand to lift the rear part. This action also needs to be performed once on both the left and right sides; 3. After removing the seat cushion, unscrew the three screws under the rear backrest, lift it upward, and the rear backrest can be removed.
9
0
Share

How to Replace the Rear Wiper on a Ford Kuga?

Ford Kuga rear wiper replacement steps: 1. First lift the wiper arm to engage its self-locking mechanism. 2. Then use your right hand to pinch the two dovetail clips. 3. Rotate the wiper blade at a certain angle and pull it upward to remove. 4. Install the new wiper blade by aligning its front notch with the small head of the wiper arm, then pull the blade downward while pinching the two dovetail clips. 4. Rotate the blade clockwise at a certain angle to secure it in position. 5. After confirming proper installation, gently place the wiper arm back onto the windshield. 6. Use the same method to replace the driver-side wiper blade.
6
3
Share

How to Install the Clutch Pedal Spring on a Ford Focus?

The clutch pedal spring of a Ford Focus cannot be installed by yourself and requires professional installation at a repair shop. During driving, the driver can press or release the clutch pedal as needed to temporarily separate and gradually engage the engine and transmission, thereby cutting off or transmitting the power input from the engine to the transmission. The Ford Focus is a compact car under the Ford brand. In terms of body dimensions, the car measures 4647mm in length, 1810mm in width, and 1468mm in height. In terms of power, the Ford Focus is equipped with two engines: a 1.0T and a 1.5T. The 1.0T engine has a maximum power output of 94kw, while the 1.5T engine has a maximum power output of 135kw.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.