What is the fuel consumption per 100 kilometers for the Great Wall 300 Urban Edition?

What is the correct way to use the handbrake?

The correct method for operating the handbrake is as follows: 1. Press the handbrake button while pulling the handbrake. When pulling the handbrake, the button on the handbrake lever will move back and forth due to the spring inside. To prolong the lifespan of the spring and the button, it's best to press the button with the pad of your thumb while pulling the handbrake. This method is quieter than pulling the handbrake directly and better protects the handbrake. 2. Apply gentle force when pulling the handbrake. Avoid yanking the handbrake abruptly, as this can damage it over time. The correct approach is to pull the handbrake smoothly and gently, ensuring you can clearly hear the clicking sound of the handbrake engaging.

15

0

Share

What are the requirements for obtaining a C1 driver's license?

Here are the requirements for obtaining a C1 driver's license: 1. Age requirement: Between 18 and 70 years old. 2. Height requirement: Must be at least 150 cm tall. 3. Vision requirement: For individuals with monocular vision impairment, the naked or corrected visual acuity of the right eye must reach 5.0 or above on the logarithmic visual acuity chart, with a horizontal field of vision of at least 150 degrees, allowing them to apply for small cars and small automatic transmission vehicles. 4. Color discrimination: No red-green color blindness. 5. Hearing requirement: Able to discern the direction of sound with each ear at a distance of 50 cm from a tuning fork. Individuals with hearing impairments who can meet the above conditions with hearing aids may apply for a motor vehicle driver's license for small cars and small automatic transmission vehicles. 6. Upper limb requirement: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement functions. However, individuals with missing fingertip joints or those with three intact fingers on the left hand and complete palms on both hands may apply for a motor vehicle driver's license for small cars, small automatic transmission vehicles, low-speed trucks, and three-wheeled vehicles. 7. Lower limb requirement: Both lower limbs must be intact with normal movement functions, and the length difference should not exceed 5 cm. However, individuals with a missing left lower limb or impaired movement function may apply for a motor vehicle driver's license for small automatic transmission vehicles. 8. Trunk and neck: No movement dysfunction.

7

4

Share

How to Adjust the Rearview Mirror of an Exam Vehicle?

Exam vehicle rearview mirror adjustment methods are as follows: 1. The rearview mirror adjustment button for the Subject 2 exam is located on the inner side of the front door and can be adjusted in four directions: up, down, forward, and backward. When adjusting forward and backward, the car body should occupy one-fourth of the rearview mirror area. The rearview mirror must be adjusted after the position is properly set and the posture is correct. 2. After getting into the car, adjust the seat and backrest to maintain a normal driving posture, then start adjusting the rearview mirror. The rearview mirror adjustment button is on the inner side of the front door and can be adjusted in four directions: up, down, forward, and backward. 3. Up and down adjustment is simple. For Subject 2, to see the ground markings clearly, press it to the lowest position. Here are some additional tips: 1. The Subject 2 exam consists of 5 items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and turning on a curve. A score of 90 or above out of the 5 items is considered passing. 2. After getting into the car, always remember to fasten the seat belt, adjust the seat and rearview mirror. The safety officer will come over to ask if you are ready and then help you start the exam. After the exam starts, try to slow down the speed, but you must not stop, otherwise you will fail directly. 3. After starting, remember to turn on the turn signal, otherwise points will be deducted. The first item is the most difficult: reversing into a garage. Before entering the exam area, adjust the distance between the car body and the left line. When reversing, turn the steering wheel quickly, and finally, make sure the entire car body is parked in the garage. Even if the car is a bit crooked, it doesn't matter as long as it doesn't cross the line, it's considered passing.

9

3

Share

How Many Months Old is Considered a Stock Car?

There is no set time point or definition for a stock car. Normally, a car goes through production, assembly line completion, distribution to the main dealer, storage in the main warehouse, and then to sub-dealers, all of which take a certain amount of time. Typically, a stock car refers to a vehicle that has remained unsold in the main warehouse for over a year. Below is relevant information: 1. Long-term parking is most harmful to cars. The correct practice for dealers handling stock cars is to periodically charge the battery and perform maintenance on vehicles that have been in the main warehouse for over 6 months without being sold. They should also start the engine to circulate fluids and move the vehicle to prevent tire aging. 2. Identifying a stock car is a very simple matter. Check the manufacturing date on the vehicle's nameplate and the production date on the certificate of conformity—both must match. Additionally, verify that the VIN code and engine number on the certificate of conformity match those on the original vehicle. 3. For inspecting stock cars, those over a year old should be checked for exterior paint discoloration, wiper blade and tire aging to determine whether they were stored indoors or outdoors. Inspect the engine compartment belt pulley and door/window seals for integrity. After turning off the engine, leave the headlights on for 10 minutes to see if the battery can start the vehicle normally. Observe whether the engine runs smoothly without abnormal vibrations to assess performance.

14

0

Share

Can a car be modified to have a sunroof?

In theory, a car can be modified to have a sunroof, but there are certain risks involved. During production, cars with sunroofs use special materials and undergo various crash tests to determine the safest method for installing the sunroof. Unauthorized modifications to add a sunroof can compromise the car's original structure, posing significant safety hazards. Sunroof maintenance tips: 1. Pay attention to the waterproofing of the sunroof. The sunroof is sealed with a rubber gasket, so it's important to keep the gasket free of dust during use, especially in winter or after long trips. Regularly clean it with a duster. Additionally, never force open the sunroof when it's frozen, as this can damage the sunroof motor. In seasons with heavy wind and sand, clean the gasket with a sponge every two months. 2. For electric sunroofs, it's best not to fully open the sunroof on bumpy roads, as excessive vibration between the sunroof and the sliding rails can cause deformation of related components or even damage the motor.

18

3

Share

How to Brake Correctly While Driving?

The correct method of braking involves gently pressing the brake over a long distance; emergency braking; and braking when coming to a stop. Also known as deceleration, it refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other means of transport, or machinery. A wheel is fixed on the high-speed shaft of the machine, and brake shoes, bands, or discs compatible with it are installed on the machine base, generating a braking torque under external force.

4

2

Share

What is the fuel consumption per 100 kilometers for the Great Wall 300 Urban Edition?

What is the correct way to use the handbrake?

What are the requirements for obtaining a C1 driver's license?

How to Adjust the Rearview Mirror of an Exam Vehicle?

How Many Months Old is Considered a Stock Car?

Can a car be modified to have a sunroof?

How to Brake Correctly While Driving?

What is the correct starting method for an automatic transmission with one-button start?

What Does Subject 1 Specifically Test?

Where is the ABS sensor located?

Why Does the Engine Malfunction Light Keep Coming On?