What is the fuel consumption per 100 kilometers for the Fengjun 5 with a 2.4L gasoline engine?

1 Answers
Henderson
07/30/25 2:06am
The Fengjun 5 with a 2.4L gasoline engine consumes 11 liters of fuel per 100 kilometers. Here are the detailed specifications of the Fengjun 5: 1. Performance Overview: The 2.4L gasoline version consumes 11 liters of fuel per 100 kilometers. The Fengjun 5 is a pickup truck under the Great Wall brand, equipped with three types of engines: a 2.2L naturally aspirated engine, a 2.4L naturally aspirated engine, and a 2.0L turbocharged diesel engine. 2. Configuration Details: The 2.4L naturally aspirated engine delivers 122 horsepower and a maximum torque of 200 Nm. This engine reaches its peak power at 5,250 rpm and achieves maximum torque between 2,500 and 3,000 rpm. It features multi-point fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block.
Was this review help?
10
1
Share
More Forum Discussions

Can the Starter Be Repaired?

Starter can be repaired. Introduction to Starter: The electric starter (commonly referred to as the motor or starter) utilizes electromagnetic induction to rotate the starter rotor. The small gear on the rotor then drives the engine flywheel to rotate, thereby turning the crankshaft and starting the engine. It incorporates two key component innovations: a new low-cost spark plug with a ceramic core base and the starter itself, which laid the technical foundation for automotive development. Reasons for Starter Malfunction: When the starter fails to operate properly, the drive gear does not rotate. This can be caused by various factors such as power line issues, burnt starter switch contacts, or excessive engine resistance. The repair method typically involves fixing the wiring harness.
5
1
Share

What does Jetta GIF mean?

Jetta GIF is the Jetta Millionth Edition commemorative model. Below are some related introductions about Jetta: 1. Power: Equipped with a 1.4L EA211 engine, it delivers a maximum power output of 66kW at 5500 rpm and a maximum torque of 132N.m at 3800 rpm. The small-displacement engine not only provides users with lower vehicle operating costs but also achieves energy efficiency and environmental friendliness. 2. Interior: The black interior features gray stitching on the seats, steering wheel, and handbrake, creating a contrasting effect that breaks the monotony of the black interior.
17
3
Share

What Causes the Car Not to Move When the Handbrake is Released?

Handbrake issues: This situation may be caused by a problem with the handbrake, specifically a part of the handbrake getting stuck. Try pressing the foot brake several times in a row while also pulling and releasing the handbrake multiple times. This action of repeatedly lifting and lowering the handbrake can help resolve minor sticking issues. Rear drum brake issues: If the rear drum brake is stuck, it may remain locked even after releasing the handbrake. First, remove the rear wheel and then open the drum cover. Check if rust is causing the brake to lock. Prepare some WD40 and spray it inside, then test the brake by pressing it several times until the issue is resolved.
1
3
Share

What are the reasons for the slow temperature rise in the Sagitar's coolant?

The reasons for the slow temperature rise in the Sagitar's coolant are: 1. The thermostat is not installed or is damaged. The thermostat controls the direction of the coolant flow, managing the large and small circulation loops. When the thermostat fails, the coolant remains in the large circulation loop, causing the engine's temperature to drop quickly. 2. Scale buildup on the temperature sensor can reduce its sensitivity, leading to inaccurate temperature readings. 3. A malfunction in the cooling fan circuit system can cause the engine to remain in forced cooling mode for extended periods. 4. Turning on the heater immediately after starting the car can slow down the temperature rise, as the car's heating system relies on the heat from the engine's coolant.
8
1
Share

What is the difference between automatic and semi-automatic transmissions?

The differences between semi-automatic and automatic transmissions are: 1. Different control over gears: Semi-automatic models allow manual control of gears, enabling faster shifting; automatic transmissions lack this level of flexible control. 2. Different fuel consumption: Semi-automatic transmissions are more fuel-efficient, resulting in lower vehicle operating costs; automatic transmissions offer fewer gear options, inadvertently increasing fuel consumption and raising vehicle operating costs. 3. Different operation methods: A semi-automatic transmission combines manual and automatic shifting modes. Manual transmissions allow free adjustment of gears and RPM, providing a smooth and exhilarating driving experience with a strong sense of sportiness, enhancing driving pleasure.
17
4
Share

How to adjust the audio system in the Encore?

To adjust the audio system in the Encore: After entering the system, there is a settings button in the upper right corner. Click to access the sound settings where you can adjust the bass and treble. The audio system is designed to alleviate the monotony of travel for both the driver and passengers. Taking the 2020 Encore Base model as an example, its body dimensions are: length 4295mm, width 1798mm, height 1607mm, with a wheelbase of 2570mm. The 2020 Encore Base model features a MacPherson strut front suspension and a compound torsion beam rear suspension. It is equipped with a 1.0L turbocharged engine, delivering a maximum horsepower of 125PS, maximum power of 92kW, and maximum torque of 180Nm, paired with a 6-speed automatic transmission.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.